Warner & Swasey 2-AB Single Spindle Bar Automatic Operating Instructions Manual

http://industrialmanuals.com/warner-swasey-single-spindle-automatic-operating-instructions-manual-p-1838.php

Warner & Swasey 2AB Single Spindle Bar Automatic Operating Instructions Manual Year (1961)         

This Manual Covers Models:
2AB
2-AB

This Manual Includes:Setting Up
Operation
tool Clearances
Standard Tools and Attachments
Preventive Maintenance

Data Sheet
Preventive Maintenance Check List
Installation
Lubrication and Coolant
Electrical Controls
Staring and Stopping the 2AB Machine
Emergency Tool Withdrawal
Selection of Speeds and Fees
Hand Operation Control
Automatic Operation Control
Tapping and Threading Operations

Tooling and Setup
Standard Tool and Machine Data
Surface Speed Chart
Cutting time Chart
Thread Cutting Time Chart
This Manual Has 72 Printed Pages.
Year 1961

Warner & Swasey 2 Speed Lathe Machine Wiring Control Circuit Manual 1954

Warner Swasey 2 Speed Machine Wiring, A183372 A183374 Control Circuit Manual
 
This Manual Covers Models: 
1
2
3
4
M-1486 –
M-1330 Lot 179
M-1498 –
M-1200 Lot 405
M-1499 –
M-1420 Lot 242
M-2193 –
M-1740 Lot 209
 

This Manual Includes:
Connection Diagrams for Control Transformers
Wire Size Selection Chart
Multispeed Poly-phase Induction Motor Connections
Panel Internal Connections
Control Panel – Front View
Elementary Wiring Diagram
Wiring Diagrams for Size 1 2 3 & 4
Two Speed Starters – Constant Torque Consequent Pole
Allen Bradley
Arrow
Hart & Hegeman
Clark Controller
General Electric
Square D
Westinhouse

This Manual Has 2 Printed Pages.
Year 1954

Warner & Swasey 1AC Chucking Automatic, Lot 69 and Up, Operations Manual 1961

http://industrialmanuals.com/warner-swasey-chucking-automatic-operations-manual-1961-p-1834.php 

Warner & Swasey 1AC Single Spindle Chucking Automatic, Lot 69 and Up, Operating Instructions Manual Year (1961)         

This Manual Covers Models:
1AC

This Manual Includes:Machine Lot 69 and later
Data Sheet
Preventive Maintenance Check List
Introduction
Lubrication, Coolant, Air Control
Electrical Controls
Staring and Stopping the 1AC Machine
Selection of Speeds and Feeds
Hand Operation Control
Automatic Operation Control
Tapping and Threading Operations
Tooling Method on the 1AC
Setup Procedure (typical job)
Hints for More Efficient Set ups
Standard Tool and Machine Data
Standard Tools
1AC Standard Attachments
Metal Removal Capacity Chart
Surface Speed Chart
Cutting Time Chart
Threading Time ChartThis Manual Has 64 Printed Pages.
Year 1961

Warner & Swasey 1AC and 2AC Chucking Lathe, M-3200, Service and Part Manual 1954

http://industrialmanuals.com/warner-swasey-chucking-lathe-m3200-service-part-manual-1954-p-1833.php 

Warner & Swasey 1AC and 2AC Chucking Automatic, M-3200, Service and Parts Manual Year (1954)         

This Manual Covers Models:
1AC
2AC
M-3200
Start lot 15

This Manual Includes:
Machine Tool Standard Data Sheet
Model 3200 Start Lots 21 Electrical Parts Bulleting – D-214998
Motors
Pushbuttons
Starters and Contractors (Relays)
Limit Switches
Instructions for Timing Turret and Cross Slides
Instructions for Replacing Shear Pin on 1AC M-3030 Start Lot 39
Instructions for Replacing Shear Pin on 2AC M-3200 Start Lot 15
Instructions for Setting Indicators on Cross Slides and pentagon Bar
Lubrications
Installation Instructions and Parts Lists for S-P Power Chucks and Rotating Cylinders Model RH
and RC Rotating Hydraulic Cylinder

Repair Parts Lists:
Functional Illustrated Component Identification Diagrams
Plates 1 through Plate 16

This Manual Has 40 Printed Pages.
Year 1954

Warner & Swasey 1AC "How to Operate" Chucking Automatics Operators Manual 1955

http://industrialmanuals.com/warner-swasey-operate-chucking-automatics-operators-manual-1955-p-1843.php 

Warner & Swasey 1AC “How to Operate", Single Spindle Chucking Automatics, Lot 32 and Up, Operators Instructions Manual Year (1955)         

This Manual Covers Models:
Single Spindle
1AC
Lot 32 and Up

This Manual Includes:Data Sheet
Preventive Maintenance Check List
Introduction
Installation
Lubrication, Coolant, Air Control
Electrical Controls
Starting and Stopping the 1AC Machine
Selection of Speeds and Feeds
Hand Operation Control
Automatic Operation Control
Tapping and Threading Operations

Tooling Method on the 1AC
Metal Removal Capacity Chart
Standard Tool and Machine Data
Surface Speed Chart
Cutting time Chart
Threading Time ChartThis Manual Has 62 Printed Pages.
Year 1955

Warner & Swasey 14"and 18" Universal Grinding Instruction and Parts Manual 1972

http://industrialmanuals.com/warner-swasey-14and-universal-grinding-instruction-parts-manual-1972-p-1839.php 

Warner & Swasey 14" and 18" Type U, Universal Grinding Hand Operated and Semiautomatic Arrangements, Instruction and Parts List Manual Year (1972)         

This Manual Covers Models:
14"
18"


This Manual Includes:
Safety Section
Section 1: Uncrating , Erecting and Starting the Machine
Section II: Contruction
Section III: Operations
Section IV: Grinding Principles and General Procedure
Section V: Machines with Special Arrangements
 

Parts Drawings Totaling (16)
Illustrations Totaling (3)
Parts Lists
Functional Illustrated Component Identification Diagrams
Wheel Head Mounted Automatic Truing Device : Instruction and Parts Bulletin
This Manual Has 94 Printed Pages.
Year 1972

Warner & Swasey 10TF Control, NC Portion, Operations and Program Manual

http://industrialmanuals.com/warner-swasey-10tf-control-portion-operations-program-manual-p-5263.php 

Warner Swasey 10TF Control, How to Utilize NC Portion   Control, Operations and Program Manual
 
This Manual Covers Models: 
10TF
 

This Manual Includes:
To Start Machine
Use MDI
Load a Tape
Call a new Program Up
Insert Program thru Keyboard
Edit a Program
Punch a Tape
Setting a Material File on the Control
Setting a Tool Data File on the Control

This Manual Has 13 Printed Pages.

Warner & Swasey 1-A, M-470 Turret Lathe, Service and Parts Manual 1941

http://industrialmanuals.com/warner-swasey-m470-turret-lathe-service-parts-manual-1941-p-5254.php 

Warner & Swasey 1-A, M-470 Turret Lathe Service and Parts Manual Year (1941)
 
This Manual Covers Models: 
1-A
M-470

This Manual Includes:
Used with Model M-470
S/N 526639
Lot No. 1285
Erecting
Alignment
Nomenclature
Feed Train
Preselector
headstock
Cross Slide Carriage Unit
Operating Instructions for Taper Attachment
Power Feed Compound Cross Slide
Hexagon Turret Saddle Unit
Bar Chucks and Bar Feeds
Cross Sliding Hexagon Turret
lead Screw for Thread Cutting
Repair Parts Section
Functionally illustrated Drawings Showing Component Identification

This Manual Has 90 Printed Pages.
Year 1941

Warner & Swasey 0-AC Chucking Automatic, M-3830 Start Lot 14, Operation Manual

http://industrialmanuals.com/warner-swasey-chucking-automatic-m3830-start-operation-manual-p-1836.php 

Warner & Swasey 0AC Single Spindle Chucking Automatic, M-3830 Start Lot 14, Operating Instructions Manual Year (1964)         

This Manual Covers Models:
0-AC
M-3830
Starting Lot 14

This Manual Includes:Setting Up
Operation
tool Clearances
Standard Tools and Attachments
Preventive Maintenance

Data Sheet
Preventive Maintenance Check List
Introduction
Starting and Stopping the 0-AC Machine
Selection of Speeds and Feeds
hand operation Control
Automatic Operation Control
Tapping and Threading Operations
tooling Method On the 0-AC
Hints for More Efficient Set Ups
Standard Tool and Machine Data
0-AC Standard Attachments
Metal Removal Capacity Chart
Surface Speed Chart
Cutting time Chart
Threading Time Chart
Motor Reversal Capacity
Machine Idle Motion Constants
This Manual Has 54 Printed Pages.
Year 1964

Warner & Swasey "How to Machine Parts on Turret Lathes" Manual

http://industrialmanuals.com/warner-swasey-machine-parts-turret-lathes-manual-p-1832.php 

Warner & Swasey “How to Machine Parts On Turret Lathes", A Tooling Guide Manual Year (1944)        

This Manual Covers Models:
Reference Information
Tooling Guide

This Manual Includes:Introduction
Analyzing the Job:
Analyze the Job to Determine the type of tooling Required
Analyze the Basic Machining Operations Required
Grind and Set Cutters Set Machine Stops
Select Correct Cutting Speeds and Feeds

Drilling
Boring
Reaming
Recessing
Internal Threading
Combined Internal Operations
Turning
Facing
Grooving
Threading
Taper Turning
Combined External Operations

How to Combine Internal and External Operations
General Purpose Hexagon Turret Tools for Bar Work
Representative Bar Work and Tooling
Pins and Shoes
Plain Studs
Screws and bolts
Threaded Studs
Plain Shafts
Threaded Shafts
Tapered Shafts
Washers, Spacers and Collars
Small Gear Blanks and Clutch Cones
Small Bushings and Inserts

How to Set Up Universal Chucking Tools
Representative Chucking Work
General Purpose Hexagon turret Tools for Chucking Work
Tolls and Thrust Washers
Collars
Flanges
Sleeves and Inserts
Bushings and Gear Blanks
Cone Frictions and Pulleys and Sheaves
Irregularly Shaped Work
Practical Methods for Holding Irregularly Shaped Work
Production Planning
Combined Cuts
Multiple Cuts and Grinding Cutters
Setting Cutters and Stops
Cutting Speeds and Feeds
Aids to Operators and Charts and Tables
This Manual Has 64 Printed Pages.
Year 1944

Warner Swasey 2AC and 2AB Bar , Single Spindle Chucking Automatics Tape Manual

http://industrialmanuals.com/warner-swasey-single-spindle-chucking-automatics-tape-manual-p-1841.php 

Warner & Swasey 2AC and 2AB Bar, Single Spindle Chucking Automatics Tape Manual         

This Manual Covers Models:
Single Spindle
2AC
2AB

This Manual Includes:General Information
Preparation of Tape for 2AC Machine Functions
Setup and operation of Tape Controlled 2AC
Preparation of Tape for 2AB
Setup and Operation of Tape Controlled 2AB
Tape Splicing Method
Basic Information for Tape Planning
This Manual Has 48 Printed Pages.

Ward No. 3A Capstan Lathe, Single Pulley Headstock, Facts and Features Manual

http://industrialmanuals.com/ward-capstan-lathe-single-pulley-headstock-facts-features-manual-p-2276.php 

Ward No. 3A Capstan Lathe with Single Pulley Headstock, Edition 52 Section No. 1C., Facts and Features Manual   

This Manual Covers Models:No. 3A
Capstan
This Manual Includes: Standard Set of Tools and Toolholders for Bar Work, Steel – Brass and Chuck
Specifications
Illustrations:
Ward Machine
Headstock
Sliding Saddle and Cross Slide
Capstan Rest
Automatic Feed to Capstan Slide
Air Operated Chuck
The Automatic Chuck
View of Lathe with Automatic Chuck for Bar Work up to 1 1/2in.,
Automatic Feed To Capstan Slide, and Swing forward Covered Bar Feed
Taper Turning Attachment
Motor Drive
Tools and ToolHolder
Pump and Fittings
Foundation Plan
Capacity Chart
Spindle Dimensions This Manual Has 18 Printed Pages.

Waner & Swasey 3, M-2200 Start 1, Lathe Parts Manual 1959

http://industrialmanuals.com/waner-swasey-m2200-start-lathe-parts-manual-1959-p-5714.php 

Warner Swasey 3, M-2200 Start 1, turret Lathe Repair Parts Manual Year (1959)

This Manual Covers Models: 
3
2200
Start lot 1

This Manual Includes:
Parts Lists
Functionally illustrated Drawings showing component Identification
Hydraulic Diagrams

This Manual Has 36 Printed Pages.
Year 1959

Walters 100 Series, Oil Fired Spray Cleaning Machines Manual 1981

http://industrialmanuals.com/walters-series-fired-spray-cleaning-machines-manual-1981-p-5723.php 

Walters 100 Series, Oil Fired Square Shooter Hot Spray Cleaning Machines Manual Year (1981)

This Manual Covers Models: 
100 Series

This Manual Includes:
VHP Combination Models 103 and 109 with Powerblast
High Pressure Washer Model 101
Safety
Installation Instructions
Initial Startup Instructions and Checklist
Routine Operation
Maintenance
Trouble Shooting
Maintenance
Installation Drawing
General Assembly
Electrical Wiring

This Manual Has 57 Printed Pages.
Year 1981

Walker Turner, 900 & 1100, KTrecker, Drill Press, Parts & Instructions Manual

http://industrialmanuals.com/walker-turner-1100-ktrecker-drill-press-parts-instructions-manual-p-2277.php 

Walker Turner, 900 & 1100 Series 20 Inch, Kearney Trecker, Drill Press, Parts Lists and Instructions Manual Year (1948)    

This Manual Covers Models:1100 Series

This Manual Includes: Full Machine View Drawing
Instructions
Lubrication
Parts Lists
Functional Illustrated Drawings Showing Component Identification
900 Series Drill Presses General Instructions & Parts Lists Sheet DP93
RD1174J 1100 Series Radial Drill, General Instructions and Parts Listings
900 series Radial Saws Instruction Sheet No. RS 117, Wiring Diagram
RA1104,6,7,8 effective 1-1-48, Sheet RS 115, Instructions and Use of Blades
RA1104-6-7-8, 1100 Series Radial Saw, Parts List Sheet No. RA116
Series 900 8 Inch Tilting Arbor Saw TC 995-996-997-998, Sheet No. BS 8
TA1180BN Tilting Arbor Saw, Instruction Sheet BS114-R, and Parts Listings
CB-970 Bench Saw Parts List Instruction Sheet No. BS-98
MCB 1160-11150-51 16 Inch Band Saws instruction & Parts Listing MCB 1160
BW 740 12 Inch Band Saw Instruction & Parts Listing, BW 740
BN1135 & MBN1105 16 Inch Band Saw, Parts & Instruction Sheet No. BN112-R
BN905 and MBN935 Band Saws, Parts & Instruction Sheet No. BN91
S1140 Spindle Shaper Instruction Sheet No. SS94, Parts List SS93
L951-L-952-L1152 Lathes Instruction Sheet No. L52 (Revised), Series 900 & 1100
P911-912 Jointers Instruction Sheet No. P94, General Instructions and Parts Lists
P908-910 jointers, Instruction Sheet No. P92, With Parts Listings
J0915 Jig Saw Parts List and Instruction Sheet No. JS74
SM700-705 Surfacers Instruction Sheet No. Sm-71-1 (Rev.), Parts Listings
SFH and SFL Series Parts Listings
Motor Grinders Parts List No MG52
Permanent Reference
This Manual Has 98 Printed Pages.
Year 1948

Walker Turner 1100 Series, 20" Drill Press Parts and Instructions Manual 1950

http://industrialmanuals.com/walker-turner-1100-series-drill-press-parts-instructions-manual-1950-p-5708.php 

Walker Turner 1100 Series, 20” Drill Press Parts and Instructions Manual Year (1950)

This Manual Covers Models: 
1100 Series
Kearney Trecker

This Manual Includes:
Instructions
Lubrications
Parts Lists
Functionally illustrated Drawings showing Component Identifications

This Manual Has 27 Printed Pages.
Year May 1950

Walker MSD Series, Microprocessor Chuck Control Operations & Wiring Manual 1983

Walker MSD Series, Microprocessor Chuck Control, Operations and Wiring Manual
 
This Manual Covers Models: 
MSD Series
 

This Manual Includes:
Operating Instructions
Demag Cycle Steps
Installation Instructions
AC Input Wiring diagram
Control Mounting Guidelines
Specifications
Main Circuit Board
Control Interface Schematic
System Assembly
Dimensions and Charts
Wiring Schematic

This Manual Has 47  Printed Pages.
Year 1983

Wahli W 91, No. 6 - 105, Loader, List of Spare Parts, Rechange, Manual Year 1973

http://industrialmanuals.com/wahli-loader-list-spare-parts-rechange-manual-year-1973-p-2272.php 

Wahli W 91, No. 6 – 105, Loader, List of Spare Parts, Catalogue Des Pieces De Rechange, Ersatzteil – Katalog, Manual Year (1973)     

This Manual Covers Models:W 91
Tri-Ligual
No. 6 – 105

This Manual Includes: Parts Lists
Functional Illustrated Photographs Showing Component Identification
This Manual Has  93  Printed Pages.
Year March 1973

Wahli W 91, Loader, Start - Setting up - Maintenance Manual Year (1972)

http://industrialmanuals.com/wahli-loader-start-setting-maintenance-manual-year-1972-p-2273.php 

Wahli W 91, Loader, Start – Setting up – Maintenance Instructions Manual Year (1972)     

This Manual Covers Models:W 91

This Manual Includes: Instructions
Technical Data
Operating Methods
Change Gear Chart
Dimensions
Filling the oil tanks
Lubrication Chart
Starting up the Machine set up for Particular type of Component
Belt Tensioning
Speed Diagram
Setting the Slide
Setting the Workhead
Setting the Tailstock
Setting the workhead/ tailstock Assembly
Setting the Universal Loader Support
Setting the Cutter Head
Hydraulic Control Block
Electrical Control cabinet
De-Burring Attachment
Starting up the Machine
Accessories
5 Large Drawings-Electrical
This Manual Has   39 Printed Pages.
5 Large Diagrams
Year March 1972

Wahli W 37, Loader, Spare Parts, De Pieces de Rechange, Ersatzteil , Manual 1973

http://industrialmanuals.com/wahli-loader-spare-parts-pieces-rechange-ersatzteil-manual-1973-p-2271.php 

Wahli W 37, List of Spare Parts, Catalogue Des Pieces De Rechange, Ersatzteil – Katalog, Manual Year (1973)     

This Manual Covers Models:W37
Tri-Ligual
This Manual Includes: Chargeur Automatique
Ladegerat
Loader

Spare Parts Ordering
Functional Illustrated Photographs Showing Component Identification
Spare Parts Lists

This Manual Has  37  Printed Pages.
Year February 1973

Wahli W 37, Freres W 90 W 91, Auto Loader, Instructions Manual Year (1972)

http://industrialmanuals.com/wahli-freres-auto-loader-instructions-manual-year-1972-p-2270.php 

Wahli, Freres W 37 W 90 W 91, Auto Loader, Instructions Manual Year (1972)     

This Manual Covers Models:
W37
W90
W91
Tri-Ligual
This Manual Includes: 
1^st Edition
Technical Data
Mounting the Loader on the Machine
Centering the workpiece Holder
Centering the Stack of Wheels between the Arbors
Regulating the Feed Channel
Setting the W90 Cutter Had Attachment
Setting the Ejector
Pump and Tank

This Manual Has  10  Printed Pages.
Year 1972