Wednesday, July 29, 2015

Grand Rapids 25, Surface Grinder, Parts List Manual Year (1946)

http://www.industrialmanuals.com/grand-rapids-surface-grinder-parts-list-manual-year-1946-p-875.php 


Grand Rapids 25, Surface Grinder, Parts List Manual Year (1946) 
Grand Rapids 25, Surface Grinder, Parts List Manual Year (1946) 

Grand Rapids Parts No 25 Surface Grinder Manual


This Manual Covers Models:
25

This Manual Includes:

Parts Lists
Gallmeyer Livingston Grand Rapids Grinders
No. 20 & 25 Spindle Motor Assembly
No. 20 & 25 Wheel Spindle Assembly
No. 25 & 28 Micro Elevating Mechanism
No. 25 & 28 Cross Feed Screw Mechnism
No. 25 & 28 Longitudinal Handwheel Sleeve Section
No. 25 & 28 Table control Valve & Table Dog Assembly
Much More!!!


This Manual Has 30 Printed Pages, Diagrams Year 1946

Graham Operators C-200 Install Maintenance Parts Hydraulic Press Brake Manual

http://www.industrialmanuals.com/graham-operators-c200-install-maintenance-parts-hydraulic-press-brake-manual-p-1150.php 


Graham Operators C-200 Install Maintenance Parts Hydraulic Press Brake Manual 
Graham Operators C-200 Install Maintenance Parts Hydraulic Press Brake Manual 

Graham Operators C-200 Installation Maintenance Parts Hydraulic Press Brake Manual     

This Manual Covers Models:
C-200

This Manual Includes:

General Information
General Safety Habits
Unloading
Placement
Pressure Regulator
Three Speed Travel of Ram
Power Ram Adjustment
Running and Set Up Controls
Decompression
Punching Instructions
Preventative Maintenance
Parts Lists

This Manual Has 37 Printed Pages.
Year 1978

Govro Nelson 300, 33 & 46, Air Hydraulic Drill Tapping Units Maintenance Manual

http://www.industrialmanuals.com/govro-nelson-hydraulic-drill-tapping-units-maintenance-manual-p-3324.php 


Govro Nelson 300, 33 & 46, Air Hydraulic Drill Tapping Units Maintenance Manual 
Govro Nelson 300, 33 & 46, Air Hydraulic Drill Tapping Units Maintenance Manual 

Govro Nelson 300,33 & 46, Air Hydraulic Drilling and Tapping Units, Instruction and Maintenance Manual Year (1976)

This Manual Covers Models: 
300
33
46


This Manual Includes:

Operation, Maintenance and Wiring
Automatic Drilling & Tapping Units
Dirt & Rust Problems
Data Sheets
Wiring Diagrams
Set up and Operations:
Air Line Pressure
Mounting
Air Connection with Standard Solenoid Valve
Electrical Connection
Control Circuit
Hydraulic System
Adding Oil to the Hydraulic System
Air Entrapment
Service and Purging
Lubrication
Length of Stroke Adjustment
Rate of Feed and Rapid Approach Adjustment

Disassembly and Reassembly
Instructions Models 300-P, 33-P and 46-P Peck Drilling Units
Tapping Units
Drill and Tap Units
Wire Diagrams and Machine
This Manual Has  36 Printed Pages.
Year June 1976

Gould Eberheardt Table of Decimals Fractions Logarithms Constants Manual

http://www.industrialmanuals.com/gould-eberheardt-table-decimals-fractions-logarithms-constants-manual-p-984.php 


Gould Eberheardt Table of Decimals Fractions Logarithms Constants Manual 

Gould Eberhardt Table of Decimals Fractions Logarithms Constants Manual

This Manual Covers Models:
Reference Information

This Manual Includes:
Tables of Decimal Equivalents of Fractions
Prime Factors
Logarithms of Gear Ratios
C Constants
Methods of Interpolation   
This Manual Has 56 Printed Pages. 5 Diagrams Year 1940

Gould Eberhardt Parts List 16 to 48 H HS Manufactureres Gear Hobbers Manual

http://www.industrialmanuals.com/gould-eberhardt-parts-list-manufactureres-gear-hobbers-manual-p-987.php 


Gould Eberhardt Parts List 16 to 48 H HS Manufactureres Gear Hobbers Manual 

Gould Eberhardt Parts List 16 to 48 H HS Manuf Type Gear Hobbers Manual

This Manual Covers Models:
16
thru
48


This Manual Includes:

Parts Lists
Index Sheet
Swivel Heads
Worm and Gear Drive   Hob Slides
Stanchion and Sheave Wheel Bearing
Gear Case    Oil Pump
Motor Drive       



This Manual Has 20 Printed Pages. Diagrams

Goss De Leeuw Parts 8 Spindle Work Rotator Machine Manual

http://www.industrialmanuals.com/goss-leeuw-parts-spindle-work-rotator-machine-manual-p-962.php 


Goss De Leeuw Parts 8 Spindle Work Rotator Machine Manual 

Goss DeLeeuw Parts 8 Spindle Work Rotator Machine Manual

This Manual Covers Models:
No. 7
#7
8 Spindle

This Manual Includes:
9 Parts Diagrams and 4 Assembly Illustrations
Gear Charts (T-4338)
Spindle Drive Development 6" Work Rotating 8 Spindle
Section Thru Lock Bolt Lever Mechanism
Main Spindle & Motor Brake
Feed and Index Gearing Development
Front View of Feed and Index Gear Box # 3778
Feed And Index Gear Box Trip Development A-6895
Rear View of Feed And Index Gear Box 3766
Xtra Foldouts with Manual:
Collet Chuck Front Gear and Forge T-4390
10 Page Fold-out of #7 8 Spindle Machine
Spindle Lock Pawl Bracket Assembly A6327B
Large Fold-out Accelerating Tool Bar Assembly A6825D
This Manual Has  13 Printed Pages. Diagrams and Illustrations
Year 1942 Complete Manual

Goss & De Leeuw 1", 2" & 3", Chucking, Operations Maintenance & Parts Manual

 http://www.industrialmanuals.com/goss-leeuw-chucking-operations-maintenance-parts-manual-p-3326.php


This Machine was made in Connecticut, USA.

Goss & De Leeuw 1", 2" & 3", Chucking, Operations Maintenance & Parts Manual 
Goss & De Leeuw 1", 2" & 3", Chucking, Operations Maintenance & Parts Manual 

Goss & Deleeuw 1-2-3”, Chucking Machine, Operations  Maintenance and Parts Manual

This Manual Covers Models: 
1”
2”
3”

This Manual Includes:

Preventive Maintenance
Installation Instructions – Foundation Diagram
Electrical
Lubrication
Mechanical Automatic Lubrication for Bed Ways (Optional)
Machine Operation
Boring Slides
threading Slide
Tooling Data and Charts
Chucks
Machine Adjustments
thread Safety Interlock
Long Threading Control
Recommended Repair Parts List
This Copy is Intellectually Sound
This Manual Has  26 Printed Pages.

Antarctica is like a machine with no lubication

Some areas in Antarctica haven't seen rain or snow in millions of years.
Antarctica, know as the coldest place on earth, is also the driest.
Although the average precipitation for the whole of the continent varies between 1.9 inches to over 7.8 inches (50-200mm) per year, there are dry valleys which receive less than 0.4 inches per year.  The temperatures are also extremely cold in these areas. 13 Degrees Fahrenheit (-25 degrees Celsius) is the norm in December and January which feels even colder due to strong winds. This means that although precipitation is low, snow never really melts and these areas may look the same for millions or years.
Survival in the dry valleys of Antarctica is nearly impossible, but it proved to be of use to scientists in 2009, who visited these parts to test scientific equipment to be used on the surface of Mars. In dryness and coldness Antarctica is the most similar place to Mars on earth. The average temperature on Mars is about -8 degrees Fahrenheit (-60 degrees Celsius).

Tuesday, July 28, 2015

Gould Eberhardt Parts List 16 Speed Tool Room Industrial Shapers Manual

http://www.industrialmanuals.com/gould-eberhardt-parts-list-speed-tool-room-industrial-shapers-manual-p-972.php 


Gould Eberhardt Parts List 16 Speed Tool Room Industrial Shapers Manual 
Gould Eberhardt Parts List 16 Speed Tool Room Industrial Shapers Manual 

Gould Eberhardt Parts List 16 Speed Tool Room Industrial Shapers Manual

This Manual Covers Models:
16 Speed

This Manual Includes:
Instructions for Ordering Parts
Attachments Illustrated on 4 Sheets
Index, Tool Head, Slotted Top Ram and Lever,
Cross Rail, Box Table and Slide
Universal Table and Slide
Vise, Electric Clutch and Brake, Transmission
Mechanical Clutch and Brake
Feed and Rapid Traverse, Feed Drive, Crank Gears,
Crak Plate and Stroke Adjustment
Lubrication Pump and Mechanical Type Filter
Lubrication Pump and Replaceable Element type Filter
Frame, Base and Motor Drive
Front Hand Feed Attachments, Power Downfeed Attachments
Much More!!!
This Manual Has 23 Printed Pages. Year 1956

Gould Eberhardt Operators Insturction 9H Manufacturing Type Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-insturction-manufacturing-type-gear-hobbing-manual-p-985.php 


Gould Eberhardt Operators Insturction 9H Manufacturing Type Gear Hobbing Manual 

Gould Eberhardt Operating Instruction 9H Univ Manufacturing Type Gear Hobbing Manual

This Manual Covers Models:
9H
No. 9H

This Manual Includes:
Machine Controls
Oiling Instructions Work Spindle Stanchion Pulley and Cutter Coolant
Setting Work
Operation of Machine for Hobbing Spur Gears
Operation of machine for Helical Gears
Adjustments     
Much More!!!
This Manual Has 13 Printed Pages. 2 Diagrams Year 1929

Gould Eberhardt Operators Instructions 18-H 36-H Auto Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instructions-auto-gear-hobbing-manual-p-988.php 


Gould Eberhardt Operators Instructions 18-H 36-H Auto Gear Hobbing Manual 
Gould Eberhardt Operators Instructions 18-H 36-H Auto Gear Hobbing Manual 

Gould Eberhardt Operators Instructions 18-H 36-H Auto Gear Hobbing Manual

This Manual Covers Models:
18-H
36-H

This Manual Includes:
Instructions for Oiling
Cutting Helical Gears
Cutting Worm Wheels
Multiple Thread Worm Wheels
Care and Adjustments of Machines
Hob Positioning Sharpening Hobs and Cutters
Dimensions of Hobs
Estimating Production Chart
Arranging Gears On Machine Index Gears
Table of Feed Constants for Various Pitches Angles and Feeds
Erecting Plan 18-H Hobber
Erecting Plan 36-H Hobber
Work Mandrel Details 
Much More!!!
This Manual Has 56 Printed Pages. Diagrams Year 1936

Gould Eberhardt Operators Instruction T Room Industrial Shaper Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instruction-room-industrial-shaper-manual-p-974.php 


Gould Eberhardt Operators Instruction T Room Industrial Shaper Manual 
Gould Eberhardt Operators Instruction T Room Industrial Shaper Manual 

Gould Eberhardt Operators Instruction Tool Room Industrial Shaper Manual

This Manual Covers Models:
16 Speed

This Manual Includes:
Beginning with Serial Number 4950A
Instructions for ordering Parts
Attachments, Index,, Tool Head, Ram and Lever
Cross Rail, Work Table and Slide 16" and 20"
Cross rail, Work Table and Slide for 24" and 36" Shapers
Universal Table and Vise
Transmission, Feed and Rapid Traverse, Feed Drive
Crank Gears, Crank Plate and Stroke Adjustment
Lubrication Pump and Filter
Frame, Base and Motor Drive, Front Hand Feed attachments
Power Down Feed , Automatic Tool Lifter Attachments
Vertical Rapid Traverse Attachment
Much More!!!
This Manual Has 20 Printed Pages.

Gould Eberhardt Operators Instruction 24H Manufacturers Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instruction-manufacturers-gear-hobbing-manual-p-979.php 


Gould Eberhardt Operators Instruction 24H Manufacturers Gear Hobbing Manual 
Gould Eberhardt Operators Instruction 24H Manufacturers Gear Hobbing Manual 

Gould Eberhardt Operators Instruction 24H Manufacturers Gear Hobbing Manual

This Manual Covers Models:
24H

This Manual Includes:

Oiling Instructions, Hob Unit Housings, BiJur Automatic Lubricating System
BiJur Service Parts for Lubricator TypeM
Machine Controls and Hob Speeds, Electrical Controls, Climb Hobbing UpFeed
Operations of the Machine, Hob Spurring Gears, Change Gear Calculations
Hobbing Helical Gears Non-Differentially, Limitations and Not within Limits
Dual-Lead Hob Spindle Worm and Gear, Adjustments, Swivel Head
How to Remove Hob Swivel Head, The Hobbing Method of Cutting Gear Teeth
Diagrams


This Manual Has 53 Printed Pages. 6 Diagrams Year 1951

Gould Eberhardt Operators Instruct 8H Univ Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instruct-univ-gear-hobbing-manual-p-986.php 


Gould Eberhardt Operators Instruct 8H Univ Gear Hobbing Manual 
Gould Eberhardt Operators Instruct 8H Univ Gear Hobbing Manual 

Gould Eberhardt Operators Instruction 8H Universal Gear Hobbing Manual

This Manual Covers Models:
8H
No. 8H

This Manual Includes:
Instructions for Operating
Oiling Instructions for
Gear Case
Work Spindle
Stanchion
Index Worm Bearing Pulley and Cutter Coolant
Machine Controls:
Power Rapid Traverse Lever
Hob Slide Stanchion Positioning Shaft
Starting and Feed Lever
Trip Dog
Hob Slide Power Traverse Cam Plate
Swivel Head Clamping Nuts
Shaft
Safety Plunger and Resetting Lever
Hob Speed Gears and Index Gears
Spur Gears Setting
Estimating Production
Tables and Adjustments 
Much More!!!
This Manual Has 27 Printed Pages. Diagram Year 1929

Gould Eberhardt Operators Instruct 60 S Gear Cutting Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instruct-gear-cutting-manual-p-980.php

Gould Eberhardt Operators Instruct 60 S Gear Cutting Manual 
Gould Eberhardt Operators Instruct 60 S Gear Cutting Manual 

Gould Eberhardt Operators Instruction 60 S Gear Cutting Manual

This Manual Covers Models:
60 S

This Manual Includes:
General Instructions
Oiling instructions
Pulley Unit
Heavy Cylinder Oil Stations
BiJur Instructions Lubricator Type P and R
Gear Cutter Machine Controls
Feed Safety Stops
Instructions for Figuring Production Time On Disc Cutter
Cutter Spindle Adjustments and Driving Worm Gear Carriage Adj
Backlash Adjustment between Cutter –Spindle Worm and Gear
Dual Lead Index Worm and Gear Adjustments
Much More!!!
This Manual Has 24 Printed Pages.  Diagrams Year 1953

Gould Eberhardt Operators Instruciton 48H Universal Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-instruciton-universal-gear-hobbing-manual-p-978.php 


Gould Eberhardt Operators Instruciton 48H Universal Gear Hobbing Manual 
Gould Eberhardt Operators Instruciton 48H Universal Gear Hobbing Manual 

Gould Eberhardt Operators Instruction 48H Universal Gear Hobbing Manual

This Manual Covers Models:
48H

This Manual Includes:

General Instructions, Oiling Instructions, Work Spindle and Index Worm
Filter and heavy Cylinder Oil, Stanchion, Individual Signt Feed Oilers & Grease Cups
Cutter Coolant, Index Worm 5-20-43, Machine Controls, Maximum Recommended Hob Speed
How to Install the Hob Arbor, Setting the Hob, Speed and Index Gears
Spur Gears, Index Gears Feed Gears Setting the Work
Depth of Cut, InFeed Mechanism with Pre-Set Adjustable Stop
Hobbing Helical Gears without Using Differential, Feed Change Gearing
Re-cutting a Number of Gears After First Cut, Hobbing Helical Gears Using Differential
Lead Gears Etc., Limitations of the Differential Mechanism,
Helical Gear Not within the range of the Differential, Estimating Production
Extra Travel Required Hobbing Spur Gears, Guide for Cutting Speeds
Gear Tooth Parts, Adjustments to the Vertical Feed Screw Nut
Adjustments to the Hob Spindle and Diameter Fit,
Work Table Adjustments, Adjustments to the Main Drive Clutch
End Thrust of Index Worm, Adjustments to
Backlash and Tooth Contact between Dual lead Index Worm and Worm Gear
Wiring Diagram, Gear Changes and Specifications


This Manual Has 35 Printed Pages. 2 Diagrams Year 1966

Gould Eberhardt operators 16 to 48 Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operators-gear-hobbing-manual-p-981.php 


Gould Eberhardt operators 16 to 48 Gear Hobbing Manual 
Gould Eberhardt operators 16 to 48 Gear Hobbing Manual 

Gould Eberhardt Operators 16 to 48 Gear Hobbing Machines Manual

This Manual Covers Models:
16
to
48

This Manual Includes:
Beginning with Serial No. 6700-A
Machine Size and Type
Index Ratio
Options Supplied
General Instructions
Lifting the Machine and Lubrication
Machine Controls
Electric Controls
Feed And Traverse Trips
Angular Setting of Swivel Head and Installing the Arbor
Climb Hobbing Upfeed
Hobbing Helical Gears-Non-Differentially and Differentially
Resetting the Device and Ratio Gears
Milling Worms and Estimating Production
Selecting Speeds and Diametral Pitch Tooth Sizes
Circular and Module Pitch Tooth Sizes
Machine Adjustments and Maintenance
Setup and Production Record Form 
Much More!!!
This Manual Has 117 Printed Pages.  Diagrams Year 1960

Gould Eberhardt Operator Instruction Shaper Manual

http://www.industrialmanuals.com/gould-eberhardt-operator-instruction-shaper-manual-p-973.php 


Gould Eberhardt Operator Instruction Shaper Manual 

Gould Eberhardt Operators Instruction Tool Room Industrial Shaper Manual

This Manual Covers Models:
14 Inch
16", 20", 24"
28", 32", 36"


This Manual Includes:
No. G-221 Industrial Manuals Inventory Listing
Setting Up Machine, Operation
Power downfeed to Tool Head
Lubrication Specifications, Adjustments
Repair Parts, Rapid Traverse Adjustments
Selection of Speed, Table of Dimensions
Electric Clutch
Much More!!!
This Manual Has 16 Printed Pages.

Gould Eberhardt Operator instruction 36 HS Spur Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-operator-instruction-spur-gear-hobbing-manual-p-977.php 


Gould Eberhardt Operator instruction 36 HS Spur Gear Hobbing Manual 
Gould Eberhardt Operator instruction 36 HS Spur Gear Hobbing Manual 

Gould Eberhardt Operators Instruction 36 HS Spur Gear Hobbing Manual

This Manual Covers Models:
36 HS
This Manual Includes:
Operating Instructions, oiling Instructions, Circulatory Pressure Lubrication
Hob Unit Housing, Bijur Pressure Lubrications, Cutting Fluids
Parts for lubricator Type M
Electrical Controls, Verical Feed and Power rapid Traverse Stops
Conventional Hobbing Downfeed
Hobbing Spur Gears, Guide for Hobbing Gears
Work Holding Devices and Dual Lead Hob Spindle Worm and Gear
Diagrams
Much More!!!
This Manual Has 43 Printed Pages. 
3 Diagrams 
Year 1951

Gould Eberhardt Change Gear Tables Auto Gear Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-change-gear-tables-auto-gear-hobbing-manual-p-989.php 


Gould Eberhardt Change Gear Tables Auto Gear Hobbing Manual 

Gould Eberhardt Change Gear Tables Auto Gear Hobbing Manual

This Manual Covers Models:
Reference Information

This Manual Includes:
Methods of Interpolation
Decimal Equivalents Of Fractions
Prime Factors of Numbers
Logarithms of Gear Ratios
Table of C Constants 
Much More!!!
This Manual Has 56 Printed Pages. Charts Year 1940

Sunday, July 26, 2015

Hanchett Sk-24, Slitter Knife Grinder, Parts Manual

http://www.industrialmanuals.com/hanchett-sk24-slitter-knife-grinder-parts-manual-p-3655.php 


Hanchett Sk-24, Slitter Knife Grinder, Parts Manual 


Hanchett SK-24, Slitter Knife Grinder, Parts Manual

This Manual Covers Models: 
SK-24
This Manual Includes:
Illustrated Parts Lists

This Manual Has 8 Printed Pages.

Hammond Instructions CBE-66 77 Oscillating Carbide Tool Grinder Manual

http://www.industrialmanuals.com/hammond-instructions-cbe66-oscillating-carbide-tool-grinder-manual-p-1020.php 


Hammond Instructions CBE-66 77 Oscillating Carbide Tool Grinder Manual 
Hammond Instructions CBE-66 77 Oscillating Carbide Tool Grinder Manual 

Hammond Instructions CBE-66 77 Oscillating Electrolytic Carbide Tool Grinder Manual

This Manual Covers Models:
CBE-66
CBE-77
This Manual Includes:
Installation
Set-Up Wheel End
Operation Cup Wheel End
Set-Up Chip Breaker End
Operation of Chip breaker End
Daily Maintenance
Periodic Maintenance
Diagrams
Bulletin OC-759 (Revised) Metal-Bonded Grinding Wheel
Service Instructions
Approved Lubricants
Parts List for Double Parallel Gear Motors
Installation and Operating Instructions for Regulators
Installation and Operating Instructions for Filters and Parts
Much More!!!
This Manual Has 40 Printed Pages. 1 Diagram Year 1959

Hammond Instruction Bulletin CBE-257 Electrolytic Chip Breaker Grinder Manual

http://www.industrialmanuals.com/hammond-instruction-bulletin-cbe257-electrolytic-chip-breaker-grinder-manual-p-1019.php 


Hammond Instruction Bulletin CBE-257 Electrolytic Chip Breaker Grinder Manual 
Hammond Instruction Bulletin CBE-257 Electrolytic Chip Breaker Grinder Manual 

Hammond Instruction Bulletin CBE-257 Electrolytic Chip Breaker Grinder Manual

This Manual Covers Models:
CBE-10
CBE-6
This Manual Includes:
Bulletin CBE-257
Operation:
Parallel Chip Breakers
Angular Chip Breakers
Daily Maintenance
Periodic Maintenance
Lubrication
Instruction Bulletin SCE-1256 Model SCE-6 & SCE-7 Oscillating Carbide Tool Grinder
Veelos V-Belt Installation Directions
FulFlo Filter Model B
Installation and Operating Instructions for Turbo Flo Air Line Filters
Installation and Operating Instructions for Non Relieving and Relieving Regulators
Installation and Operating Instructions for Perma Fog Air Line Lubricators
Parts Bulletin EG-261R Cup Wheel Grinder Model CBE-66 CBE-77
Wheel Dimensions
Much More!!!
This Manual Has 37 Printed Pages.

Hammond CBE-66 & CBE-77, Electrochemical Grinder, Instructions Manual 1968

http://www.industrialmanuals.com/hammond-cbe66-cbe77-electrochemical-grinder-instructions-manual-1968-p-3656.php 


Hammond CBE-66 & CBE-77, Electrochemical Grinder, Instructions Manual 1968 

Hammond CBE-66, CBE-77, Electrochemical Grinder, Instructions Manual Year (1968)

This Manual Covers Models: 
CBE-66
CBE-77

This Manual Includes:
Oscillating Electrolytic Carbide Tool Grinder
CBE-771
Installation
Setup – Cup Wheel End
Operation – Cup Wheel End
Setup chip Breaker End
Operation Chip Breaker End
Daily and Periodic Maintenance
Warning – electrolyte Danger
Installation Drawing
Layout Cables and Wiring
Bulletin OC-765 – Anocut Electrolytic Tool Grinding
General Information July 1965
Offhand or Face Wheel grinding
Peripheral Grinding
Service Instructions
Operating Instructions for Cuno Micro-Klean Filter Type CT-101
installation Directions for Veelos V-Belt and Measuring

Reliance Service and Repair-Master XL parallel Gearmotor & Reducer:
General Information
Maintenance
Regulators
Parts Bulletin EG-261R Hammond of Kalamazoo:
Parts Lists with Functionally illustrated Drawings
Wheel Dimensions for Hammond ECG machines


This Manual Has 44 Printed Pages.
Year 1968

Hamburg 70 Operators Pnematic Bench Type Tap 660 Press Brake Manual

http://www.industrialmanuals.com/hamburg-operators-pnematic-bench-type-press-brake-manual-p-1174.php 


Hamburg 70 Operators Pnematic Bench Type Tap 660 Press Brake Manual 


Hamburg 70, Tap Pneumatic Press Brake 660, Operators Bench Type Manual     

This Manual Covers Models:
70 
660

This Manual Includes:

Drawings E 2938e and E2979 The Press Brake Tools
Adjusting the Vee Die Block to the Fixed Top Tools
The Stroke Limiting Device
Lubrication
Rear Stop for the Sheets to be Bent
Protection Against Accidents
Pressure Chart for Bending Operation
Riegler Metzingen Installation and Operating Instructions for
Maintenance Units
Much More!!!


This Manual Has 10 Printed Pages.
Assembly Diagrams

Saturday, July 25, 2015

Gould & Eberhardt H-2, Hobber, Parts List No. 1644, Manual

http://www.industrialmanuals.com/gould-eberhardt-hobber-parts-list-1644-manual-p-3343.php

Gould & Eberhardt H-2, Hobber, Parts List No. 1644, Manual 

Gould & Eberhardt H-2, Hobber, Parts List No. 1644, Manual

This Manual Covers Models: 
H-2

This Manual Includes:

Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has  21 Printed Pages.

Gould & Eberhardt 48 HWD, 3000 Series, Gear Hobbing< Instructions Manual

http://www.industrialmanuals.com/gould-eberhardt-3000-series-gear-hobbing-instructions-manual-p-3342.php 


Gould & Eberhardt 48 HWD, 3000 Series, Gear Hobbing< Instructions Manual 
Gould & Eberhardt 48 HWD, 3000 Series, Gear Hobbing< Instructions Manual 

Gould & Eberhardt 48 HWD, 3021A-5 3020A-1 3020A-2, Gear Hobbing Machine, Instructions Manual

This Manual Covers Models: 
48HWD
3021A-5
3020A-1
3020A-2


This Manual Includes:

Machine Size and Type
Index Ratio
Options Supplies
General Instructions
Lifting the Machine
Lubrication
Machine Controls
Precaution Summary
Maximum Safe Hob Speed
Electric Controls
Feed and Traverse Trips
Angular Setting of Swivel Head
How to Install the Hob Arbor
Depth of Cut
Hobbing Upfeed
Setting the Hob
Hob Setting Gage
Hob Speed Change Gears
Index Change Gears (Gear Ratios)
Feed Change Gears
Mounting the Work
Hobbing Helical Gears-Non-Differentially
Angular Feed Chart
Resetting Device
Hobbing Helical Gears Differentially
Ratio Gears
Infeed Mechanism for Hobbing Wormgears
Feed Off-On Selector Switch
Hobbing Prime Spur Gears
Milling Worms
Estimating Production
Extra Travel Spur Gears
Selecting Hob Speeds
Diametrical Pitch Tooth Sizes
Circular Pitch Tooth Sizes
Module Pitch Tooth Sizes
Center Distance Reduction Chart
Comparative Sizes of Gear Teeth
Machine Adjustments
Location of Serial Number
Maintenance – General:
Temperature Rise and Seals
Ordering Repair Parts and Bearings
How to Remove Index Wormgear
How to Remove Hob Swivel Head
Variations in Hobbed Gear Sizes – (Probable Causes)
Work Holiday Fixtures
Set up and Production Record for Gear Hobbing and Cutting Form
This Copy is Intellectually Sound

16 to 48 Size Gear Hobbing Machine, Machine Controls
Beginning with Serial No. 6700A-1:
Electric Control Panel
H03 Slide
Stanchion
Stanchion Clamping Nuts
Nut
Feed Selector Switch
Adjustable Feed Stop
Scale and Vernier
Swivel Head Clamping Nuts
Shaft
hob Spindle clamping Nuts
Hob Positioning Device
Selector Level
Selector Switch
Resetting Device
Lower and Upper Traverse Stop
Hob Slide Lock Screw
Adjustable Micrometer infeed Stop
Shaft

72 H Machine Controls beginning with Serial No. 1990A-5

Machines Built 1960 and later have a serial number with five Digits prefixed by the letters G&E
This Manual Has  116 Printed Pages.

Gould & Eberhardt 16-48, Hobbing Machine, Parts Manual

http://www.industrialmanuals.com/gould-eberhardt-1648-hobbing-machine-parts-manual-p-3345.php 


Gould & Eberhardt 16-48, Hobbing Machine, Parts Manual 
Gould & Eberhardt 16-48, Hobbing Machine, Parts Manual 

Gould & Eberhardt 16 to 48, H and HS, No. 2339, Gear Hobbing Machine, Parts List Manual

This Manual Covers Models: 
16 to 48
No. 2339


This Manual Includes:

Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has  19 Printed Pages.

Gould & Eberhardt 16 to 48, Manufacturing Type Gear Hobbers, Parts Manual 1943

http://www.industrialmanuals.com/gould-eberhardt-manufacturing-type-gear-hobbers-parts-manual-1943-p-3348.php 


Gould & Eberhardt 16 to 48, Manufacturing Type Gear Hobbers, Parts Manual 1943 
Gould & Eberhardt 16 to 48, Manufacturing Type Gear Hobbers, Parts Manual 1943 

Gould & Eberhardt 16 to 48, Manufacturing Type Gear Hobbers, Parts List Manual Year (1943)

This Manual Covers Models: 
16 to 48

This Manual Includes:

Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has  20 Printed Pages.
Year June 1943

Gould & Eberhardt 12-72, H & HS, Gear Hobbing , G&E Instructions Manual 1960

http://www.industrialmanuals.com/gould-eberhardt-1272-gear-hobbing-instructions-manual-1960-p-3350.php 


Gould & Eberhardt 12-72, H & HS, Gear Hobbing , G&E Instructions Manual 1960 
Gould & Eberhardt 12-72, H & HS, Gear Hobbing , G&E Instructions Manual 1960 

Gould & Eberhardt 12-72, H & HS, Gear Hobbing Machine, G&E Instructions Manual

This Manual Covers Models: 
12-72
H
HS


This Manual Includes:

G & E 1008
Machine Size and Type
Index Ratio
Options Supplied
Genera Instructions
Lifting the Machine
Lubrication
Machine Controls
Precaution Summary
Maximum Safe Hob Speed
Electric Controls
Feed and Traverse Trips
Angular Setting of Swivel Head
How to Install the Hob Arbor
Depth of Cut
Climb Hobbing Upfeed
Setting the Hob
Hob Setting Gage
Hob Speed Change gears
Index Change Gears Feed Change Gears
Mounting the Work
Hobbing Helical Gears – NON-Differentially
Angular Feed Chart
Resetting Device
Hobbing Helical Gears Differentially
Ratio Gears
Infeed Mechanism for Hobbing Wormgears
Feed Off-On Selector Switch
Hobbing Prime Spur Gears
Milling Worms
Estimating Production
Extra Travel – Spur Gears
Selecting Hob Speeds
Diametral Pitch Tooth Sizes
Circular Pitch Tooth Sizes
Module Pitch Tooth Sizes
Center Distance Reduction Chart
Comparative Sizes of Gear Teeth
Machine Adjustments
Location of Serial Number
Maintenance – General:
Tem Rise and Seals
Order Repair Parts and Bearings
How to Remove Index Wormgear and Hob Swivel Head
Variations in Hobbed Gear Sizes
Work Holding Fixtures
Setup and Production Record Form

Basic Operation and Maintenance of G&E
This Manual Has  116 Printed Pages.
Year After 1960

Gould & Eberhardt 12 to 48, Universal & HS Spur Gear, No. 1337, Hobbing Manual

http://www.industrialmanuals.com/gould-eberhardt-universal-spur-gear-1337-hobbing-manual-p-3344.php 


Gould & Eberhardt 12 to 48, Universal & HS Spur Gear, No. 1337, Hobbing Manual 
Gould & Eberhardt 12 to 48, Universal & HS Spur Gear, No. 1337, Hobbing Manual 

Gould & Eberhardt 12 to 48, H Universal & HS Spur Gear, No. 1337, Hobbing Machine, Parts List Manual

This Manual Covers Models: 
12 to 48
No. 1337


This Manual Includes:

Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has  20 Printed Pages.