Ferguson Model 19-150, Air Hydraulic Drill Unit, Install & Maintenance Manual

http://www.industrialmanuals.com/ferguson-model-19150-hydraulic-drill-unit-install-maintenance-manual-p-3213.php 

 

 

 Ferguson Model 19-150, Air Hydraulic Drill Unit, Installation and Maintenance Manual

This Manual Covers Models: 
19-150

This Manual Includes:
Installation Instructions
Power Regulation
Maintenance Instructions
Service Chart
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has 14 Printed Pages.

Fenn Service No 2, 4 Rotary Stationary Die Swaging Machine Manual

http://www.industrialmanuals.com/fenn-service-rotary-stationary-swaging-machine-manual-p-845.php 

 

 

 Fenn Service No 2, 4 Rotary Stationary Die Swaging Machine Manual

This Manual Covers Models:No 2, 4
# 2, 4

This Manual Includes:How to Operate
How to Install
Machines with Fixed Stroke
Machines with Hammer Adjusting Screws
Dies, Mandrels, Manual Feeding, Rack and Pinion Feeds
Hydraulic Feeds
Much More!!!
This Manual Has 12 Printed Pages.

Fellows Z Type Horizontal Gear Shaper Instruction Manual Year (1942)

http://www.industrialmanuals.com/fellows-type-horizontal-gear-shaper-instruction-manual-year-1942-p-1115.php 

 

 

Fellows Instruction Type Z Horizontal Gear Shaper Manual Year (1942)  

This Manual Covers Models:
10 x 6
HZ

This Manual Includes:
Introduction
Installation:
Assembly
Lubrication
Electrical Connections
Cutting Oils
Location of Controls
Electrical Push Button Panel
Initial Set-UP Adjustment Procedures
Installation Guide to Starting of the Machine
Summary of Set Up Procedures
Operating Procedures
Operational Procedure
Cleaning the Machine
Maintenance with Recommended Mechanical and Electrical Repair Parts
Much More!!!
This Manual Has 16 Printed Pages. Year 1942

Fellows Type Z, Horizontal Gear Shaper Parts Lists Manual Year (1957)

http://www.industrialmanuals.com/fellows-type-horizontal-gear-shaper-parts-lists-manual-year-1957-p-1116.php 

 

 

Fellows Parts List Horizontal Type Z Gear Shaper Manual Year (1957)  

This Manual Covers Models:
Type Z

This Manual Includes:
Parts Lists
Castings
Steel and Other Parts
Screws
Pins
Extra Parts for Work-Spindle
Quick-Return Mechanism
12 Figurative Pictured Diagrams
Much More!!!

This Manual Has  20 Printed Pages. Year 1957

Fellows Type LS Gear Lapping Machine, Parts Lists Manual

http://www.industrialmanuals.com/fellows-type-gear-lapping-machine-parts-lists-manual-p-1117.php 

 

 

Fellows Parts Lists Type LS Gear Lapping Machine Manual  

This Manual Covers Models:
Type LS
7L
7LS
8LS
10LS
13LS

This Manual Includes:
Parts Lists
Castings
Steel and Other Parts
Screws
Pins
Extra Parts for Nos. 8LS and 13LS with Detachable Lap Head
for Lapping Gear With Internal Gear-Type Laps
Extra Parts for Work Support
12 Figurative Photo Diagrams
Much More!!!
This Manual Has  20 Printed Pages.

Fellows Type 6A Gear Shapers Machine Parts Lists Manual Year (1969)

http://www.industrialmanuals.com/fellows-type-gear-shapers-machine-parts-lists-manual-year-1969-p-1130.php 

 

 

Fellows Parts List 6A-Type Gear Shapers Machine Manual Year (1969)  

This Manual Covers Models:
6A-Type
Type 6A

This Manual Includes:Parts List
Introduction
Details of Machine
Plate Numbers 1-23 (Figures, Diagrams and Photographs)
Extra Parts
This Manual Has  28 Printed Pages. Revision of 1957 Printed 1969

Fellows Type 6A Gear Shapers Machine Parts Lists Manual Year (1952)

http://www.industrialmanuals.com/fellows-type-gear-shapers-machine-parts-lists-manual-year-1952-p-1129.php 

 

 

Fellows Parts List 6A-Type Gear Shapers Machine Manual Year (1952)  

This Manual Covers Models:
6A-Type
Type 6A

This Manual Includes:
Introduction
Details of Machine
Plate Numbers 1-22 (Figures, Diagrams and Photographs
Extra Parts
Much More!!!
This Manual Has  26 Printed Pages. Year 1952

Fellows Type 6A Gear Shaper Machine Service Repair Manual Year (1955)

http://www.industrialmanuals.com/fellows-type-gear-shaper-machine-service-repair-manual-year-1955-p-1132.php 

 

 

Fellows Service Repair Type 6A Gear Shapers Machine Manual Year (1955)  

This Manual Covers Models:
6A-Type
Type 6A

This Manual Includes:
Adjusting Upper Worm and Worm-Wheel for Correct Backlash
Adjusting Lower Worm and Worm-Wheel for Correct Backlash
Centralizing Cutter and Work Spindles
Aligning Cutter and Work Spindles
Removing Cutter Slide Gear on Machine Nos 65A3 and 62A3
Replacing Cutter Spindle Bushing and Testing alignment of
Cutter Spindle on Machine Nos. 65A3, 645A3, 62A3, 624A3
Adjusting the Reliving Mechanism
Adjusting Apron Locking Mechanism
Replacing Apron Pivots
Checking Angle Block Setting
Changing Angle Blocks To Change Angle or Direction of Apron Relief
Removing Work Spindle and Lower Index-Wheel from Machines
Re-assembling Work Spindle and Lower Index-wheel on Machines
Removing Work Spindle and Lower Index-wheel on Machines
Removing and Replacing Apron Quill
Adjustment of Friction Clutch on Main Drive Shaft
Repairing and Checking Feed and Timing Mechanism
Much More!!!
This Manual Has  21 Printed Pages.  Year 1955

Fellows Type 6 Gear Shaper Machine Service Repair Manual Year (1943)

http://www.industrialmanuals.com/fellows-type-gear-shaper-machine-service-repair-manual-year-1943-p-1131.php 

 

 

Fellows Service Repair Book Type 6 Gear Shaper Machine Manual Year (1943)  

This Manual Covers Models:
6-Type
Type 6

This Manual Includes:
Complete Details Regarding Minor Adjustments to Compensate for Ordinary Wear
of The Working Members Are Given In our Operators Handbook Chapter IV,
and is Listed Below:
Adjusting :
Worms to Work and Cutter Index-wheels
Taper Gib in the Cutter Guide on the Spur Gear Shaper
Helical Guides
Lower Cutter-Spindle Bearing on the Spur Gear Shaper
Taper Gib on the Ram
Saddle Gib on Cross-rail
Lead-Screw nut
Dial nut
Tension on Apron Lever
Clamping Nuts on the Rack Screw
Rack Clamp Binder
Location Block for Apron
Work-Spindle
Ring Gib in Upper Index-wheel
Machining Upper Half of Cabinet, Apron and Apron Lever
Instructions
Much More!!!
This Manual Has  13 Printed Pages.  Year 1943

Fellows Type 6 Gear Shaper Machine Parts Lists Manual Year (1957)

http://www.industrialmanuals.com/fellows-type-gear-shaper-machine-parts-lists-manual-year-1957-p-1133.php 

 

 

Fellows Parts Lists Type 6 Gear Shaper Machine Manual Year (1957)  

This Manual Covers Models:
6-Type
Type 6

This Manual Includes:
Description of 6-Type Fellows Fear Shapers
Parts List for Standard 61-Type Gear Shaper
Front View From Left Hand End
View From Right Hand End
Right Hand End View
Close View of Feed And Reciprocating Mechanism
Close View of Apron Seat and Locating Block
Apron Lever and Cutter Slide Assemblies
Saddle and Upper Worm Box Assembly
Feed Bracket Assembly
Pump Assembly
Parts List for 64 Type Gear Shapers
Front View of 64 type
Close View Apron Set and Locating Block of 64 Type
Parts List for 615 and 645 Type
Parts List for 612 Type and 624 Type
Parts List for Hollow Cutter Spindle (Special)
Parts List for 6 Inch Stroke
Parts List for Fine Depth Feed (Special) 6 type
Parts List for Center locating Support
Parts List for V Belt Drive
Parts List for Counter Shaft
List of Standard Wrenches and Tools
Explanation of Reference Letters
Much More!!!
This Manual Has  26 Printed Pages.  Year 1957

Fellows The Involute Gear simply explained Manual Year (1941)

http://www.industrialmanuals.com/fellows-involute-gear-simply-explained-manual-year-1941-p-1120.php 

 

 

Fellows The Involute Gear Simply Explained Manual Year (1941)  

This Manual Covers Models:Involute Gear
Reference Information
This Manual Includes:
A Direct Concise Treatise which Makes Plain
The Action of Involute Gearing and yet Avoids the Use of Higher Mathematics
Functions of Gearing , and Application of the Involute Curve
Gear-Tooth Shapes and Advantages of Involute Gears
Generating Involute Gear Teeth
Definitions and Proportions of Gear Tooth Elements
Rules and Formulas
Chordal Tooth Thickness and Chordal Addendum
Much More!!!
This Manual Has  68 Printed Pages. Year 1941

Fellows The Involute Curve Involute Gearing Manual Year (1950)

http://www.industrialmanuals.com/fellows-involute-curve-involute-gearing-manual-year-1950-p-1121.php 

 

 

Fellows The Involute Curve Involute Gearing Manual Year (1950)   

This Manual Covers Models:
Involute Gear
Involute Curve
Reference Information
This Manual Includes:
A Complet Treatise Covering the Application of The Involute Curve to Gear Teeth:
Design, Cutting and Checking of Involute Gears
Definitions of Gear-Tooth Elements, etc.
Sixth Completely Revised Edition
Introcution
Function of Gearing and Applications of The Involute To Gear Teeth
Design of Involute Gear Teeth
Generating and Checking Involute Gear Teeth
Definitions of Gear Elements
Rules and Formulas for Caluculating Dimensions of Diametral Pitch Gears
Full Length Tooth Generated Gears
Much More!!!
This Manual Has  87 Printed Pages.  Year 1950

Fellows The Internal Gear Design And Application Manual Year (1943)

http://www.industrialmanuals.com/fellows-internal-gear-design-application-manual-year-1943-p-740.php 

 

 

Fellows The Internal Gear Design and Application Manual Year (1943) This Manual Covers Models:

The Internal Gear Design & Application

This Manual Includes:

A Simple but Practical Analysis of the comparative tooth action of internal and external gear teeth. Together with the directions for cutting, data on designing, internal gears, clutches and splines and methods for calculating gear tooth strength.

This Manual Has 84 Pages.
Fifth Printing
Third Revised Edition
Year 1943

Fellows Stub Tooth Gear Operators Handbook Manual Year (1919)

http://www.industrialmanuals.com/fellows-stub-tooth-gear-operators-handbook-manual-year-1919-p-1123.php 

 

 

Fellows Operators Handbook Stub Tooth Gear Manual Year (1919)  

This Manual Covers Models:
Stub Tooth Gears

This Manual Includes:
This Manual is a Treatise which Explains in Simple Terms the Advantages of
the Combination of a Short gear Tooth with An Increased Angle of Obliquity
Fifth Edition, Revised and Enlarged
A Typical Three Speed Forward and Reverse Type of Automobile Transmission
One Piece Countershaft Gear Having 20-Degree Stub Teeth
Development of Gear Teeth and Gear Tooth Proportions
Graphical Analysis of Gear Tooth Wear and Durability
Comparative Strength of 14 ½-Degree and 20 Degree Stub Gear Teeth
Summary of Advantages of the Stub Tooth Gear
Graphical Method of Generating and Involute Gear Tooth
Much More!!!
This Manual Has  54 Printed Pages. Year 1919

Fellows Reishauer No. 12, Gear Grinder, Parts Lists Manual 1967

http://www.industrialmanuals.com/fellows-reishauer-gear-grinder-parts-lists-manual-1967-p-3407.php 

 

 

Fellows Reishauer No. 12, Gear Grinder, Parts List Manual Year (1967)

This Manual Covers Models:  
No. 12
This Manual Includes:   
Picture # 3 in our photo Gallery shows the Plate Listings
Reishauer & Fellows
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Complete Has 67 Printed Pages.
Year May 1967

Fellows Pfauter P-400, Hobbing Machine, Instructions Manual 1964

http://www.industrialmanuals.com/fellows-pfauter-p400-hobbing-machine-instructions-manual-1964-p-3403.php 

 

 

Fellows PFauter P-400, Hobbing Machine, Instructions Manual Year (1964)

This Manual Covers Models:  
P-400

This Manual Includes:   
Section I:
Main Parts and Operating Elements
P-400 Work Limits
Limit Sheet
Instructions for Oiling

Section II:
Minimum Numbers of Teeth and Maximum Hob Speeds
Determining Cutting Speed
Types of Feed
Methods of Hobbing
Set-Up Diagram
Prior Engagement of Axial or Tangential Feed
Program Selector Switch
Functions of Differential

Section III:
General Information on Change Gears
P 400 Change Gear Limitations
Index Change Gear Tables
Prime Number Spur Gear Tables

Section IV:
Hob Shifting Methods and Applications
Diagonal Hobbing
Setting-Up for Diagonal Hobbing
Set-Up Diagram for Diagonal Hobbing
Differential Change Gear Set-Up Diagram
Diagonal Change Gear constants
Step by step Hob Shifting (Manual and Automatic)
Step by step Diagonal Hobbing

Section V:
description of Crowning Unit
Set-Up Procedure
Data for Rigid Cam-Design and Calculation
Crowning Cam Formulas

Supplement for Converting from English to Metric System
Section 2 MS1
Section 2 MS2
Section 2 MS3
Section 2 MS4
Section 3 MS5
Section 4 MS6
Section 4 MS7
Section 3 MS8
This Manual Complete Has 79 Printed Pages.
Year 1964

Fellows No. 8AGS, Gear Shaper, Instructions Manual Year (1964)

http://www.industrialmanuals.com/fellows-8ags-gear-shaper-instructions-manual-year-1964-p-3401.php 

 

 

Fellows No. 8AGS, Gear Shaper, Instructions Manual Year (1964)

This Manual Covers Models:  
No. 8AGS

This Manual Includes:   
Introduction
Operations
Maintenance
General Information

This Manual Complete Has 31 Printed Pages.
Year 1964

Fellows No. 8 Microdex, Gear Shaper, Instructions Manual Year (1968)

http://www.industrialmanuals.com/fellows-microdex-gear-shaper-instructions-manual-year-1968-p-3400.php 

 

 

 

Fellows No. 8 Microdex, Gear Shaper, Instructions Manual Year (1968)

This Manual Covers Models:  
No. 8
Microdex
This Manual Includes:   
Specifications
Introduction
General Description
Operator’s Controls
Operational Set-Up Procedures
Maintenance
Gage Block Tabulations

This Manual Complete Has 20 Printed Pages.
Year 1968

Fellows No. 7 and 7A Type, gear Shaper Manual Year (1964)

http://www.industrialmanuals.com/fellows-type-gear-shaper-manual-year-1964-p-3411.php

 

 

Fellows No. 7 and 7A Type, Gear Shaper Manual Year (1964)

This Manual Covers Models:  
No. 7
No. 7A
This Manual Includes:   
Describing a Line of Gear Cutting Machines
Capable of Being Operated at High-Speed
and Particularly Adapted to the Cutting of Accurate Work on a High-Production Basis
Eleventh Edition Revised 1964 Printed 2000 (Original 1929 Revision)
High-Speed Gear Shapers
Operating the 7 and 7A Type gear Shapers
Care and Maintenance
General Information and tAbles
This manual has All Models of the Fellows Gear Shaper CO. Accept 7125-type
This Manual Complete Has 73 Printed Pages.
Year 1964

Fellows No. 6 Gear Shapers Information Possibilities Manual Year (1925)

http://www.industrialmanuals.com/fellows-gear-shapers-information-possibilities-manual-year-1925-p-698.php 

 

 

Fellows No. 6 Type Gear Shapers Information of Possibilities Manual Year (1925) 

This Manual Covers Models:No. 6
Type 6

This Manual Includes:

A concise description of the possibilities of the gear shaper cutter, and the different universal types of gear shapers used for generating gear teeth.

This Manual Has 33 Pages.
Second Edition
Year 1925

Fellows No. 4S and 6S, Helical Cutter Sharpening Machines, Parts Manual 1962

http://www.industrialmanuals.com/fellows-helical-cutter-sharpening-machines-parts-manual-1962-p-3409.php 

 

 

Fellows No. 4S and 6S, Helical Cutter Sharpening Machines, Parts List Manual Year (1962)

This Manual Covers Models:  
No. 4S
No. 6S
This Manual Includes:   
Picture in our photo Gallery shows the Plate Listings and Descriptions
1962 Revision
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Complete Has 27 Printed Pages.
Year 1962

Fellows No. 4GS, Gear Shaper, Parts List Manual Year (1962)

http://www.industrialmanuals.com/fellows-gear-shaper-parts-list-manual-year-1962-p-3408.php 

 

 

Fellows No. 4GS, Gear Shaper, Parts List Manual Year (1962)

This Manual Covers Models: 
No. 4GS
This Manual Includes:   
Picture # 3 in our photo Gallery shows the Plate Listings
1962 Revision
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Complete Has 48 Printed Pages.
Year Printed May 1976

Fellows No. 4AGS, Gear Shaper, Operations Manual Year (1964)

http://www.industrialmanuals.com/fellows-4ags-gear-shaper-operations-manual-year-1964-p-3406.php 

 

 

Fellows No. 4AGS, Gear Shaper, Operations Manual Year (1964)

This Manual Covers Models: 
No. 4AGS

This Manual Includes:   
introduction to the Shaper
Operating the 4AGS Gear Shaper
Care and Maintenance
Semi-Automatic and Full-Automatic Operation and Special Attachments
General Information and Tables
This Manual Complete Has 71 Printed Pages.
Year 1964

Fellows No. 4, Fini-Shear, Parts Lists Manual Year (1965)

http://www.industrialmanuals.com/fellows-finishear-parts-lists-manual-year-1965-p-3415.php

 

 

Fellows No. 4 Fini-Shear, Gear Shaper, Parts List Manual Year (1965)

This Manual Covers Models:  
No. 4
Fini Shear

This Manual Includes:   
Please Visit our Photo Gallery for more Content
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Complete Has 47 Printed Pages.
Year 1965

Fellows No. 4 Fine Pitch Red Liner Machine Parts Lists Manual Year (1957)

http://www.industrialmanuals.com/fellows-fine-pitch-liner-machine-parts-lists-manual-year-1957-p-1128.php 

 

 

Fellows Parts List No 4 Fine Pitch Red Liner Machine Manual Year (1957)  

This Manual Covers Models:
No. 4
Fine Pitch

This Manual Includes:
Parts Lists
No. 4 Fine-Pitch Red Liner
Recommended List of Spare Parts for customer to Stock
Additional Spare Parts Kept in F.G.S. Stock for Quick Delivery
Switch Plate and Handwheel Mechanism
Measuring Head and Work Centers
Motor Drive Mechanism
Electrical Recorder and Paper Drive Mechanism
Cabinet
Universal Work Holding Fixture
Much More!!!

This Manual Has  13 Printed Pages. Year 1957

Fellows No. 4 Fine Pitch Red Liner Machine Operators Instruction Manual Yr. 1957

http://www.industrialmanuals.com/fellows-fine-pitch-liner-machine-operators-instruction-manual-1957-p-1127.php 

 

 

Fellows Operators Instruction No 4 Fine Pitch Red Liner Machine Manual Year (1957)  

This Manual Covers Models:
No. 4
Fine Pitch

This Manual Includes:
Introduction
Assembly of Instrument
Operation of Instrument
Capacity Sheet
Speed and Feed Diagram
Capacity Sheet for turret Fixture
Much More!!!
This Manual Has  11 Printed Pages. Year Revised November 1957 Printed 1965