skip to main |
skip to sidebar
http://www.industrialmanuals.com/norton-lcv4-plain-cylindrical-chucking-grinder-operation-manual-p-1576.php
Norton LCV-4, 14" x 18" Plain Cylindrical Chucking Grinder Set-up and Operation Manual
This Manual Covers Models:
LCV-4
14" x 18"
This Manual Includes:Initial Setting Up of Machine
Operating and Adjusting the Machine
Photographs:
View of Machine (Front)
Operator Setting up Wheel Truing Device
Instructions on Mounting the Grinding Wheel
Greasing and Lubrication
Identification of Operating Controls and Machine Components
Operating The Machine
This Manual Has 19 Printed Pages.
http://www.industrialmanuals.com/norton-gould-eberhardt-operators-instruction-gear-hobbing-manual-p-983.php
Norton Gould Eberhardt Operators Instructions 36H Gear Hobbing Manual
This Manual Covers Models:
36H
This Manual Includes:General Instructions
Circulatory Pressure Lubrication
Hob Unit Housing
BiJur Automatic Lubricating System Type M
Electric Control Panel
Change Gears and Hydraulic Work Clamp
Hobbing Speed and Feed
Power Rapid Traverse Stops
Conventional Hobbing Downfeed
Climb Hobbing Upfeed and Hobbing Spur Gears
Operation of Machine
Resetting Device for Re-cutting Gears without Disturbing Work
For Re-Cutting Gears When Work is Disturbed
Tables and Adjustments
Change Gear Arrangements and Indexing Formulas
NOTE: Quality of this manual is a bit light in some places. Overall condition of images is good.
This Manual Has 46 Printed Pages. 5 Diagrams Year 1953
http://www.industrialmanuals.com/norton-gould-eberhardt-hobbing-method-cutting-gear-teeth-manual-p-982.php
Norton Gould Eberhardt Hobbing Method of Cutting Gear Teeth Manual
This Manual Covers Models:
Reference Information
This Manual Includes:Expansion of 1945 Edition
Forming and Generating Method of Cutting Gear Teeth
Angular Setting of the Hob
The Gearing in a Hobbing Machine
Hobbing Spur Gears
Hobbing Helical Gears Differential and Non Differential Method
Multiple Thread Hobs and Setting Gages
Speed and Feeds for Spur Gears
Climb Versus Conventional Hobbing
Hobbing Wormgears Infeed and Tangential
Other Methods
Much More!!!
This Manual Has 8 Printed Pages. Year 1952
http://www.industrialmanuals.com/norton-four-lapping-machine-operator-instruct-parts-adapters-manual-1933-p-4217.php
Norton Four Way, Lapping Machine, Operators Instructions Parts and Adapters Manual Year (1933)
This Manual Covers Models:
Four-Way
This Manual Includes:
Introduction
Setting up the Machine
Slurry Mixtures
Operating the Slurry Dispenser
Steps in Operating the Machine
Establishing Stock Removal Rates
General Comments:
Dial Indicator System
Conditioning the Laps
Maintenance Considerations
Appendix:
Theory of Operation
Parts List
List of Adapters
Brochure with Features, Equipment and Specifications
Please View Photo Gallery for more Content
This Manual Has 20 Printed Pages.
Year 1933
http://www.industrialmanuals.com/norton-autmatic-wheel-guard-truing-device-instructions-parts-manual-1954-p-4228.php
Norton Automatic Wheel Guard Truing Device, Instructions and Parts Manual Year (1954)
This Manual Covers Models:
Truing Device
This Manual Includes:
Operations
Fast Traverse
Fast Reversal
Automatic Down-feed
Adjustments
Vertical Adjustment of Diamond Holder
Position of Slide At Rest
Distance of Fast Traverse
Truing Speed
Distance of Fast Travel at Reversal
Point of Reversal
Amount of Down-Feed
Slide Motion in Vertical and Horizontal Plane
Maintenance and Accuracy
Lubrication
Illustrations:
Isometric Assembly of Wheel Guard Truing Device with Booster Arrangement (SE-343-B)
Identification of Parts (SE-1019-A)
Norton Automatic Wheel Guard Truing Device:
Booster Mechanism Identification of Parts (SE-1020-A)
Placement of Rollers and Bearings
Parts Lists
Functionally illustrated Drawings showing Component Identification
Please View Photo Gallery for more Content
This Manual Has 16 Printed Pages.
Year April 1954
http://www.industrialmanuals.com/norton-surface-grinder-instructions-13521-parts-manual-1960-p-4226.php
Norton 8 “ x 24’ S-3, Surface Grinder, Instructions and 1352-1 Parts Manual Year (1960)
This Manual Covers Models:
8” x 24
S-3
1352-1 Parts
This Manual Includes:
Operating Controls
Uncrating, Lifting and Leveling
Reassembly
Preparing the Machine for Operation
Hose and Electrical Connections
Mounting the Grinding Wheel
Wheel Guard
Lubrication
Hydraulic Oil
Operations
Attachments
Coolant through Grinding Wheel
Wet and Dry Grinding
Construction and Servicing
Parts
Please View Photo Gallery for more Content
This Manual Has 34 Printed Pages.
Year August 1960
http://www.industrialmanuals.com/norton-type-grinder-instructions-16083-parts-manual-1959-p-4230.php
Norton 6” x 18” Type S-3, Hydraulic Surface Grinding Machine, Instructions and 1608-3 Parts Manual Year (1959)
This Manual Covers Models:
6” x 18”
Type S-3
This Manual Includes:
Uncrating and Handlin
Preparing Machine for Operation
Operating S-3
Construction and Servicing
Parts Section
Also Includes:
Floor Plan Drawing
Electrical Diagram
Hydraulic Circuit Diagram
Lubrication Bulletin
Please View Photo Gallery for more Content
This Manual Has 131 Printed Pages.
Year 1959
http://www.industrialmanuals.com/norton-lctu-cylindrical-grinders-instruction-parts-manual-year-1953-p-1534.php
Norton 6" Type CTU, 10" LCTU Cylindrical Grinders Instruction and Parts Manual Year (1953)
This Manual Covers Models:
6" Type CTU
10" Type LCTU
This Manual Includes:Plain and Semiautomatic
No. 429-2
Instruction and Parts
Functional Illustrated Parts Drawings & #'s
Section I. Initial Set Up and Adjustment
Section II. Lubrication
Section III. Unit Constructions
Section IV. Norton 6" Type CTU Plain Machine
Section V. Norton 6" Type CTU Semiautomatic Machine
Section VI. Grinding Principles and General Procedure
Section VII. Wheel Head Mounted Automatic Truing Device
Instruction Sections
Parts SectionThis Manual Has 75 Printed Pages.
Year 1953
http://www.industrialmanuals.com/norton-angular-grinder-instructions-6166-parts-manual-p-4223.php
Norton 6 x 18 & 10 x 18L, 30L Angular grinder, Instructions and 616-6 Parts Manual Year (1965)
This Manual Covers Models:
6 x 18”
10 x 18” L
6 x 30”
10 x 30” L
This Manual Includes:
Erecting
Machine Units
Operations and Adjustment Details
Wheelhead Mounted Automatic Truing Device
Illustrations Totaling (14)
Please View Photo Gallery for more Content
This Manual Has 46 Printed Pages.
Year January 1965
http://www.industrialmanuals.com/norton-cylindrical-grinder-prior-1939-operations-service-manual-p-4202.php
Norton 6” Type C, Cylindrical Grinder, Construct Operations and Service Manual
This Manual Covers Models:
6”
Type C
PRIOR TO October 1939
This Manual Includes:
Introduction
Instructions Common to all Machines
Units for All Models
Units for Hand Traverse Machines
Units for Hydraulic Wheel and Table Traverse Machines
Semiautomatic Machines
Grinding Principles and General Procedure
Grinding Compounds
Work, Wheel and Traverse Speeds
Vibration
Information
List of Illustrations Totaling (18)
Power Table Traverse Machine
Diagram of Dead Center Headstock
Section through Wheel Spindle
Feedscrew End Thrust Adjustment
Diagram of Two-Speed Apron
Diagram of Hydraulic System
Section through Table Control Valve
Section through Wheel Feed Mechanism
Section through Continuous Feed Mechanism
Semi-Automatic Machine - Front
Semi Automatic Adjustments
Diagram Showing Semi Automatic Operation
Diagram Of Headstock Operating Cylinder
diagram of Footstock Operating Valve
Wiring Diagram for Semi Automatic Machines
Electric Timer for Semi Automatic Machines
Semi Automatic Machine Rear
This Manual Has 45 Printed Pages.
Year Prior to October 1939
http://www.industrialmanuals.com/norton-type-cylindrical-grinding-machine-wiring-schematic-year-1951-p-1578.php
Norton 6 & 10 Type CTU Cylindrical Grinding Machine Wiring Schematic Year (1951)
This Manual Covers Models:
6"
10"
Type CTU
This Manual Includes:6 & 10 Type CTU Cyl. GR. Machine Semi-Automatic Wiring Diagram
Nomenclature:
MW,MP,MC,MH- Line Contactors
OLW,OLP,OLC,OLH- Temperature Overload Relays
CRI- Control Relay
TCH- Clutch in Microflex Timer
MT- Motor in Microfles Timer
LCI- Holding Interlock in Microflex Timer
CCI, RCI- Contacts for External Circuits in Microflex Timer
1AH- Combination Accelerating Contractor and Full Field Relay
LSI- N.O.
SOL#1
Square “O" Controls 04-16205 This Manual Has 1 Printed Pages.
Year 1951
http://www.industrialmanuals.com/norton-type-cylindrical-grinder-parts-list-manual-year-1954-p-1588.php
Norton 4" Type C, Cylindrical Grinder Parts List Manual Year (1954)
This Manual Covers Models:
4"
Type C
This Manual Includes:Parts Catalog No. 1446-1
Identification of Controls – 4" Type C Grinder (S.E. 385-C)
Drawing showing Base Mechanisms (S.E. 483-A)
Headstock, Dead Center and Live Spindle (S.E. 463-a)
Footstock (S.E.473-A)
Grinding Wheel Unit (S.E. 365-a)
Spindle Reciprocation and Shoulder Grinding (S.E. 469-A)
Section through Feed Screw (S.E. 478-A)
Hydraulic Wheel Head Traverse (S.E. 475-A)
Rapid Wheel Head Traverse Valve (S.E. 481-A)
Two Speed Hand Table Drive Apron (S.E. 461-A)
Wheel Feed Mechanism (S.E. 480-A)
Power Wheel Feed (S.E. 471-A)
Table Control Cylinder and Valve (S.E. 467-A)
Hydraulic Piping Diagrams (Plain, Semiautomatic_
This Manual Has 19 Printed Pages.
Year 1954
http://www.industrialmanuals.com/norton-type-swing-grinders-instruction-parts-manual-1960-p-1591.php
Norton
14", 16", 18" Type C, Plain & Roll, Hi-Swing Grinders Special
Universal Jet Part Instruction and Parts Lists Manual Year (1960)
This Manual Covers Models:
14"
16"
18"
Type C
Hi-Swing
42" x 72" Jet Parts
This Manual Includes:Manual 1545-9
Does Not include the 42" x 72" swiveling wheel slide feature
Statistics on 14"-16" Type C grinding Machines
Section I: General Erecting Procedure
Section II: Units for All Models
Wheel Unit
Section VII: Grinding Procedure and General Instruction
Wheel Selection
Work Support
Setting up Routine
Grinding Compounds
Work Wheel and Traverse Speeds
VibrationThis Manual Has 68 Printed Pages.
Year 1960
http://www.industrialmanuals.com/norton-type-cylindrical-hiswing-operation-servicing-manual-p-1585.php
Norton 14", 16", Type C, Cylindrical Grinders, HD Hi-Swing Grinders, Construction Operation & Servicing Manual
This Manual Covers Models:
14"
16"
This Manual Includes:Manual No. 1545-4
Statistics on 14"-16"Type C Grinding Machines
Section I:
General Erecting Procedure
Location
Erecting
Section II:
Units for All Models
Tables
Headstocks
Live Spindle Attachments
Footstock
Wheel Unit
Pumps
Feed Screw
Lubrication
Section III:
Units For Hand Traverse Machines
Section IV:
Units for Mechanical Traverse Machines
Section V:
Units for Hydraulic Machines
Section VI:
14"-16"Roll Grinders
General Information
Wheel Unit
Grinding Procedure and General Instruction
Wheel Selection
Work Support
Setting Up Routine
Grinding Compounds
Work Wheel and Traverse Speeds
Vibration
This Manual Has 68 Printed Pages.
http://www.industrialmanuals.com/norton-type-grinders-instructions-20412-parts-manual-1959-p-4206.php
Norton 14” and 18” Type U-4, Universal Grinders Instruction and Parts Manual Year (1959)
This Manual Covers Models:
14”
18”
type u-4
This Manual Includes:
Instructions:
Uncrating, Erecting and Starting Machine
Construction of Machine
Operation
Grinding Principles and General Procedure
Front View of Machine
Operating Controls
Parts Lists
Parts Images
Functionally Illustrated Drawings showing Component Identification
Please View Photo Gallery for more Content
This Manual Has 57 Printed Pages.
Year 1959
http://www.industrialmanuals.com/norton-type-cylindrical-roll-hiswing-grinder-instruct-parts-manual-p-1586.php
Norton 14", 16", Type C Cylindrical , Roll Hi-Swing Grinder Instruction and Parts List Manual
This Manual Covers Models:
14"
16"
This Manual Includes:Manual No. 1545-6
Statistics on 14"-16"Type C Grinding Machines
Section I:
General Erecting Procedure
Location
Erecting
Section II:
Units for All Models
Tables
Headstocks
Live Spindle Attachments
Footstock
Wheel Unit
Pumps
Feed Screw
Lubrication
Section III:
Units For Hand Traverse Machines
Section IV:
Units for Mechanical Traverse Machines
Section V:
Units for Hydraulic Machines
Section VI:
14"-16"Roll Grinders
General Information
Wheel Unit
Grinding Procedure and General Instruction
Wheel Selection
Work Support
Setting Up Routine
Grinding Compounds
Work Wheel and Traverse Speeds
Vibration
List Of Functional Illustrative Diagrams with Component Identification (27)
This Manual Has 68 Printed Pages.
http://www.industrialmanuals.com/norton-type-hiswing-parts-instruction-manual-p-1584.php
Norton 14", 16", 18" Type C,
Cylindrical Grinders Plain and Roll, HD Hi-Swing Grinders, Special
Universal Jet Part Grinders Instruction and Parts Manual
This Manual Covers Models:
14"
16"
18"
This Manual Includes:Instruction and Parts Manual No. 1545-A
Functional Illustrative Diagrams with Component Identification
Front View of Machine
Section through Headstock (Dead Center)
Section through Live Spindle Headstock
Two Speed Hand Table Traverse Aprons
Live Spindle Plain Bearing Work head
Footstock Drawing
Wheel Slide Unit
Section through Machine at Feed Screw
Controls of 14 or 16" Type C Mechanical Table Traverse Machine
Aprons for Mechanical Traverse Machines
Wheel Feed Arrangements
Rear View of Machine
Table Reverse Lever and Valve
Regular Intermittent Picker Feed for Hydraulic Traverse Machines
Continuous Power Cross Feed ( Optional Equipment)
Dwell Control
Power Wheel Head Traverse (Hydraulic)
16 x 96" Type C roll grinder with Swivel Table
Section through Wheel Spindle on 14-16" Type C Roll grinders
Section through Roll Forming Mechanism CompleteThis Manual Has 22 Printed Pages.
http://www.industrialmanuals.com/norton-grinders-instructions-15457-parts-manual-p-4214.php
Norton 14” 16” 18” 42” 72”, Cylindrical Grinders, Plain and Roll, Jet Parts Grinders, Instructions and 1545-7 Parts Manual
This Manual Covers Models:
14”
16”
18”
42”
72”
HI Swing
Jet Part
Type C
This Manual Includes:
Special Universal Jet Parts Grinders
Heavy Duty Hi-Swing Grinders
Cylindrical Grinders, Plain and Roll
Statistics on 14” 16” type C Grinding Mahcine
General Erecting Procedure
Units for All Models:
Tables
Headstocks
Live Spindle Attachments
Footstock
Wheel unit
Pumps
Feed Screw
Lubrication
Units for Hand Traverse Machines
Units for Mechanical Traverse Machines
Units for Hydraulic Machines
14” – 16” Roll Grinders
Grinding Procedure and General Instruction
Wheel Selection
Work Support
Setting up Routine
Grinding Compounds
Work Wheel and Traverse Speeds
Vibration
Please View Photo Gallery for more Content
This Manual Has 64 Printed Pages.
http://www.industrialmanuals.com/norton-type-universal-grinder-instruction-parts-manual-p-1587.php
Norton 12", 14" & 16" Type C Multi-Purpose Universal Grinder Instruction and Parts Manual
This Manual Covers Models:
12"
14"
16"
This Manual Includes:Manual 1261-5
Instructions for Getting the Machine Running
Section II: Multi-purpose Construction
Section III: Multi-purpose Operation
Section IV: Grinding Principles and General Procedure
Section V: Parts
List of Illustrations:
22 Figures-Functional Illustrated Diagrams with Component Identification
This Manual Has 50 Printed Pages.
http://www.industrialmanuals.com/norton-type-grinder-construction-operation-servicing-manua-p-4218.php
Norton 12”, 14” and 16” Type C, Grinder Construction Operation and Servicing Manual
This Manual Covers Models:
12”
14”
16”
This Manual Includes:
Instructions for Getting Machine Running
Multipurpose Construction
Pumps:
Hydraulic
Coolant
Force Feed
Lubrication
Multipurpose Operation
Grinding Principles and General Procedure
Setting up Routine
Important Points to Keep in Mind
Wheel, Work and Traverse Speeds
Vibration
Information
Norton Grinding Wheel Markings
Specifications
List of Illustrations:
Composite Erecting Drawing
Detail of Section through Headstock, Headstock and Face Plate
Detail of Footstock and Wheel Truing Device
Detail of Section through Wheel Slide
Multipurpose Wheel Slide Showing Assembly & Relationship of Parts
Rear View and Front View of 14 x 48”
Section thru Hydraulic Picker Feed
Section thru Table Speed and Control Valves
Section thru Hand Table Drive Apron
Controls on 16” Multipurpose with Heavy duty Headstock
Face Grinding with Cup Wheel & In 3 Jaw Chuck
Grinding Center Point in Headstock
Grinding Railroad Reamer
Grinding Expanding Collet with Beveled Wheel
Grinding Fellows Gear Shaper Cutter
Internal Grinding Setup
External Grinding in 3 jaw Chuck
Grinding Long Slender Work on Steady rests
Detail of Internal Grinding Set UP
Please View Photo Gallery for more Content
This Manual Has 46 Printed Pages.
http://www.industrialmanuals.com/norton-grinding-machines-instruction-10174-parts-manual-p-4213.php
Norton 12” U-4 & 14” LU-4, Grinding Machines, Instruction and 1017-4 Parts Manual Year (1970)
This Manual Covers Models:
12” U-4
14” U-4
This Manual Includes:
Uncrating and Setup
Lubrication
Construction
Operations
Grinding Principles and General Procedure
Replacement Parts Drawings:
Headstock and Footstock
Two-Speed Hand Traverse Apron
Wheel Feed Apron (Hand Operated and Semiautomatic)
Grinding feed Cylinder (Semiautomatic)
Feed Screw Unit
Hydraulic Wheel Head Traverse (Semiautomatic)
Table Control Valve and Cylinder
Combination & Selector Valves (Semiautomatic)
Wheel Spindle Unit
Wheel guard & Coolant Pipes
Steady rest and Center Rest
Knife Edge Valves
Bevel Gear Mechanism
Wheel Spindle Unit, Ball Bearing Thrust
Cross Index of Catalog Numbers
Please View Photo Gallery for more Content
This Manual Has 82 Printed Pages.
Year April 1970
http://www.industrialmanuals.com/norton-type-universal-grinder-quick-operations-manual-1941-p-4219.php
Norton 12” Type C, Universal Grinder, Quick Operations Manual Year (1941)
This Manual Covers Models:
12”
This Manual Includes:
Introduction
Headstock
Double Swivel Wheel Slide
Added Capacity
Wheel Spindle Bearing Adjustment. Spindle End Thrust Adjustment
Lubrication and Grinding Coolant
Mounting a Grinding Wheel
Wheel Balance, Speeds, Work Spe3eds
Work Drivers and Centers, Steadyrests
Truing the grinding Wheel
Setting up Routine (Cylindricatl Grinding)
internal Grinding, and Grinding Wheels
Standard Equipment
Illustrations Totaling: (20)
Please View Photo Gallery for more Content
This Manual Has 27 Printed Pages.
Year October 1941
Norton Model 81 Type B Crankpin Grinding Machine, Parts Manual Year (1943)
