Toshiba BMC-8B, Milling Machine Schematics Manual 1977

http://industrialmanuals.com/toshiba-bmc8b-milling-machine-schematics-manual-1977-p-5218.php

Toshiba BMC-8B, Milling Machine Schematics Manual Year (1977)
 
This Manual Covers Models:
BMC
8B
BMC-8B
This Manual Includes:
Schematic Diagrams and Circuits
Power Circuits
A.C. Control Circuits
Input module Circuits
Output Module Circuits
Relay Driver
D.C. control Circuits Including Servo Motor Circuits
Spindle Circuits
Electrical Parts Lists

This Manual Has 84 Printed Pages.
Year 1977

TOS SUS, SUS 63-80 SSS 63-80, Lathe Operation Service Wiring and Parts Manual

http://industrialmanuals.com/6380-6380-lathe-operation-service-wiring-parts-manual-p-5664.php

TOS SUS, SSS 63-80 Lathe Operations Service and Parts Manual Year (1974)

This Manual Covers Models:
SUS
SSS
63-80
63
80  
This Manual Includes:
Operating Instructions
Guiding Particulars of Machine
Technical Data of Machine
Test Chart of Machine
Technical Description
Diagram of Machine Drive
Machining Possibilities
Transport of the Machine
Dimensions of the Machine
Erection

Electric Wiring of the Machine
Electrical Equipment and Connection to Mains
Basic Wiring Diagrams:
SUS 63-80
SSS 63-80
SUS 63-80 Reduced Speed
Electric Wiring on Machine
Electric Motors Used

Description of Main Parts of the Machine
Their Functions
Maintenance
Optional Equipment
Description
Operation
maintenance
Special Machine Constructions
Trial Operation after Erection of the Machine
Machine Efficiency
Tread Cutting

This Manual Has 116 Printed Pages.
Year 1974

TOS Strojimport BEV 80-100, Cylinder Grinder Operation Methods and Design Manual

http://industrialmanuals.com/strojimport-80100-cylinder-grinder-operation-methods-design-manual-p-4569.php

TOS Strojimport BEV 80-100, Cylinder Grinder, Operation Methods and Design Manual

This Manual Covers Models:
BEV 80-100
 
This Manual Includes:
Choosing a TOS Machine.

Grinding Method, Selection and Maintenance of Grinding Wheels
Design of the Grinder with Brief Description of Machine Groups
Application of Machine
Erection of Grinder and Operators Site
Standard and Optional Equipment
typical Application of the Machine and Examples of Work
Time Studies to Given Examples
Ordering of New machine and choice of suitable optional equipment
Ordering of Spare Parts and Parts Subject to Wear
Special Purpose Machines Setup for Selected job

For Production Engineers, Chief Technicians

This Manual Has 45 Printed Pages.

TOS SN 55B 63B & 71B, Lathe Operating Instructions Maintenance & Assembly Manual

http://industrialmanuals.com/lathe-operating-instructions-maintenance-assembly-manual-p-4570.php

TOS SN 55B 63B & 71B, Lathe Operating Instructions, Maintenance & Assembly Drawings Manual Year (1976)

This Manual Covers Models:
55B
63B
71B
 
This Manual Includes:
T-262 Operations & Maintenance with T-260 Assemblies

Your Serial Number is Stamped on the Guide ways or on the Machine BED.
Description of Operating Parts of the Machine
Adjustments of Main Spindle the front Bearing on these sheets
Optional Equipment in Pictorial Part Totaling (11)
Principal Data of the Machine
Specifications
Technical Description of the Machine
Gear Train
Transport of the Machine
Erection of the Machine
Electrical Equipment of the Machine & Connection to Mains
Instructions for Servicing the Electrical Equipment defects and how to rid of them
Operation of the Machine
Description of the Main Sub-Assemblies, their Operation and Servicing
Trial Run of the Machine
thread Cutting
Chart of Cutting Speeds
Lubrication of the Machine
Bearings Employed
Belts Employed
Sealing rings employed
List of Parts Subject to Wear
Instructions for ordering Spare Parts
Description of the Optional Equipment/ some Equipment only (18)
List of Drawings Totaling (29)
Machine Drawings
OB Drawings
OBVOD 220V Circuits
OBR 7b Circuits
Charts
Graphs

Functionally Illustrated Machine Views showing Component Identifications


This Manual Has 108 Printed Pages.
Year 1976

TOS SN 40B 45B & 50B, SV18RA, lathe Operations and Maintenance Manual 1976

http://industrialmanuals.com/sv18ra-lathe-operations-maintenance-manual-1976-p-4571.php

TOS SN 40B 45B & 50B, SV 18, Lathe Operations and Maintenance Manual Year (1976)

This Manual Covers Models:
40B
45B
50B
SV 18 RA
 
This Manual Includes:
Your Serial Number is Stamped on the Guide ways or on the Machine BED.
Min Data of the Machine
Optional Equipment and Special Execution of the Machine
Specification of the Machine / with Standard Equipment
Specification of the Optional Equipment
Technical description of the machine
Gear Train of the Machine
Transport of the Machine
Erection of the Machine, Foundation Plan
Electrical Equipment and Connection to Mains
Instructions on Servicing the Electrical Equipment
Control of the Machine
Description of the Main Sub-Assemblies
Test Run of the Machine
Copying Attachment
Thread Cutting
Nomograph of Cutting Speed
Lubrication of the Machine
Bearings Employed
Sealing rings Employed
Belts employed
List of Parts Subject to Wear
Instructions for Ordering Spare Parts
Description of Some Optional Equipment and Special Execution of Machine Totalling (17)
Listed Drawings in Pictorial Part of Operational Instructions Totaling 30.

This Manual Has 67 Printed Pages.
Year 1976

Tos SN 40A, 45A 50A, Centre Lathe Technical Instructions Manual Year (1968)

http://industrialmanuals.com/centre-lathe-technical-instructions-manual-year-1968-p-2238.php

TOS SN 40A 45A 50A, Centre Lathe Technical Instructions Manual Year (1968)    

This Manual Covers Models:
SN40A
SN45A
SN50A

This Manual Includes: 
OSAN DPS 1-7706/67 – St 28 400-68
Serial Number of Machine Stamped on the Guide Ways or on the Machine Bed

General Data of the Machine
List of Optional Equipment and Special Execution of Machine
Specification of the Machine /with standard Equipment
Specification of the Optional Equipment
Technical Description of the Machine
Gear Train of the Machine
Transport of the Machine
Erection of the Machine – foundation drawing
Electrical Equipment and Connection to Mains
Instructions for Maintenance of the Electrical Equipment
Operation of the Machine electric motor
Nomograph of Cutting Speed /application
Lubrication of the Machine
Bearings Employed
Sealing Rings Employed
Belt Employed
Specification of parts subject to Wear
Instructions for Ordering Spare Parts
Description of the Optional Equipment /some groups only
List of Drawings in Separate Parts of Manual
Vertically Adjustable Carriage
Boring Table
Bar for Taper Turning
Table for Dividing obtained by the indexing attachment
 Threading Dial & Longitudinal Stop Drum
Indexing Attachment fo the Spindle
Tool post Grinder for external and internal grinding
Spline and Gear Milling Attachment IKS rear Hydraulic Copying
This Manual Has  59  Printed Pages.
Year 1968

TOS S28, Center Lathe Operations and Parts DRawings Manual 1963

http://industrialmanuals.com/center-lathe-operations-parts-drawings-manual-1963-p-4727.php

TOS S28, Center Lathe Operations and Parts Drawings Manual Year (1963)

This Manual Covers Models:
S28
 
This Manual Includes:
Technical Data
Electrical Installation
Diagram of Connections
Main Dimensions
Erection of the Machine
Starting the Machine
Machine Servicing Parts
Description of the Maintenance
Equipment Supplied only on Special Order
Economic Machining
Practical Calculations
CH. Spare parts
Illustrations

This Manual Has 67  Printed Pages.
Year 1963

Tos BU-28, Lathe, Installation Operations & Maintenance Manual

http://industrialmanuals.com/bu28-lathe-installation-operations-maintenance-manual-p-4572.php

TOS Bu-28, Lathe, Installation Operations & Maintenance Manual

This Manual Covers Models:
BU-28
 
This Manual Includes:
Basic Data
Transport and Installation of Machine
Electrical Parts of Machine
Hydraulic Part of Machine
Machine Operation
Grinding Technique
Maintenance of Machine
Accuracy Test Chart of Machine
This Manual Has 117 Printed Pages..

TOS BN102A, Hostivar Lathe Operations and Assembly Drawings Manual 1977

http://industrialmanuals.com/bn102a-hostivar-lathe-operations-assembly-drawings-manual-1977-p-4729.php

TOS BN102A, Hostivar Lathe Operations Assembly Drawings Manual Year (1977)

This Manual Covers Models:
BN102A
 
This Manual Includes:
Packing List
Universal Toolroom Grinder
S/N 038481
Test Chart
Operations Instructions:
General Data
Specification of Standard Equipment and Optional Equipment
Technical Data
Description and Operating Principle
Working Scope of Basic Machine
Handling of Machine
Installing of Machine on Foundation
Electric Equipment
Description of Essential Machine Units, General Operations Instruct
Machine Controls
Wheelhead, Pillar, Belt Tensioning
Vertical Adjustment of Wheelhead
Cross Travers of Slide
Table Support
Longitudinal Traverse of Table
Limiting of Table Traverse
Table Swivelling
Workhead
Tailstocks
Mounting of Grinding Wheels
Setting Gauge
Tooth Rests
Grinding Wheel guards
Trial Run Following Machine Installation
Machine Lubrication
Instructions for Grinding
Lists of Parts Subject to Wear
How to Order Replacement Parts
Summary of Figures and Tables
Manual of Assemblies

This Manual Has 84  Printed Pages.
Year 1977

TOS 63C-71C, Lathe Operations Maintenance and Electrical Manual 1962

http://industrialmanuals.com/63c71c-lathe-operations-maintenance-electrical-manual-1962-p-4728.php

TOS 63C-71C, Lathe Operations Maintenance and Electrical Manual Year (1962)

This Manual Covers Models:
63C-71C
63C
71C
 
This Manual Includes:
General Information
Characteristic of the Machines
Specifications of Machines
Specifications of Optional Extras
Transport
Machine Installation – Foundation Plan
Kinematic Diagram
Detailed Description of Electric Circuits
Description of Machine Main Groups
Test Run of the Machine
Lubrication of the Machine
Normal Accessories
Optional Extras
Special Versions of the Machine
Description of Options
Thread Cutting
Nomograph of Cutting Rates
Used Bearings
Used packing Rings
Used Belts
List of Parts that Wear Off Easily
Ordering instructions
Diagnostics in Mechanical Part of the Machine
Diagnostics in Electrical Part of Machines
Concluding Remarks
This Copy is Intellectually Sound

List of Figures and Tables Totaling (34)

This Manual Has 91  Printed Pages.
Year 1962

TOS 102 and BN102, Universal Grinding Operations and Assemblies Manual

http://industrialmanuals.com/bn102-universal-grinding-operations-assemblies-manual-p-4726.php

TOS  102 and BN102, Universal Grinding Operations and Assemblies Manual

This Manual Covers Models:
BN102
102
 
This Manual Includes:
Basic Data of the Machine
Specifications
Technical Data
Working Possibilities of the Machine
Transportation of the Machine
Erection of the Machine
Electrical Installation of the Machine
Description of the Main Groups of the machine – their Operation
Test run of the machine After Its Erection on its Foundation
Lubrications
Instructions for Grinding
Setup
Used Bearings, Used Belts
List of Parts Subject to Wear
Ordering Spare Parts
Summary of Drawings and Tables
List of Illustrations and Tables
Illustrations of Special Equipment

This Manual Has 50  Printed Pages.

Torrington Swaging Machine, Service and Parts Manual 1969

http://industrialmanuals.com/torrington-swaging-machine-service-parts-manual-1969-p-4725.php

Torrington Swaging Machine, Service and Parts Manual Year (1969)

This Manual Covers Models:
100
111
211
312
323
433
434
436
438
1033
1047
4315
100-169
100-170
 
This Manual Includes:
Swaging Action
sold Material
Tubing
Setting Up the Torrington Swaging Machine
Rotary Type Machines
Setting for Blow and Die Opening
Shims
Dies
Difficulties and Remedies
General Maintenance
Lubrication
Rolls and Rollracks
Inside ring
Removing Head & Installation of New Inside Ring
Liner Plates
installation of New Liner Plates
Removing and Installing Spindles in No. 312 Rotary Machines
Re-Installing
Removal of Spindle in DC & SS Type Machines
V-Belts
Bearings
Mandrel Swagging
Materials for Swaging
Spare Parts for :
100
111
211
312
323
433
434
436
438
1033
1047
4315
100-169
100-170
Die Closing Machines Parts and Drawing
Stationary Spindle Machine Parts and Drawing
Typical Die Designs


This Manual Has 43  Printed Pages.
Year 1969

Tornos M-7, Automatic Screw Machine Lathe, Operational Features & Tooling Manual

http://industrialmanuals.com/tornos-automatic-screw-machine-lathe-operational-features-tooling-manual-p-2229.php

Tornos M-7, Automatic Screw Machine, Lathe , Operations Facts, Features & Tooling Manual   

This Manual Covers Models:
M-7

This Manual Includes: 
Tornos Works
Moutier Suisse
Switzerland Automatic Screw Machines
Operating Instructions M-7, T 139
Operating Principles of Tornos Automatics
Resume of Important Points
Specifications (see prospectus)
parts List
Unpacking – Cleaning – Installation
Lubrication
Electrical Equipment
Setting Up Instructions
Tool-Head – Collet and Bushes
Headstock
Main Drive
Camshaft – Cams – Accelerator
Stock Feed Mechanism
Auxiliary Attachments, Special Devices

This Manual Has  62  Printed Pages.

Torit Cyclone 50 60 70 80, Dust Collector Install Operations and Service Manual

http://industrialmanuals.com/torit-cyclone-dust-collector-install-operations-service-manual-p-4753.php

Torit Cyclone 50 60 70 80 Models, Dust Collector Installation and Operation Manual Year (1998)

This Manual Covers Models:
50
60
70
80
54
75
64
66
81
84
 
This Manual Includes:
For Units Built After July 1998
A Complete Manual of Installation and Operations along with Optional Equipment.

This manual also has the following Wiring Diagrams:
Motor Starter
Control Box 50-80 Automatic Shaker with and without Transformer
Troubleshooting

Please view our photo Gallery for more Content

This Manual Has  38 Printed Pages.
Year 1998

Torit Cyclone 13 19 20 24 30 36 44, Dust Collector Operations and Service Manual

http://industrialmanuals.com/torit-cyclone-dust-collector-operations-service-manual-p-4754.php

Torit Cyclone 13 19 20 24 30 36 44, Dust Collector Installation Operations and Service Manual Year (1983)

This Manual Covers Models:
13
19
20
24
30
36
44
  This Manual Includes:
Installation instructions
Routine Maintenance
Troubleshooting
Please view our photo Gallery for more Content

This Manual Has  6 Printed Pages.
Year 1983

Torino AP 130, 150-175, Mode Lathe, Divisorio Universali, Italian Tooling Manual

http://industrialmanuals.com/torino-150175-mode-lathe-divisorio-universali-italian-tooling-manual-p-2230.php

Torino AP130, 150 & 175, Modello Lathe, Divisorio Universali, Italian Tooling Manual   

This Manual Covers Models:
Italian Language
AP130
AP150
AP175

This Manual Includes: 
Divisori Universali
Officina Meccanica Di Precisione
Sclaverano Giuseppe
Via Isonzo, 88
Caratteristiche
Complessivo Schematico
Descrizione E Funzionamento
Tabella Di Divisioni Indirette
Tabella Di Divisione Col Metodo Differenziale
Tabella Di Divisione Col Metodo Differenziale

This Manual Has  16  Printed Pages.

TOR Microtor D-330, Lathe, Spanish Instrucciones Sobre & Electricia Manual 1968

http://industrialmanuals.com/microtor-d330-lathe-spanish-instrucciones-sobre-electricia-manual-1968-p-4736.php

TOR Microtor D-330, Lathe, Spanish Installation and Electrical Instrucciones Sobre Manual Year (1968)

This Manual Covers Models:
D-330
E.P. 600 mm.
Espanol
 
This Manual Includes:
Instructions
Cubierta
Indice
Transporte
Carateristicas Principales
Designacion De Los Mandos
Velocidades E JE Principal – Pasos – Avances
Nariz Segun Din 55.022 Tamano 5
Verificacion
AnclaJe Y Nivelado
Esquema Electrico
Puesta En Marcha
Tensado Del E Je Principal, Husillo Transversal Y Charriot
Del Husillo Patron E La Correa
Lubrificacion
Refrigeracion
Cambio De Correa
MontaJe De La Zapata Del Freno
Ayerias Y Recombios
Cadena Cinematica
Instrucciones De Los Tapes
Notas
Esta Copia Manual es Intellecually Sonido

This Manual Has 30  Printed Pages.
Year 1968

Toolmex TUJ50M, Polamco Universal Lathe, Spare Parts Manual

http://industrialmanuals.com/toolmex-tuj50m-polamco-universal-lathe-spare-parts-manual-p-4317.php

Toolmex TUJ50M, Polamco Universal Lathe, Spare Parts Manual
 
This Manual Covers Models:
TU50M
  This Manual Includes:
Parts Lists
Functionally Illustrated Drawings Showing Component Identification
This Copy is Intellectually Sound

List of illustrations Totaling 65

Please View Our Photo Gallery for a list of Illustrations



This Manual Has 128 Printed Pages.

ToolMex Tarnow TUJ-50M, Polamco Spare Parts C, Appendix to Operations Manual

http://industrialmanuals.com/toolmex-tarnow-tuj50m-polamco-spare-parts-appendix-operations-manual-p-2541.php

ToolMex Tarnow TUJ-50M, Spare Parts Catalogue, Appendix to Operating Manual               

This Manual Covers Models: 
TUJ-50M
This Manual Includes: 
I.M. Inventory # T-104SB
List of Spare Parts:
Headstock
Bed
Swing Frame
Feed Box
Apron
Slide
Tailstock
Special Equipment
List of Electric Apparatus
List of Commercial Parts
This Manual Has  11 Printed Pages.

ToolMex Tarnow TUJ-50M, Polamco Lathe, Operating & Spare Parts Manual

http://industrialmanuals.com/toolmex-tarnow-tuj50m-polamco-lathe-operating-spare-parts-manual-p-2538.php

ToolMex Tarnow TUJ-50M, Lathe, Operating & Spare Parts Manual              

This Manual Covers Models: 
TUJ-50M

This Manual Includes: 
I.M. Inventory # T-101SB
Introduction:
Branches, Parts, Service
The TUJ50M Series Lathes:
Features, Efficiency , Adaptability
Description and Characteristics
specifications
Installation
Operation
Maintenance
Overhaul Cycle
This Manual Has  118 Printed Pages.

ToolMex Tarnow TUJ-50M, Polamco Lathe Operating Manual

http://industrialmanuals.com/toolmex-tarnow-tuj50m-polamco-lathe-operating-manual-p-2539.php

ToolMex Tarnow TUJ-50M, Engine Lathe, Operating Manual               

This Manual Covers Models: 
TUJ-50M

This Manual Includes: 
I.M. Inventory # T-107SB
List of Drawings on Page 4
Introduction
Technical Characteristics
Machining Process Characteristics
Preparing the Lathe for Starting
Operating the Lathe
Overhauls
Appendices
Special Versions of the Lathe
List of Drawings Totaling (40)
This Manual Has  96 Printed Pages.

Toolmex Polamco TPK90A1, Series Lathe Operations & Maintenance Manual

http://industrialmanuals.com/toolmex-polamco-tpk90a1-series-lathe-operations-maintenance-manual-p-4755.php

Toolmex TPK90A1 Series Lathe, Operations Manual

This Manual Covers Models:
TPK90A1
 
This Manual Includes:
Introduction:
A Word About Toomex
The TPK90 Series Lathes
Use of this Manual

Description and Characteristics
Advantages
Power Top Compound
Spindle

Specifications
Standard Equipment
Optional Equipment
Capacities (Working Dimensions)
Installation
Operation
Maintenance
Electrical-Layout of Electrical Panel
Geometrical Accuracy Checking Accuracy

This Manual Has 88  Printed Pages.

ToolMex Andrychow Tue 40, 17" Polamco Lathe, Technical Servicing Manual

http://industrialmanuals.com/toolmex-andrychow-polamco-lathe-technical-servicing-manual-year-p-2553.php

ToolMex Andrychow Tue 40, 17" Engine Lathe Technical Servicing Manual Year (1978)                

This Manual Covers Models: 
Tue 40
17"
17 Inch

This Manual Includes: 
Polamco
Metalexport
Warszawa Poland

Technical Characteristics
Range of Application
Preparation with Starting Up for Operation
Operation
Recommendations for and Sequence of Repairs
Enclosures
Electrical Wiring Diagrams
Repairs

This Manual Has  89 Printed Pages.
Year 1978

Toolmaker Frachier AC Pro Drive Spindle Speed Controller Install Operate Manual

http://industrialmanuals.com/toolmaker-frachier-drive-spindle-speed-controller-installation-operat-p-4735.php

Toolmaker Frachier AC Pro Drive, Spindle Speed Controller, Installation Manual

This Manual Covers Models:
Controller
 
This Manual Includes:
Introduction
Operation of the AC Pro Drive Controller
Setup
Tapping
Maintenance
Trouble Shooting
Installation
208V – 240V Wiring Diagram

This Manual Has 20  Printed Pages.

Tobin ARP TR-6700, Tapper Refacer Machine, Operations and Parts Manual 1982

http://industrialmanuals.com/tobin-tr6700-tapper-refacer-machine-operations-parts-manual-1982-p-4756.php

Tobin ARP TR-6700, Tapper Refacer Operations and Parts Manual Year (1982)

This Manual Covers Models:
TR-6700
 
This Manual Includes:
General Instructions
Operating Instructions
Parts List
Functionally Illustrated Drawings showing Component Identification

This Manual Has 14  Printed Pages.
Year 1982

Tinius Olsen Universal Testing Machine, Installation Controls & Operation Manual

http://industrialmanuals.com/tinius-olsen-universal-testing-machine-installation-controls-operation-manual-p-1641.php

Tinius Olsen Universal Testing Machine, Installation Controls & Operation Manual Year (1950)       

This Manual Covers Models:
Testing

This Manual Includes:Electro Matic Testing
Loading
Measuring
Recording
Indication with Automatic Controls
Load Ranges –Wide Spread 250-1
Extension Ranges 200-1
Straining Ranges 400-1
Specifications
General Description
Installation
Lubrication
Electrical Connections
Controls and Operation

Note: Schematics & Wiring Diagrams are Available for Sale Separately. E-Mail Sales @Industrialmanuals.com, for Details
This Manual Has 8 Printed Pages.

Tinius Olsen Type VZ-JP-EAA, Balancing Machine, Operation and Maint Manual

http://industrialmanuals.com/tinius-olsen-type-vzjpeaa-balancing-machine-operation-maint-manual-p-2237.php

Tinius Olsen Type VZ-JP-EAA, Static Balancing Machine, Operations and Maintenance Manual    

This Manual Covers Models:
EAA
VZ-JP-EAA
This Manual Includes: 
Vertical Rotating Spindle Static Balancing Machine
General Balancing Theory ( 6 pages )
Instructions
Procedure of Original Set Up
Setting Air Pressure for Jaws
Power Circuit
Interlocks
Tooling and Its Set Up Methods
Procedure of Balancing
Method of Balancing Part and Adaptor
Care and General Knowledge
Electric Operation
Phase Shifter and Calibration Controls
Reference Angle Circuit
Press and Press Tooling
Replacement of Seals and Bearings
General Drawings
This Manual Has  20  Printed Pages

Tinius Olsen Testing Machine Electormatic Lo-Torque Operators Instruction Manual

http://industrialmanuals.com/tinius-olsen-testing-machine-electormatic-lotorque-operators-instruction-manual-p-1642.php

Tinius Olsen Testing Machine, Electomatic Lo-Torque Bench Model Operators Instruction Manual Year (1955-60)       

This Manual Covers Models:
Testing
Lo-Torque

This Manual Includes:Mechanical Drawings
Introduction
Installation
Electrical Connections Diagrams
Description and Operation
Operations
Care & Maintenance
Schematic & Wiring Diagrams:
W-5491-Z8
Upper Plate for Electromatic & Super L with Ateotran
W-6540-Z
General Electric Full Wave ½ h.p., Thymotrol Elementary Diagram and Connection/Inner Connection Diagram
Magnetic Rev. Switch Connection DiagramThis Manual Has 47 Printed Pages.
Year 1955-60

Tinius Olsen EAA No. 257, Balancing Machine, Instructions Manual Year (1956)

http://industrialmanuals.com/tinius-olsen-balancing-machine-instructions-manual-year-1956-p-2236.php

Tinius Olsen EAA No. 257, Balancing Machine, Instructions Manual Year (1956)   

This Manual Covers Models:
EAA
No. 257

This Manual Includes: 
Horizontal Static-Dynamic Balancing Machine (Remote Control)
General SetUp and Assembly of Machine
Power Supply
Set Up
Procedure for Starting Elect-Dyne
Explanation of Calibration Methods
Mathematical Data for Calibrating Olsen Pivoted Cradle Balancing Machines
Maintenance
Theory of the Elect-Dyne
Reference Drawing 8-11-188
Elect-Dyne Type 321 – BA
Signal Tracing the Elect-Dyne
Phase Balance of the Elect-Dyne
Bias Adjustment of the Elect-Dyne Chassis
Bias Adjustment of the Elect-Dyne Chassis (Scope method)
Horizontal Balancing Machine
Dual Electronic Pulser Adjustments
Balancing Machine Motor Belt Adjustment
Wiring Diagram of Elect-Dyne
Xerox Copy is Intellectually Good
This Manual Has  22  Printed Pages.
Year 1956

Timesavers Series 300 Operating & Servicing Manual

http://industrialmanuals.com/timesavers-series-operating-servicing-manual-p-359.php

Timesavers Series 300 

Operating & Service Manual

Covers Models:

Series 300

Manual Includes:

Operating


Installation


Maintenance

Parts

Timesavers Series 100 Operating Service Schematics and Parts Manual

http://industrialmanuals.com/timesavers-series-operating-service-schematics-parts-manual-p-358.php

Timesavers Series 100 Operating & Service Manual

This Manual Covers Models:
Series 100
125-1M
Manual Includes:
I M Inventory T-121A
Operating

Installation

Maintenance
Schematics

Parts

Timesavers Series 100 Operating & Servicing Manual

http://industrialmanuals.com/timesavers-series-operating-servicing-manual-p-357.php

Timesavers Series 100

I.M. Inventory # T-119A 

Operating & Service Manual


Covers Models:

Series 100

Manual Includes:

Operating


Installation


Maintenance


Parts

Timesavers Model 648 & 948 Belt Sander Owners Manual

http://industrialmanuals.com/timesavers-model-belt-sander-owners-manual-p-356.php

Timesaver Model 648 & 948 Belt Sander Owners Manual


Covers Models:

648

948 

This Manual Covers:

I M inventory T-118A

Installation

Operation


Changing The Abrasive Belt


Tracking The Abrasive Belt


Conveyor Belt Tension & Tracking


Changing the conveyor belt


Setting the sanding Pressure


Parts List

Timesaver 200 Sander, Operations and parts Manual 1992

http://industrialmanuals.com/timesaver-sander-operations-parts-manual-1992-p-4988.php

Timesavers 200 Sander, Operations and Parts Manual Year (1992)
 
This Manual Covers Models:
200
237-3
This Manual Includes: I M Inventory S-161SB
Installation
Abrasive Belts
Setting the Machine for Sanding
General Operating Tips
Compressed Air System
Procedure for Checking Tracking System
Trouble Shooting Posi-trak Tracking
Drum Dressing
Drum Removal
Changing and Dressing Conveyor Belt
Alignments
Brakes
Machine Maintenance Information
Electrical Troubleshooting
Lubrication
Suggested Maintenance Schedule
Spare Parts Lists
Cleaning Inside of Machine
Assemblies and Blueprints

This Manual Has  104  Printed Pages.
Year 1992

Timesaver 100 Series, 125-1M, Positrak Owner's Manual 1983

http://industrialmanuals.com/timesaver-series-1251m-positrak-owners-manual-1983-p-4578.php

Timesaver 100 Series, 125-1M, Positrak, Owner’s Manual Year (1983)

This Manual Covers Models:
100 Series
125-1m
S/N 12044
 
This Manual Includes:
Safety
Instructions
operations
Troubleshooting
Adjustments
Conveyor Belt
Assembly
100 2hd Information
Variable Feed Speed
Thin Veneer Sanding Option
eye Safety Switch
Brakes
Electrical & Pneumatic parts Lists
Machine Parts Lists
Please Visit our Photo Gallery for more Content

This Manual Has 56 Printed Pages.
Year March 1 1983 with Supplement added
Rev. 8/10/82

Thomson 40KVA, Shell Base Plate Welder, Operation & Maintenance Manual Year 1969

http://industrialmanuals.com/thomson-40kva-shell-base-plate-welder-operation-maintenance-manual-year-1969-p-2240.php

Thomson 40 KVA, Shell Base Plate Welder, Operation & Maintenance Manual Year (1969)     

This Manual Covers Models:
40 KVA

This Manual Includes: 
S/N 18528
This Manual has been prepared for your convenience to help you install, operate, and maintain you welding machine.

Thomson Electric Welder:
Installation & Operating Instructions #62
Use & Care of Resistance Welding Equipment
Operations
Maintenance Manual
Diagrams & Information Include:
Air Piping
Water Line Instructions
#182 Seam Welder
#244 Shell Welder 1952
#182 Seam Welder Drive 2-2-1945
#182 Reduction in Clutch 2-26-1951
Solenoid Clutch Pull for #1 Clutch and Reduction Unit 1945
#182 Bracket & Gears 1951
Open fixture for 75MM Spherical Shell
Control Wiring Diagram
External Wiring Diagram
Internal Wiring Diagram
Schematics
Assembly of Sliding Clutch #1 Press 1942
Reduction Unit Assembly Diagram
6 large Diagrams

This Manual Has  100  Printed Pages.
Year 1969

Thomson 244 Series, Seam Shell Welder, Parts Lists - Schematics - Wiring Manual

http://industrialmanuals.com/thomson-series-seam-shell-welder-parts-lists-schematics-wiring-manual-p-2241.php

Thomson 244 Series, Seam Shell Welder, Parts Lists – Instructions – Installation Prints – Wiring Diagrams, Resistance Welding Machines Manual Year (1952)     

This Manual Covers Models:
244 Series

This Manual Includes: 
KVA 40
Installation & Operating Instructions #62A, #182A, #194, (or #184) Series Seam Welder
Machine Set UP
Preliminary Adjustments
Cam Timing
Heat Regulation
Starting and Operating
Service
Assembly Control Switches and Cam Brackets
Parts List Sheet PP47, Double Acting Air Cylinders & Diagram
Parts List PP59, Series 189-194 Shell Welder Bevel Gears & Drive
Parts List PP-60, Lower Section of Open Face Chuck
Parts List PP-45, Air Operated Head with Diagrams
parts List PP-61, Top View open Face Chucks
Internal Wiring Diagram
Control Wiring Diagram
Air Piping Diagram
Water Piping Diagram
Schematic
External Wiring Diagram
More Diagrams & Prints

This Manual Has  50  Printed Pages.
Year 1952

Thomson 100, T/C Mill Drilll Table, Operations Service and Parts Manual

http://industrialmanuals.com/thomson-mill-drilll-table-operations-service-parts-manual-p-4731.php

Thomson 100 T/C Mill Drill Table, Operations Service and parts Manual

This Manual Covers Models:
100
 
This Manual Includes:
Brief Description of Main Parts
Setting Up Mill Drill Table on your Machine
Milling or Drilling without Template and Using Template
Electrical System of Mill Drill Table
Care of Your Mill Drill table
Servicing instructions for Model 100
Disassembly of Mill Drill Table
Adjusting Mill Drill Table Clamps
Adjusting Microswitch
Replacing Stylus in Front Piece
Cleaning and Lubrication of Mill Drill Table
Functional Check of Mill Drill Table
Trouble Shooting Chart

This Manual Has 37  Printed Pages.

Thompson Type F, Tool Room Grinder A-401, Operations & Parts List Manual

http://industrialmanuals.com/thompson-type-tool-room-grinder-a401-operations-parts-list-manual-p-1756.php

Thompson Type F Tool Room Grinder A-401 Operation Instructions & Part Lists Manual                

This Manual Covers Models:
Type F

This Manual Includes:
I.M. Inventory # T-120A
Operating Instructions for Model F
Parts Lists with Photographic Component Identification
General Instructions
Hydraulic System
Lubrication
Operating Controls
Wheel Head
power Unit
Adjusting Gibs
Elevation Brake
Over-Run
Finish
Coolant
Rod Packing
Piping Diagram,
Figures Totaling (9)
Lubrication Diagram
This Manual Has 23 Printed Pages.

Thompson Type F, Tool Room Grinder A-401, Operation Instructions Manual

http://industrialmanuals.com/thompson-type-tool-room-grinder-a401-operation-instructions-manual-p-1755.php

Thompson Type F Tool Room Grinder A-401 Operation Instructions Manual                     

This Manual Covers Models:
Type F

This Manual Includes:Operating Instructions for Model F
General Instructions
Hydraulic System
Lubrication
Operating Controls
Wheel Head
power Unit
Adjusting Gibs
Elevation Brake
Over-Run
Finish
Coolant
Rod Packing
Piping Diagram,
Figures Totaling (9)
Lubrication DiagramThis Manual Has 12 Printed Pages.

Thompson Type C, Truform Surface Grinder Operating Instructions Manual Year 1950

http://industrialmanuals.com/thompson-type-truform-surface-grinder-operating-instructions-manual-year-1950-p-1751.php

Thompson Type C, Truform Surface Grinder Operating Instructions Manual Year (1950)               

This Manual Covers Models:
Type C

This Manual Includes:Preparatory Instruction for Thompson Truform
Operating Cycle for Initial Form Crushing of Grinding Wheel
Grinding Cycle for Thompson Truform
Work Roll Returning Cycle
Returning Cycle Between Grinds
Remedy for Faulty Grinding
Forming Fixture Roll Thread Dies
Circular Forming Attachment
Shave Tool Forming Fixture
Functions of Push Buttons and Selector Switches on the Swinging Push Button Station
Vickers Double and Two Pressure Pumps, VC Type Operation & Maintenance Information (19 pages)This Manual Has 46 Printed Pages.
Year 1950

Thompson Type C & CD, Truform Surface Grinder Operators Instruct & Parts Manual

http://industrialmanuals.com/thompson-type-truform-surface-grinder-operators-instruct-parts-manual-p-1752.php

Thompson Type C & CD, Truform Surface Grinder Operating Instructions & Parts Lists Manual               

This Manual Covers Models:
Type C
Type CD

This Manual Includes:General Instructions
Machine Specifications
Installation Instructions
Hydraulic System
Lubrication
Grinding Suggestions
Adjustments
Ordering Repair Parts
Leveling Bed Ways Instructions
Column Gibs
Figurative Drawings and Parts Lists
Telescope Pipe Assembly
Pull Type Table Cylinder Assembly
Saddle Assembly
Hand Cross Feed Assembly
Cross Feed Cylinder & Control Valve
Wheel Truer Assembly
Elevation Shafts & Nut
Power Elevation Controls
Wheel Head Assembly
Lubrication
Maintenance Hints: Give Filter Handle at Least One Complete Turn Every Day
Diagram of Controls Type C and CD
Service Instructions for Bijur Automatic Lubricating System for Y-C, Y-D & Y-M
Replace Filter Assembly at Least Once every YearThis Manual Has 36 Printed Pages.

Thompson Type B & C, Surface Grinding Machines Operating & Parts List Manual

http://industrialmanuals.com/thompson-type-surface-grinding-machines-operating-parts-list-manual-p-1750.php

Thompson Type B & C Surface Grinding Machines Operating Instructions & Parts Lists Manual          

This Manual Covers Models:
Type B
Type C
This Manual Includes:
Operating Instructions
General Instructions
Hydraulic System with Diagram
Spark Out
Table Retard
Lubrication
Adjusting Gibs
Wheel Head
Parts Lists and Component Identification Drawings
Assembly Drawings
Type C Elevation Assembly
Power Unit Instructions
Rod Packing
Operating Controls
Over-Run
Coolant
Grinding
Leveling Bed Ways
Automatic Down Feed (Obsolete 8-23-1946), (Optional Equipment)
Automatic Down Feed Diagram Drawing of Machine and Parts Lists
Automatic Down Feed With Power Elevation & Drawing & Parts Lists
Electric Elevation Type C
Lubrication Type B, Lubrication Type C

This Manual Has 31 Printed Pages.

Thompson Type 5EA, Glat Broach E, Grinding Machine Operation & Parts Manual 1940

http://industrialmanuals.com/thompson-type-glat-broach-grinding-machine-operation-parts-manual-1940-p-1753.php

Thompson Type 5EA, Auto Flat Broach E, Grinding Machine Operators Instruction & Parts List Manual Year (1940)                     

This Manual Covers Models:
Type 5EA
Broach E

This Manual Includes:Operating Instructions
General Instructions
Automatic Indexing Cycle, Surface Broaches
Indexing for round Broaches
Hydraulic System
Electrical System
Causes of Unsatisfactory Production or Finish
Packings
Leveling Bed Ways Instructions
Elevation Hand Wheel Assemblies, Type B
Part Lists & Assembly Drawings
Lubrication Charts
Assembly Bleed Valve
Master Valve
Head Elevation
Automatic Cross Fed Assembly No. YED-15
Taperway Cover Assembly
Knee Assembly
Tilting & Swiveling Chuck Assembly
Neutrofier Installation and Operating Instructions
Neutrofier Part list
Neutrofier Control Connections Diagram
Electrical Wiring Diagrams

Large Fold-Out Diagrams:
Electrical Wiring Diagrams
Hydraulic Diagram
Wheels –gx48 Broach Grinder   1-4-1939
Lubrication Chart
This Manual Has 37 Printed Pages.
Year 1940

Thompson True Form grinders, Operations Manual Year (1964)

http://industrialmanuals.com/thompson-true-form-grinders-operations-manual-year-1964-p-4732.php

Thompson True Form Grinders, Operations Manual Year (1964)

This Manual Covers Models:
True Form
  This Manual Includes:
Preparatory Instruction for Thompson Truform
Operating Cycle for Initial Form Crushing of Grinding Wheel
Grinding Cycle for Thompson Truform
Work Roll Re-truing Cycle
Re-truing Cycle Between Grinds
Remedy for Faulty Grinding
Forming Fixture Roll Thread Dies.
Circular Forming attachment
Shave Tool forming Fixture
Functions of Push Buttons and Selector Switches on the Swinging Push Button Station
Instructions for Operating the Shave Tool Attachment

This Manual Has 42  Printed Pages.
Year 1964