Warner & Swasey No. 4 Turret Lathe, M-1420 Lot 19, Service and Parts Manual 1941

http://industrialmanuals.com/warner-swasey-turret-lathe-m1420-service-parts-manual-1941-p-1827.php 

Warner & Swasey No. 4 Universal Ram Type Turret Lathe , M-1420 Lot 19, Service and Parts Manual Year (1941)        

This Manual Covers Models:
No. 4
Universal Ram Type
M-1420
Lot 19

This Manual Includes:Description
Installation
Maintenance
Repair Parts Lists
Erecting
Alignment
Headstock
Pre-selector
Cross Slide Carriage
Turret Slide and Saddle
Feed Train
Spindle Removal and Assembly
Speed & Feed Charts
Data Sheet
Repair Parts Section Plates 1 through Plate 22
Functional Illustrated Component Identification DiagramsThis Manual Has 56 Printed Pages.
Year 1941

Warner & Swasey No. 3, M-1200 - Start Lot 82, Turret Lathe, Service Manual 1953

http://industrialmanuals.com/warner-swasey-m1200-start-turret-lathe-service-manual-1953-p-2318.php 

Warner & Swasey NO. 3, M-1200 – Start Lot 82, Universal Ram Type Turret Lathe, Service Manual Year (1953)    

This Manual Covers Models:No. 3
M-1200
Start Lot 82

This Manual Includes: Installation SN 662920
Maintenance
Repair Parts

Erecting
Alignment
Headstock
Preselector
Cross Slide Carriage
Turret Slide and Saddle
Feed Train
Lubrication
Data Sheet with drawings, No. C-103108, September 1953

Repair Parts Section:
This is a composite repair parts section for all machines wihting the lot range
indicated on the cover. Repair parts plates for all standard machine attachments are also included.
Functional Illustrated Drawings (Plates) showing Component Identification
Plates 1 thru 29This Manual Has 70 Printed Pages.
Year 1941

Warner & Swasey No. 3, 4, 5 Turret Lathe Service, Parts & Instruction Manual

http://industrialmanuals.com/warner-swasey-turret-lathe-service-parts-instruction-manual-p-485.php 

Warner & Swasey No. 3, 4, & 5, M-2240, Universal Ram Type Turret Lathe Service and Parts Manual Year (1960)


This Manual Covers Models:
No. 3
No. 4
No. 5
M-2240
Starting at Lot 1

This Manual Includes:
Installation:
Introduction
Machine Data
Foundation
Moving the Turret Lathe
Cleaning
Electrical Connections
Lubrication

Alignment:
Introduction to Alignment
Alignment Procedure
Precision Alignment
Hexagon Turret Hole Alignment and Index Accuracy
Bar Feed Alignment

Adjustments and Assemblies:
Introduction
Hydraulic Collet Chuck and Bar Feed
Headstock
Cross Slide, Carriage and Carriage Apron Adjustments, Assembly and Disassembly

Lubrication and Preventive Maintenance:
Headstock Hydraulic System
Lubrication: Headstock, Square Turret, Cross Slide and Carriage
Hexagon Turret, Turret Slide and Saddle
Chuck and Power Chuck Wrench
Hydraulic Collet Chuck and Bar Feed

Plates 1-26 and Plates 52, 53, 54 Functional Illustrative Component Identifications
Machine Tool standard Data Sheet
Speed and Feed Chart M-2240
Hydraulic Collet Chuck & Bar Feed Schematic Diagram
Wiring Diagrams for Size 1.2.3.& 4 Two Speed Starters-Constant Torque-Consequent Pole Year (August 1957)
Wiring Diagram-Two Speed -Starter Sizes 1, 2 or 3 - 3 Phase Year (1954)
Schematic Diagram of Hydrualic Circuits (No. 4 m-2240, No. 5 M-2250, No. 5 M-2770 4 1/2 " Cap.)

This Manual Has 104 Printed Pages.
Diagrams
Year 1960

Warner & Swasey No. 2 Ram Type turret Lathe, M-1330 Lot 99, Service Parts Manual

http://industrialmanuals.com/warner-swasey-type-turret-lathe-m1330-service-parts-manual-p-1825.php 

Warner & Swasey 2 Six Speed Ram Type Turret Lathe, M-1330 Lot 99, Service Parts Manual Year (1946)        

This Manual Covers Models:
No. 2
Six Speed
Ram Type
M-1330
Lot 99

This Manual Includes:Machine Tool Standard Data Sheet
Repair Parts Section:
Functional Illustrated Component Identification Diagrams
Plate 2 through Plate 20
This Manual Has 19 Printed Pages.
Year 1946

Warner & Swasey No. 1 & 2 Electric, No. 2 All Geared Head Lathes Service Manual

http://industrialmanuals.com/warner-swasey-electric-geared-head-lathes-service-manual-p-1819.php 

Warner & Swasey No. 1 Electric, No. 2 Electric and No. 2 All Geared Head Turret Lathes Service Manual Year (1963)       

This Manual Covers Models:
No. 1 Electric
No. 2 Electric
No. 2 All Geared Head Turret Lathe

This Manual Includes:
Service Manual:
Installation
Maintenance
Repair Parts
Erection
Cleaning and Lubrication
Coolants
Alignment Instructions
Assemblies
High-Low Clutches
Cross Slide Adjustments and Assemblies
Turret Slide and Saddle Adjustments and Assemblies
Feed Train for No. 2 Turret Lathe
Collet Chuck and Bar Feed
Power Automatic Chuck and Bar Feed
Second Operation Work
1946 Data Sheet Lot 149
Repair Parts Section
Plate 1 thru Plate 20

This Manual Has 42 Printed Pages.
Year 1963

Warner & Swasey Handbook for Single Spindle Bar and Chucking Automatic Manual

http://industrialmanuals.com/warner-swasey-handbook-single-spindle-chucking-automatic-manual-p-1854.php 

Warner & Swasey Handbook for Single Spindle Bar and Chucking Automatic Manual Year (1967)         

This Manual Covers Models:
Reference Information
Operations

This Manual Includes:Introduction
How to Select Jobs for W&S Single Spindle Automatic
Useful Feed Stroke Combinations
Useful Machine Operations
Job Planning
Standard Tools
Setup Considerations
Some Practical Tips on Reducing Setup Time
Multiple Machine Operation
Slugging
Tape Controls for AC's and AB's
Horsepower, Torque and Tool Life
Speed and Feed Tables
0-AC Data
1AC Data
2AC Data
3AC Data
4AC Data
0AB Data
1AB Data
2AB Data
General Specifications
This Manual Has 165 Printed Pages.
Year 1967

Warner & Swasey 5 Spindle Automatic Machine , M-2540 Lot 119 Service Manual 1954

http://industrialmanuals.com/warner-swasey-spindle-automatic-machine-m2540-service-manual-1954-p-1824.php 

Warner Swasey 5 Spindle Automatic Machine M-2540, Lot 119, Service Manual Year (1954)

This Manual Covers Models:
5 Spindle
M-2540

This Manual Includes:Instructions for Lubricator Type A P
Fifth Position Threading Stroke Setting Chart
Threading Feed Setting Chart
Table of Constants TC and TR for Calculating Threading Time on M-2540
M-2511 High Speed Drilling attachment Change Gears
M-2511 High Speed Drilling Attachments
M-2515 & M-2518 Universal & Plain Threading Attachment Drive Change Gears
Chart of Feed Strokes Available for M-2512 Independent Reaming Attachment
Speed & Feed Chart
Capacity Chart
Cam Diagrams
Repair Parts Section:
Plates 2 through Plate 30
Functional Illustrated Component Identification DiagramsThis Manual Has 47 Printed Pages.

Warner & Swasey 4A SaddleTurret Lathe, M-3350 & M-3580, Service and Parts Manual

http://industrialmanuals.com/warner-swasey-saddleturret-lathe-m3350-m3580-service-parts-manual-p-1829.php 

Warner & Swasey 4A Universal Saddle type Turret Lathe, M-3350 & M-3580 Starting Lot 1, Service and Parts List Manual Year (1958)        

This Manual Covers Models:
4A
Saddle Type
M-3350
M-3380
Start Lot 1

This Manual Includes:Introductions
Machine Data
Foundation
Moving the Turret Lathe
Cleaning
Electrical Connections
Lubrication
Alignment
Maintenance
Headstock Operation
Description and Operation of the Major Turret Lathe Elements
Repair Parts Section:
Functional Illustrated Component Identification Diagrams
Plates 1 through Plate 54
Parts List for Air Control Valve Assembly
Parts List for RFL Unit Model 400
Machine Tool Standard Data Sheets
Speed and Feed Chart
1966 Automatic Hydraulic Pre-Selector Head Plan & End Views Showing Covers
This Manual Has 143 Printed Pages.
Year 1958

Warner & Swasey 3AC Single Spindle Chucking Automatic, M-3250, Operations Manual

http://industrialmanuals.com/warner-swasey-single-spindle-chucking-automatic-m3250-operations-manual-p-1823.php 

Warner & Swasey 3AC Single Spindle Chucking Automatic, M-3250, Operating Instructions Manual Year (1962) 

This Manual Covers Models:
3AC

This Manual Includes:Machine Tool Standard Data Sheet
Operating Instructions
Preventive Maintenance Check List
Installation Lubrication, Coolant, Air Control
Electrical Controls
Starting and Stopping the 3AC Machine
Emergency Tool Withdrawal
Selection of Speeds and Feeds
Hand Operation Control
Automatic Operation Controls
Tapping and Threading Operations
Tooling and Setup
Standard Tool and Machine Data
Metal Removal Capacity Chart
Surface Speed Chart
Cutting Time Chart
Thread Cutting Time Chart

This Manual Has 58 Printed Pages.
Year 1962

Warner & Swasey 3AC Single Chucking Lathe M-3250, Service and Part Manual

http://industrialmanuals.com/warner-swasey-single-chucking-lathe-m3250-service-part-manual-p-1822.php 

Warner & Swasey 3AC Single Spindle Chucking Automatic M-3250, Start Lot 1, Service and Parts Manual        

This Manual Covers Models:
3AC
M-3250
Starting Lot 1

This Manual Includes:Machine Tool Standard Data Sheet
3AC Lubrication System
Lubrications and Specifications
Timing Instructions
Cross Slide Drive Unit Assembly Instructions (Lot 1-14 units with early cross slide cams) and without CS Cams
Timing Instructions Starting Lot 15
Electrical Parts Bulletin D-220262 M-3250 Start Lot 1 through Lot 14
S-P Installation Instructions and Parts Lists RM and RM4 High-Speed Rotating Air Cylinders
Parts for Self-Centering Chucks and Compensating Chucks
Instructions for Ordering Repair Parts Plate 2 through Plate7
Instructions for Ordering Repair Parts Plate 13 through Plate 20
Index Brake Service Manual Series 4 Polyphase A.C. Brake
Dings Brakes: Maintenance and Operating Instructions
Warner Electric Brake and Clutch Main Parts of the Warner Electric Brake
Trouble Shooting
Maintenance
Rapid Traverse Brake #825 Brake
OAC Index & Rapid Traverse Brake, 1AC Index Brake Repair Parts
Autogap Installation Instructions

This Manual Has 88 Printed Pages.

Warner & Swasey 3A M-1950 Lots 89 to 134 incl., Lathe Service and Parts Manual

http://industrialmanuals.com/warner-swasey-m1950-lots-incl-lathe-service-instruct-parts-p-5716.php 

Warner Swasey 3A M-1950 Lots 89 to 134 Incl., Turret Lathe Service Instruction and Parts Manual

This Manual Covers Models: 
3-A
M-1950
Lots 89 to 134
A Type

This Manual Includes:
Service
Instructions
Adjustments
Lubrications
Parts Lists
Functionally illustrated Drawings showing component Identification

This Manual Has 117 Printed Pages.

Warner & Swasey 2AB single spindle Bar Automatic Operating Manual Year (1961)

http://industrialmanuals.com/warner-swasey-single-spindle-automatic-operating-manual-year-1961-p-1846.php 

Warner & Swasey 2AB Single Spindle Bar Automatic Operating Instructions Manual Year (1961)         

This Manual Covers Models:
2AB
Single Spindle

This Manual Includes:Setting Up
Operation
Tool Clearances
Standard Tool and Attachments
Preventive Maintenance

Data Sheet
Preventive Maintenance Check List
Installation
Lubrication and Coolant
Electrical Controls
Starting and Stopping the 2AB Machine
Selection of Speeds and Feeds
Hand Operation Control
Automatic Operation Control
Tapping and Threading Operations
Tooling and Setup
Standard Tool and Machine Data
Surface Speed Chart
Cutting Time Chart
Thread Cutting Time Chart
This Manual Has 70 Printed Pages.
Year 1961

Warner & Swasey 2AB Bar Automatic M-3380, Service Manual

http://industrialmanuals.com/warner-swasey-automatic-m3380-service-manual-p-1817.php 

Warner & Swasey 2AB Bar Automatic M-3380, Start Lot 1, Service Manual       

This Manual Covers Models:
2AB
M-3380
Starting Lot 1

This Manual Includes:Preventive Maintenance
Turning Fact Sheet
Machine Tool Standard Data Sheet, C244192, C-279182, C-279183
Schematic Diagram of Hydraulic Clutches-Speed and Feed Dogs
Standard Gear Train & Hydraulic Diagram Start Lot 22
Schematic Diagram of Collet Chuck and Bar Feed Hydraulic Circuits
Instructions for Assembling No. 2AB M-3398 Bar Feed
Hydraulic Bar Feed
Instructions for Assembling 2AB Bar Feed M-3398 Start M-3380 Lot 45
No. 2AB (3in.) Bar Feed with Hyd. Operating Mechanism Start Lot 45, Hyd. Piping Hookup
Bar Feed & Collet Chuck Hyd. Piping diagram for Machine without Die Head Re-setter
Instructions on How To Change Collets, Draw Tube, Feed Finger , Tube & Filler Tube on M-3380 2AB Machine, D-244375
Dis-Assembly Instructions M-3398 2AB
2AB Timing Instructions (18 pages)
Lubrication and Specifications
Service Instructions for Bijur Automatic Lubrication System Type G
Maintenance and Service Instructions Fawick Magnetic Clutches Bulletin No. M-103-C
Instructions for Mounting and Using Manchester T-942 Holders
Repair Parts List for Stearns 87,000 Series Electric Disc Brakes
Dyna TorQ Brakes Model 308 Instruction Manual
Index Brake-Service Manual Series 4 Polyphase A.C. Brake
Dings Brakes Inc. Maintenance and Operating Instructions
Maintenance and Installation Instructions for Stearns Electric Disc Brakes
Threading Change Gear Charts
S-P Installation and Service Instructions for Self-Centering and Compensating Power Chucks

This Manual Has 129 Printed Pages.

Sharks are incredible Living Machines

Epaulette sharks use their fins like legs to walk along the ocean floor, instead of swimming.
Epaulette sharks, names for the prominent black spot behind their pectoral fins, are unique in the shark world. They make their homes among shallow coral reefs and tidal pools around Australia, in water that is barely deep enough to cover their bodies. Although epaulette sharks can swim they often prefer to walk along the seabed, looking for food, moving along by wriggling their bodies and pushing with their fins.
Incredibly Awesome. Like tadpoles. 

Warner & Swasey 2A, 3A and 4A, Turret Lathe Operation Parts & Electrical Manual

http://industrialmanuals.com/warner-swasey-turret-lathe-operation-parts-electrical-manual-p-5255.php 

Warner & Swasey 2A 3A 4A, Turret Lathe Operations and Parts Manual Year (1965)
 
This Manual Covers Models: 
2A
3A
4A
M-3470 Start Lot 4
M-3500 Start Lot 6
M-3550 Start Lot 2
M-3580 Start Lot 2

This Manual Includes:
Operating Instructions

Description and Operations of the Hydraulic Headstock
Hydraulic Circuit Details
Forward and Reverse Circuits
Brake Circuit
Shifting Circuit
Spindle Inching Circuit
Composite Diagram of Hydraulic Circuits

Installation
Introduction
Machine Data
Foundation
Moving the Turret Lathe
Cleaning
Electrical Connections
Lubrication

Major Turret Lathe Elements
Nomenclature of Major Turret Lathe Elements
One-piece Head and Bed
Headstock
Head End Gear Box
Square Turret
Cross Slide and Carriage Unit
Hexagon Turret and Saddle Unit
Repair Parts Section
Functionally illustrated Drawings showing Component Identification
Safety Manual for Turret Lathe Operators

This Manual Has 187 Printed Pages.
Year 1965

Warner & Swasey 2A Turret Lathe, M-510 Lot 12, Service and Parts Manual 1952

http://industrialmanuals.com/warner-swasey-turret-lathe-m510-service-parts-manual-1952-p-1830.php 

Warner & Swasey 2A Heavy Duty Universal Turret Lathe , M-510 Lot 12, Service and Parts Manual Year (1952)       

This Manual Covers Models:
2-A
M-510
Lot 12

This Manual Includes:Service Manual
Installation
Maintenance
Repair Parts
Erecting
Alignment
Feed Train
Pre-selector
Headstock
Cross Slide Carriage unit
Taper Attachment
Power Feed Compound Cross Slide
Hexagon Turret Saddle Unit
Bar Chucks and Bar Feeds
Cross Sliding Hexagon Turret
Lead Screw for Thread Cutting
Speed and Feed Chart
Repair Parts Section:
Plate 1 through Plate 43
Functional Illustrated Component Identification Diagrams
This Manual Has 97 Printed Pages.
Year 1952

Warner & Swasey 2-SC, M5060 M5090, Lathe Service and Parts Manual 1978

http://industrialmanuals.com/warner-swasey-m5060-m5090-lathe-service-parts-manual-1978-p-5266.php

Warner Swasey 2-SC, M5060 & M5090 Lot 750, Lathe Service and Parts Manual


This Manual Covers Models: 
2-SC
M5060
M5090
1-SC/10
1-SC12
2-SC/12
2-SC15
2-SC/18

This Manual Includes:
Introduction
Machine Nomenclature
Description and Operations
Installation
Headstock Operation
Lubrication Schedule
Cross Slide Way Lubrication Unit
Preventive Maintenance
Adjustments

This Manual Has 151 Printed Pages.
Years 1978