Spitfire Model SP-F888-24 & 24N, Lapping Machine Instructions and Parts Manual

http://industrialmanuals.com/spitfire-model-spf88824-lapping-machine-instructions-parts-manual-p-4522.php

Spitfire Model SP-F888-24 and SP-F888-24N, Lapping Machine Instructions and Parts Manual Year (1970)

This Manual Covers Models:
SP-F888-24
SP-F888-24N
 
This Manual Includes:
Machining Plate and Drive System Assembly
CAC Equipped Gyro-Matics
Guide for Correcting Lapping Plate
Method for Restoring Lapping Plate Flatness
Light Band Measurement
Gentle and Dependable Power Transmission Device
Flexidyne Diagram
instruction Manual for No. 6D Dodge Flexidyne Drive
Replacement of Parts in No. 6D Dodge Flexidyne Drive
Operating Instructions for Pneumatic Pressure Arms
Setting Pressure
Setting Arm Travel Rate
Main Control Valves
Safety Switch
Method of Operation
Equalizing Abrasive Machining Plate Wear
Lubrications
Electrical System:  Machine Setup
General Operating Procedures
Abrasives
Piece Parts Flatness Test
Wiring Schematic
Pneumatic System Schematic
Mounting Layout for 24 Gyro
Abrasive Assembly Gyro Tank
Gyro Tank Parts List
PN lifts Assembly and Parts List
Caliper Adjustment Control Assembly for Gyro 24” (1967)
This Copy is Intellectually sound

This Manual Has 35 Printed Pages.
Year 1970

Sperry Magnetic Particle Inspection BDM 120 BDM 170 Operation Service Manual

http://industrialmanuals.com/sperry-magnetic-particle-inspection-operation-service-manual-p-1807.php

Sperry Magnetic Particle Inspection Unit BDM 120 & BDM 170 Technical Operators Instructions and Service Manual Year (1961)         

This Manual Covers Models:
BDM 120
BDM 170
Stationary II

This Manual Includes:
Introduction and Description
Special Service Tools
Preparation for Use , Storage or Shipment
Operation Instructions
Periodic Inspection
Maintenance
Lubrication
Trouble Shooting
List of Illustrations Totaling (13)
This Manual Has 27 Printed Pages.
Year 1961

Sperry Instruments DM5300 Digital Multimeter Operation Manual Year (1995)

http://industrialmanuals.com/sperry-instruments-dm5300-digital-multimeter-operation-manual-year-1995-p-1858.php

Sperry US-450 Series, Laboratory Scanners Instructions Wiring Parts Manual

http://industrialmanuals.com/sperry-us450-series-laboratory-scanners-instructions-wiring-parts-manual-p-5207.php

Sperry Automation US-450 Series, Laboratory Scanners Instructions Wiring and Parts Manual Year (1992)
 
This Manual Covers Models:
US-450
450
M71-1
This Manual Includes:
Introduction
Description of Controls
Setup and Alignment
Operating Procedure
Maintenance
Recommended Spare Parts List
Drawings
Schematic
Electrical Wiring Diagram

This Manual Has 41 Printed Pages.
Year January 1992

Speery C92160, Jig Borer, Numerical Control, Operations & Maintenance Manual 196

http://industrialmanuals.com/speery-c92160-borer-numerical-control-operations-maintenance-manual-p-4620.php

Speery C92160, Jig Borer, Numerical Control, Operations Maintenance and Schematics Manual Year (1963)

This Manual Covers Models:
C92160
copy 52
Reference A.O. 5060

This Manual Includes:
Pub RB-26-003
Specifications
Introduction
Tape Format and Preparation
Operating Instructions:
Start up Routine
Operating Routines
Principle of Operations
Installation and Maintenance:
External Wiring
Adjustments
Preventive Maintenance
Test Point Voltages, & Test Equipment
Replacement of Parts

This Manual Has 91  Printed Pages.
Year October 1963

Speedycut ST-0, ST-1 ST-2 ST-3, Tapping Machine Instructions and Parts Manual

http://industrialmanuals.com/speedycut-tapping-machine-instructions-parts-manual-p-4559.php

Speedycut ST-0 ST-1 ST-2 ST-3, Tapping Machine, Instructions and Parts Manual Year (1981)

This Manual Covers Models:
ST-0
ST-1
ST-2
ST-3
ST-1V
ST-2V
ST-3V
ST-1H
ST-2H
ST-3H
 
This Manual Includes:
Setup Instructions
Mounting of Tooling
Setting Spindle Speeds
Operational Elements
Electrical
Machining Hints
Maintenance

Appendices:
Gear Shaft A & B Assembly
Wiring Diagram
Secondary Switch Box
Troubleshooting
Specification Table

This Manual Has 26 Printed Pages.
Year 1981

Speedmaster ERA Radial Drill Operators Instruction and Parts List Manual

http://industrialmanuals.com/speedmaster-radial-drill-operators-instruction-parts-list-manual-p-1808.php

Speedmaster ERA Radial Drill Operators Instruction and Parts Lists Manual         

This Manual Covers Models:
ERA

This Manual Includes:
Instructions for the Installation Use and Maintenance of the Speedmaster Radial Drill
Introduction
4' 2" x 11"
Standard Equipment
Extra Equipment
Diagrams (Machine)
Setting Up Foundation
Leveling
Electrical Wiring Diagram
Lubrications
Preselected Speeds
Automatic Spindle Feed
Automatic Depth Control
Graduated Dials
Clutch Adjustment
Adjustment of Milling Head
Blocking Device Adjustment
Functional Illustrative Component Identification Diagrams

This Manual Has 20 Printed Pages.

Speedlap 12 B, Grinder Maintenance & Operation Parts Manual 1962

http://industrialmanuals.com/speedlap-grinder-maintenance-operation-parts-manual-1962-p-4619.php

SpeedLap 12 B, Grinder, Install Maintenance and Operation Manual Year (1962)

This Manual Covers Models:
12 B
B
12

This Manual Includes:
Installation Location
Electric Connections
Assembly Instruction with Diagram
Grit System
Lubrication
Abrasive Vehicle
Operations Instructions
General Instructions on Maintenance Lap Flatness: See D-129 Attached
Theory of Parallel Lapping
Non-Parallelity
Pricing sheet for 1961 But shows Needed supplies
Spare Parts List
Circuit Diagram 2/13/62

This Manual Has 16   Printed Pages.

Speedfam 32BTAW490, Abrasive Machine, Operations and Parts Manual 1990

http://industrialmanuals.com/speedfam-32btaw490-abrasive-machine-operations-parts-manual-1990-p-4558.php

Speedfam 32BTAW490, Abrasive Machine, Operations and Parts Manual Year (1990)

This Manual Covers Models:
32BTAW490
 
This Manual Includes:
instructions Manual Includes Spare Parts & Accessories
Installation
Maintenance
Operating Instructions
Flatness Control
Reclaim System
Operating Supplies
Drawings
Segment Installation

This Manual Has 60 Printed Pages.
Year 1990

SpeedFam 32", Abrasive Machining, Service Instructions & Spare Parts Manual

http://industrialmanuals.com/speedfam-abrasive-machining-service-instructions-spare-parts-manual-p-2188.php

SpeedFam 32", Abrasive Machining, Service Instructions – Supplies & Spare Parts Manual Year (1971)    
This Manual Covers Models:
32"

This Manual Includes: 
Installation and Maintenance
Operating Instructions
Reclaim System
Wheel Flatness Control
Flatness Correlation Charts
Segment Installation
Operating Supplies
Weight Table
Drawings
Wiring Diagrams
Spare Parts Lists

This Manual Has 65 Printed Pages.
Year 1971 and Prior

Speedaire 3JR76, 3JR77 and 4YN52, Compressor Parts Manual Year 2000

http://industrialmanuals.com/speedaire-3jr76-3jr77-4yn52-compressor-parts-manual-year-2000-p-4171.php

Speedaire 3JR76, 3JR77 and 4YN52, Compressor Parts Manual Year (2000)
 
This Manual Covers Models:
3JR76
3JR77
4YN52
English
Espanol
French
  This Manual Includes:
6.5 hp
Parts Lists
Functionally Illustrated Drawings showing Component Identification
This Manual Has 52  Printed Pages.
Year 2000

Spartanics Model 83, Punch Press Install Operations and Maintenance Manual 1985

http://industrialmanuals.com/spartanics-model-punch-press-install-operations-maintenance-manual-1985-p-5316.php

Spartanics Model 83, Punch Press Installation Operations and Maintenance Manual Year (1985)

This Manual Covers Models:
83
This Manual Includes:
Safety Tips
Introduction
Installation
Operations
Target Specifications
Troubleshooting
Inspection
Periodic Maintenance
General Maintenance
Adjustments
Ordering Parts
Illustrated Parts List
Tooling Specifications
Wiring Diagrams and
Electrical Schematics
Shipping
Illustrated Dictionary of Tools
Index
Record of Revisions

This Manual Has 85 Printed Pages.
Year 1985

Sparcatron SPF 60/120, Generator Owners Electrical Service Manual

http://industrialmanuals.com/sparcatron-60120-generator-owners-electrical-service-manual-p-4693.php

Sparcatron SPF 60/120 Generator, Owners Service Manual Year (1967)

This Manual Covers Models:
SPF
60/120
 
This Manual Includes:
Introduction
Installation
Operating Controls
Operating Procedure
Circuit Descriptions
Circuit Protection
List of Illustrations Totalling (12 Figures)
Please View our Photo Gallery for more Content


This Manual Has 60  Printed Pages.
Year March 1967

Spang K-5186, Plasma Torch Power Supply Operation, Parts & Electric Manual

http://industrialmanuals.com/spang-k5186-plasma-torch-power-supply-operation-parts-electric-manual-p-4557.php

Spang K-5186, Plasma Torch Power Supply Operations, Parts and Electric Manual

This Manual Covers Models:
Manual K-5186
 
This Manual Includes:
ISO 9001 Certified
Circuit Descriptions
General Description
Installation
Startup
Maintenance
Control Amplifier Manual (E6371)
Air Conditioner
Component Literature
Spare Parts Lists
Drawings
Schematic Diagrams:
Control Amplifier
parts
Voltage & Current
Controller Assembly Diagram
Pulse Timing Circuit
Pulse Circuit Assembly Diagram and Description
Gate Pulse Amplifier Description – Diagram – Assembly
Check your load interrupter switch
Installation,
Start Up
Service Instructions
Dimensions, Parts unit, Unit weight
Return Air Filters
pulley and Drive Adjustments
Fan Charts
Product Data (Carrier)

Revisions: Aluminum Arc Furnace Rectifier Transformer
Piping Schematic
Plan View Layout
Plan View Schematic
List of Material and Nameplate Legend (1996)
Outline
Manual for E7518.  K5186
SCR Bridge – 10 G.P.M.
Interphase Transformer – 3 G.P.M.
Choke -12 G.P.M.

This Manual Has 151 Printed Pages.
Year 1996

Southwestern Trak K3 Operation & Parts Manual Year 2000

http://industrialmanuals.com/southwestern-trak-operation-parts-manual-year-2000-p-540.php

Southwestern Trak K3 Operation & Parts Manual
This Manual Covers Models:
Trak K3

This Manual Includes:
I.M. inventory # B-175a
Safety
Service
Parts List
Operation
Installation
Maintenance 
This manual is about 113 pages
Year 2000
Document P/N 21087
Version 083000

Southwestern Trak K2 Operation & Parts Manual Year 1998

http://industrialmanuals.com/southwestern-trak-operation-parts-manual-year-1998-p-541.php

Southwestern Trak K2 Operation & Parts Manual
This Manual Covers Models:
Trak K2

This Manual Includes:
I.M. inventory B-176a
Safety
Service
Parts List
Operation
Installation
Maintenance 
This manual is about 113 pages
Year 1998
Document P/N 21086
Version 031998

Southwestern Trak A.E.G. 2 & 3 CAD/CAM Interface Manual 1997

http://industrialmanuals.com/southwestern-trak-cadcam-interface-manual-1997-p-539.php

Southwestern Trak AEG 2 & 3 CAD/CAM Interface Manual

This Manual Covers Models:
Trak A.E.G. 2 CAD/CAM
Trak A.E.G. 3 CAD/CAM

This Manual Includes:
I.M. inventory B-174a
Specifications
Setup
Receiving A Program
Trouble Shooting RS232
CAD/CAM Trak A.G.E. 2
CAD/CAM Trak A.G.E. 3
DNC Trak A.G.E. 3
 
This manual is about 41 pages
Year 1997
Document P/N 20260
Version 061897

Southwestern Proto Trak Edge, 062503 Programming & Operations Manual 2004

http://industrialmanuals.com/southwestern-proto-trak-edge-062503-programming-operations-manual-2004-p-4697.php

Southwestern Proto Trak Edge, 062503 Programming and Operations Manual Year (2004)

This Manual Covers Models:
Proto Trak
062503
 
This Manual Includes:
Introduction
Description
Definitions, Terms & Concepts
Using the Proto TRAK Edge as a DRO
Using TEACH
Programming
Changing or Correcting programs
Making Parts with the CNC
Math Help
Program Memory & Storage
Service Codes

This Manual Has 38  Printed Pages.
Year 2004

Southwestern Industries, TRAK TRM, Milling, Operations & Maintenance Manual 1994

http://industrialmanuals.com/southwestern-industries-trak-milling-operations-maintenance-manual-1994-p-2530.php

Southwestern Industries, TRAK TRM, Milling Machine, Installation – Operations Maintenance & Safety Manual Year (1994)             

This Manual Covers Models: 
TRAK TRM

This Manual Includes: 
I.M. Inventory # S-114SB
P/N 16046
Ver. 922394Safety
Description
Installation
Operation
Maintenance Parts Lists
Functional Illustrated Drawings Showing Component Identification
This Manual Has  83 Printed Pages.
Year 1994

Southwestern Industries, ProtoTRAK MX2, Milling Machine, Programming Manual 1994

http://industrialmanuals.com/southwestern-industries-prototrak-milling-machine-programming-manual-1994-p-2532.php

Southwestern Industries, ProtoTRAK MX2, Milling Machine, Programming Operations & Care Manual Year (1994)             

This Manual Covers Models: 
MX2
This Manual Includes: 
I.M. Inventory # S-116SB
P/N 16010
VER022593
Introduction
Description
Definitions, Terms & Concepts
DRO Mode
Program Mode
Edit Mode
Set Up Mode
Program Run Mode
Math Help Mode
Program In/Out Mode
This Manual Has  84 Printed Pages.
Year 1994

Southwestern Industries, ProtoTRAK M2 & M3, Milling, Service Manual Year (1997)

http://industrialmanuals.com/southwestern-industries-prototrak-milling-service-manual-year-1997-p-2531.php

Southwestern Industries, ProtoTRAK M2 & M3, Milling Machine, Service Manual Year (1997)             

This Manual Covers Models: 
M2
M3

This Manual Includes: 
I.M. Inventory # S-115SB
P/N 20301
Version: 011497
Introduction to Self-Service
Troubleshooting by Symptom
Diagnostics Sections 3 & 4
Procedure
Service Codes
Figures totaling (25)

This Manual Has  105 Printed Pages.
Year 1997

Southwestern Industries, ProtoTRAK EDGE, Programming Operations, Training Manual

http://industrialmanuals.com/southwestern-industries-prototrak-edge-programming-operations-training-manual-p-2534.php

Southwestern Industries, ProtoTRAK EDGE, Programming & Operations, Self Training Manuals Year 2001              

This Manual Covers Models: 
ProtoTRAK
EDGE
Self Training

This Manual Includes: 
I.M. Inventory # S-119SB
P/N 22061
Version 081600
Introduction
Description
Definitions, Terms & Concepts
Using the ProtoTRAK Edge as a DRO
Using Teach
Programming
Changing or Correcting Programs
Making Parts with the CNC
Math Help
Program Memory & Storage
Service Codes

Self Training:
P/N 22060
Version 031400
Introduction
Definitions, Terms & Conventions
Basic operation
Sample Parts 1
Additional Sample Programs Available

This Manual Has  70 Printed Pages.
Year 2001

Southwestern Industries TRAK 100 Series, Operating & Care Manual

http://industrialmanuals.com/southwestern-industries-trak-series-operating-care-manual-p-2527.php 

Southwestern Industries Trak 100 Series, Operating & Care Manual             

This Manual Covers Models: 
TRAK 100
TRAK 102
TRAK 103

This Manual Includes: 
I.M. Inventory # S-110SB
REV. 022289
P/N: 15533
Introduction
Description
Back Panel
incremental and Absolute Dimensions
Power interruption
Maximum Display Readout Limits

Configuring Your TRAK 100
General Operation
Make-Learn Operation
Tool Offset Operation
Print/Alert Option operation
Calibration Procedure
Care and Warranty
Trak 100 Display Installation Instructions
Chapter 11: Trak Sensor Installation Instructions

This Manual Has  29 Printed Pages.

Southwestern Industries Prototrak, Milling Machine, Programming Manual 1989

http://industrialmanuals.com/southwestern-industries-prototrak-milling-machine-programming-manual-1989-p-2523.php

Southwestern Industries Prototrak, Milling Machine, Programming – Operations & Care Manual Year (1989)             

This Manual Covers Models: 
Prototrak

This Manual Includes: 
I.M. Inventory # S-106SB
Rev. PT90.94.19.89
Introduction
Description
Definitions, Terms and Conditions
DRO Operation
Do One Operation – Program and Run
Programming and Program Run
Math Help
Care and Service
This Manual Has  62 Printed Pages.
Year 1989

Southwestern Industries ProtoTRAK M2 & M3, CAD/CAM Interface Programming Manual

http://industrialmanuals.com/southwestern-industries-prototrak-cadcam-interface-programming-manual-p-2526.php

Southwestern Industries ProtoTrak M2 & M3, CAD/CAM & DNC Interface, Milling Machine, Programming Manual Year (1996)             

This Manual Covers Models: 
M2
M3
CAD/CAM
CAD/CAM/DNC

This Manual Includes: 
I.M. Inventory # S-109SB
Document: P/N 2025
Version: 032296
Introduction
Glossary of Terms
RS232 Specifications
Setting Up the ProtoTRAK M2, M3 & Computer to Communicate VIA RS232
Sending a Program to the Computer from the M2 and M3
Receiving a Program at the ProtoTRAK M2 or M3
Troubleshooting the RS232
CAD/CAM – ProtoTRAK M2 & M3
DNC ProtoTRAK M3
This Manual Has  57 Printed Pages.
Year 1996

Southwestern Industries ProtoTrak Edge Self-Training Manual

http://industrialmanuals.com/southwestern-industries-prototrak-edge-selftraining-manual-p-2991.php

Southwestern Industries ProtoTrak Edge Self-Training Manual

This Manual Covers Models: 
Proto Trak
Edge CNC
Training

This Manual Includes: 
Introduction
Definitions, Terms & Conventions
Basic Operation
Sample Part 1
Additional Sample Programs
You get the Answers in the Back :l
This Manual Complete Has  40  Printed Pages.

Southwestern Industries ProtoTrak Edge 3 CNC DPME2, Programming & Op's Manual

http://industrialmanuals.com/southwestern-industries-prototrak-edge-dpme2-programming-manual-p-2989.php

Southwestern Industries ProtoTrak Edge 3 CNC, Trak DPME2, CNC MILL, Programming Operating & Safety Care Manual Year (2004)

This Manual Covers Models: 
Proto Trak
Edge 3 CNC
Trak DPME2

This Manual Includes: 
Introduction
Safety
Description
Basic Operation
Definitions, Terms & Concept
Using the Proto Trak Edge as a DRO
Programming
Changing or Correcting Programs
Making Parts With The CNC
Math Help
Program Memory and Storage
Service Codes
This Manual Complete Has  57  Printed Pages.
Year 2004

Southwestern Industries ProtoTrak Edge 3 Control Maintenance Service Manual

http://industrialmanuals.com/southwestern-industries-prototrak-edge-control-maintenance-service-manual-p-2990.php

Southwestern Industries ProtoTrak Edge 3 Control Maintenance Service and Parts Manual Year (2004)

This Manual Covers Models: 
Proto Trak
Edge CNC

This Manual Includes: 
Safety
Installation
Troubleshooting by Symptom
Diagnostics
Procedures for Replacement & Maintenance
List of Figures Totaling (45)
Parts Lists & Drawings
This Manual Complete Has  114  Printed Pages.
Year 2004

Southwestern Ind. TRAK MP-10 Control Operations Manual

http://industrialmanuals.com/southwestern-trak-mp10-control-operations-manual-p-206.php

Southwestern Industries Inc.TRAK MP-10 Operations & Care Manual

This Manual Includes:
Introduction
Description
Operation
Special Features
Proper Care Warranty
TRAK Sensor Encoder Installation Instructions
This Manual is 15 Pages Long.

Southbend SBL 500, Lathe Parts List Manual Year (1983)

http://industrialmanuals.com/southbend-lathe-parts-list-manual-year-1983-p-4482.php

Southbend SBL 500, Lathe Parts List Manual Year (1983)

 
This Manual Covers Models:
SBL 500
  This Manual Includes:
Parts Lists
Functionally Illustrated Diagramed Drawings showing Component Identification and Assembly

This Manual Has 58 Printed Pages.
Year 1983

Southbend 17" and 20", Lathe Operations Maintenance and parts Manual

http://industrialmanuals.com/southbend-lathe-operations-maintenance-parts-manual-p-4481.php

Southbend 17”and 20”, Lathe, Operations Maintenance and Parts Manual

 
This Manual Covers Models:
17”
20”
 
This Manual Includes:
Bulletin 725OA
Description
Preparation for Use
Operations
Lubrication
Maintenance
Operational Checks
Shutdown and Storage
Specifications

This Manual Has 85 Printed Pages.

South Bend Nordic 15, Operations Mainteancne Parts & Electrical Manual

http://industrialmanuals.com/south-bend-nordic-operations-mainteancne-parts-electrical-manual-p-4690.php

South Bend Nordic 15, Operations Maintenance Parts and Electrical Manual

This Manual Covers Models:
15
15”
Nordic
 
This Manual Includes:
Bulletin 7015
Technical Data
Installation
Control Table
Electrical Equipment:
Connection and Electrical Wiring Diagrams
Operating the Lathe:
Start up, Speed and Feed Selection
Longitudinal or Cross Feed Motion

Adjustments and Dismantling
Lubrication
How to use Thread Chasing Dial.
Parts Lists
Functionally Illustrated Drawings showing component Identification

This Manual Has 91  Printed Pages.

South Bend Lathe, CE3458, 10" 13" 14 1/2" 16" 16/24", Maintenance & Parts Manual

http://industrialmanuals.com/south-bend-lathe-ce3458-1624-maintenance-parts-manual-p-4681.php

South Bend Lathe, CE3458, 10” 13” 14 ½” 16” and 16/24”, Maintenance and Parts Manual Year (1995)

This Manual Covers Models:
CE3458
10”
13”
14 ½”
16”
16/24”
 
This Manual Includes:
This manual is missing the parts breakdown of the saddle and cross slide.
Maintenance
Parts Lists
Functionally illustrated Drawings showing Component Identification
This Manual Has 84  Printed Pages.
Year December 1995

South Bend Lathe Works, No. 30-A Attachement Parts List Manual

http://industrialmanuals.com/south-bend-lathe-works-attachement-parts-list-manual-p-1796.php

South Bend Lathe Works, No. 30-A Lathes and Attachments, Parts List Manual Year (1946)         

This Manual Covers Models:
10 Inch and Larger
No. 30-A

This Manual Includes:
Introduction
Diagram showing Principal Parts of South Bend Underneath Motor Drive Lathe
Equipped with English Gear Box and Lead Screw
How to Order Replacement Parts
Parts Lists
Attachment Parts Lists
This Manual Has 20 Printed Pages.
Year 1946

South Bend lathe Works, 9 Inch Parts Lists No. P-15-YBC Manual Year (1944)

http://industrialmanuals.com/south-bend-lathe-works-inch-parts-lists-p15ybc-manual-year-1944-p-1800.php

South Bend Lathe Works, 9 Inch Parts Lists No. P-15-YBC Manual Year (1944)         

This Manual Covers Models:
9 Inch
No. P-15-YBC

This Manual Includes:
How to Order Replacement Parts
Parts Lists
Functional Photographs with Component Identification
This Manual Has 9 Printed Pages.
Year 1944

South Bend Lathe Works, 9 Inch Model B, Motor Drive Bench Lathe Parts Manual

http://industrialmanuals.com/south-bend-lathe-works-inch-model-motor-drive-bench-lathe-parts-manual-p-1798.php

South Bend Lathe Works, 9 Inch Model B, 12-Speed Horizontal Motor Drive Bench Lathe Parts List No. P-677 Manual Year (1943)         

This Manual Covers Models:
9 Inch
Model B
B
No. P-677
12-Speed Horizontal Motor Drive

This Manual Includes:
Parts Lists
12-Speed Horizontal Motor Drive
Headstock Parts
Change Gear Parts
Horizontal Motor Drive Parts
Tailstock Parts
Leg Parts
Apron Parts
Motor Control Switch Parts
Repair Parts Supplied Only for South Bend Lathes
How to Order Replacement Parts, Gears, Threaded Parts
Functional Photographs with Component Identification
This Manual Has 12 Printed Pages.
Year 1943

South Bend Lathe Works, 9 Inch Model A, Parts List No. P-444 Lathe Manual 1943

http://industrialmanuals.com/south-bend-lathe-works-inch-model-parts-list-p444-lathe-manual-1943-p-1801.php

South Bend Lathe Works, 9 Inch Model A Parts Lists No. P-444 Horizontal Motor Drive Lathe Manual Year (1943)         

This Manual Covers Models:
9 Inch
No. P-444
Model A

This Manual Includes:
How to Order Replacement Parts
Parts Lists
Functional Photographs with Component Identification
This Manual Has 10 Printed Pages.
Year 1943

South Bend Lathe Works, 9 inch Model A, B, C, Parts List No. 30-B Lathes Manual

http://industrialmanuals.com/south-bend-lathe-works-inch-model-parts-list-lathes-manual-p-1799.php

South Bend Lathe Works, 9 Inch Models A, B, and C, Parts Lists No. 30-B Lathes and Attachments Manual Year (1947)         

This Manual Covers Models:
9 Inch
A
B
C
No. 30-B

This Manual Includes:
First Reprint
Introduction
How to Order Replacement Parts
Lathe Unit Parts Lists
This Manual Has 20 Printed Pages.
Year July 1947

South Bend Lathe Works, 16 Inch Toolroom Lathe, Parts Lists No. P-16 Manual 1943

http://industrialmanuals.com/south-bend-lathe-works-inch-toolroom-lathe-parts-lists-manual-1943-p-1803.php

South Bend Lathe Works, 16 Inch P-16, Parts Lists, Bench Lathe Manual, Year (1943)         

This Manual Covers Models:
9 Inch
P-16

This Manual Includes:
How to Order Replacement Parts
Threaded Parts
Parts Lists
Functional Photographs with Component Identification

Toolroom Lathes:
Headstock
Quick Change Gear Box
Saddle
Compound Rest
Apron
Motor Drive Unit
Tailstock
Chip Pan and Leg
Motor Control Switch
Taper Turning Attachment
Handwheel Draw-in Collet Attachment
Collet Rack
Micrometer Carriage Stop
Thread Dial Indicator
Thread Cutting Stop

This Manual Has 19 Printed Pages.
Year January 1943

South Bend Lathe Works, "The Installation and Leveling of the Lathe" Manual

http://industrialmanuals.com/south-bend-lathe-works-installation-leveling-lathe-manual-p-1794.php

South Bend Lathe Works, “The Installation and Leveling of the Lathe" Manual         

This Manual Covers Models:
Reference Information
Bulletin H-3

This Manual Includes:
How to Get the Most Out Of Your Lathes
The Installation and Leveling of the Lathe
Lighting is Very Important
Floor Space Required
Solid Floor
Securing the Lathe to the Floor
Longitudinal Leveling
Many Different Types of Leveling
Turning Test for Leveling
3^rd Edition
This Manual Has 20 Printed Pages.
Year 1944

South Bend Lathe Works, "Oiling The Lathe", Manual

http://industrialmanuals.com/south-bend-lathe-works-oiling-lathe-manual-p-1795.php

South Bend Lathe Works, “Oiling The Lathe" Manual         

This Manual Covers Models:
Reference Information
Bulletin H-2

This Manual Includes:
How To Get the Most Out of Your Lathes
Oiling the Lathe
The Importance of Adequate Lubrication
Technical Service Department
Functions of Lubricants
Using the Correct Oil
Making Lubrication a Habit
Headstock
Lubrication of Superfinished Spindles
Quick Change Gear Mechanism
Carriage and Lathe Bed
Reservoirs, Tailstock
Motor and Drive Mechanism
How to Clean the Lathe after Oiling
This Manual Has 20 Printed Pages.
Year 1944

South Bend Lathe Works, "How to Run A Lathe", Manual Year (1956)

http://industrialmanuals.com/south-bend-lathe-works-lathe-manual-year-1956-p-1791.php

South Bend Lathe Works, “How to Run a Lathe" Manual         

This Manual Covers Models:
Reference Information

This Manual Includes:
Screw Cutting lathe
How to Become a Machinist
Care and Operation
History and Development
Setting Up the Lathe
Operating the Lathe
Drilling
Reaming
Taping
Formulas ETC.
This Manual Has 128 Printed Pages.
Year 1956

South Bend Lathe Works Lubrication Charts No. 5426 Manual

http://industrialmanuals.com/south-bend-lathe-works-lubrication-charts-5426-manual-p-1792.php

South Bend Lathe Works, Lubrication Charts, Chart 5426, Manual         

This Manual Covers Models:
10"
13"
14 ½"
16"
16-24"
1000 Series
2H Turret Lathes

This Manual Includes:
Set Up Procedure
Operational Maintenance
Functional Illustrations with Component Identification
Leveling the Lathe
Belt Care and Maintenance
Belt Adjustments
This Manual Has 5 Printed Pages.

South Bend Lathe Manuals, CLEAN - OIL - Install & Leveling - Keep Trim Manuals

http://industrialmanuals.com/south-bend-lathe-manuals-clean-install-leveling-keep-trim-manuals-p-4556.php

South Bend Lathe Manuals, Clean – Oil – Install & Leveling – Keep Trim Manuals Year (1943)

This Manual Covers Models:
Bulletin H-1 thru H-4
Lathes
 
This Manual Includes:
Keep Your Lathe CLEAN
Oiling the Lathe
The Installation and Leveling of the Lathe
Keep Your Lathe In Trim

You get ALL of THESE!

This Manual Has 85 Printed Pages.
Year 1943 Edition

South Bend Lathe HRG, Deka, Drilling Tapping Machine, Setup & Parts Manual 1995

http://industrialmanuals.com/south-bend-lathe-deka-drilling-tapping-machine-setup-parts-manual-1995-p-2202.php

South Bend Lathe HRG, Deka, Drilling – Tapping Machine, Set up & Parts Manual Year (1995)  

This Manual Covers Models:
HRG

This Manual Includes: 
This Manual Applies to All Models
Drilling, Tapping, Counterboring, Chamfering
Bulletin 7612
Safety Instructions
Set Up Instructions
Instructions for Dual Feed-Dual Speed Machines
lubricating Instructions

Deka Drill Manual:
Illustrations and Parts Lists
Machine Assembly Drawing
Functional Illustrations Showing Component Identifications and Assemblies

Parts List for Spindle and Driver Assemblies
This Manual Has 47 Printed Pages.
Year 1995

South Bend Johnson 27-150 Ton, Press Operations and Mainteancne Manual

http://industrialmanuals.com/south-bend-johnson-27150-press-operations-mainteancne-manual-p-4696.php

South Bend Johnson 27-150 Ton, Press Operations and Maintenance Manual

This Manual Covers Models:
27-150 Ton
Air Clutch Controlled
 
This Manual Includes:
Bulletin 7719
Safety
Operators Check List
Die Setters Check List
Preparation for use
Operational Procedures
Pre Installation check List
Lubrication Procedures
Maintenance Procedures
Maintenance Check List
Illustrations and Parts Lists

This Manual Has 60  Printed Pages.

South Bend GH 50/1000, FORADIA Radial Drill, Eng & Span, Operators Manual

http://industrialmanuals.com/south-bend-501000-foradia-radial-drill-span-operators-manual-p-4683.php

South Bend GH 50/1000, FORADIA Radial Drilling, English & Spanish, Operators Manual Year (1979)

This Manual Covers Models:
GH 50/1000
 
This Manual Includes:
FORADIA Radials
Type Serial No. 5374
Introduction
Description
Installation
Operating Instructions
Lubrication
Drawing Pages:
Spindle Head Vertical Sections
Spindle Head Horizontal Section
Elevating Box Vertical Section
Armlock Horizontal Section
Wiring Diagram
Description of Electrical Equipment

This Manual Has 22  Printed Pages.
Year 1979

South Bend Fourteen, Lathe Operations Maintenance Parts & Electrical Manual 1979

http://industrialmanuals.com/south-bend-fourteen-lathe-operations-maintenance-parts-electrical-manual-1979-p-4688.php

South Bend Fourteen, Lathe Operation Maintenance Parts & Electrical Diagrams Manual Year (1979)

This Manual Covers Models:
Fourteen
  This Manual Includes:
Bulletin 7014
Safety Instructions
Preparation for Use
Operation
Lubrication
Maintenance
Parts Lists
Functionally Illustrated Drawings showing component Identification
Electrical Diagrams: (2)
Part 1333-15
Tachometer Transformer Wiring


This Manual Has 54  Printed Pages.
Year 1979