Friday, January 30, 2015

Frozen Meals - TV Dinners

Did you know???

The first frozen meals were introduced in 1945 for use in Airplanes. Maxson Food systmes, Inc.

These were considered to be the first full meals in frozen form: however, they were never sold at retail for the public and only used by military and civilian airlines to heat up on the plane and serve. Each frozen meal was packaged on a divided plate know as a "StratoPlate" with each portion of the meal in its own section.Frozen meals became widespread to consumers in 1954, when Gilbert and Clarke SWANSON introduced "TV Dinners" of turkey, sweet potatoes, peas, and stuffing. They sold 10 million dinners in the first year. I was born a year earlier and during my youth had the pleasure of dining with them when my father was at work. I think that's were I learned to eat peas. We didn't have a microwave then and the oven made them eatable and NOT MUSHY! Then someone introduced pears and other fruit. The fruit was always burnt but these dinners were a staple in our home for 2 nights a week. Mmmmm!

CVA No. 8, K&T, Single Spindle Automatic Machine, Tools and Tooling Tech. Manual

http://www.industrialmanuals.com/single-spindle-automatic-machine-tools-tooling-tech-manual-p-2868.php 


CVA No. 8, K&T, Single Spindle Automatic Machine, Tools and Tooling Tech. Manual 
CVA No. 8, K&T, Single Spindle Automatic Machine, Tools and Tooling Tech. Manual 

CVA No. 8 Single Spindle Automatic Turning Machine, Tools and Tooling Technique Manual

This Manual Covers Models: 
Tools
Tooling Technique
Reference

This Manual Includes:
The Tooling and Cam Design Information contained in this Manual is Extracted from the Original Handbook.
Technique
Turning
V-Steady Box Tool
Balance Turning Tool
Knee Turning and Turning Swing tool
Swing Tool Guides and Steady
Forming and Parting Off
Toolpost for Square Tools
Drilling
Reaming
Threading
Button Dies and Dieholders
Knurling
Tapping
Centre and Face Tool
Pointing
Cam Design


This Manual Has  74 Printed Pages.

CVA Kearney trecker, Single Spindle Automatics, A Series, Parts Manual 1967

http://www.industrialmanuals.com/kearney-trecker-single-spindle-automatics-series-parts-manual-1967-p-2842.php 


CVA Kearney trecker, Single Spindle Automatics, A Series, Parts Manual 1967 
CVA Kearney trecker, Single Spindle Automatics, A Series, Parts Manual 1967 

CVA Kearney Trecker, Single Spindle Automatics, A Series, Replacement Parts Manual Year (1967)

This Manual Covers Models: 
A Series
A12
A16
A20

This Manual Includes:
Single Spindle Automatics
No. PD 1194
Parts Lists
Functional Illustrated Drawings showing Component Identification
This Manual Has  66 Printed Pages.
Year 1967

CVA Kearney Trecker, Bar Automatic Attachments, A Series, Parts Manual Year 1967

http://www.industrialmanuals.com/kearney-trecker-automatic-attachments-series-parts-manual-year-1967-p-2841.php 


CVA Kearney Trecker, Bar Automatic Attachments, A Series, Parts Manual Year 1967 

CVA Kearney Trecker, Bar Automatic Attachments, A Series, Replacement Parts Manual Year (1967)

This Manual Covers Models: 
A Series
Attachments

This Manual Includes:
Single Spindle Automatics
No. PD 1196
Part 1
Renewable Parts of the Machine Attachments
Parts Lists
Functional Illustrated Drawings showing Component Identification
This Manual Has  19 Printed Pages.
Year 1967

CVA Kearney Trecker No. 8, Single Spindle Automatic, Parts Manual Year (1960)

http://www.industrialmanuals.com/kearney-trecker-single-spindle-automatic-parts-manual-year-1960-p-2844.php 


CVA Kearney Trecker No. 8, Single Spindle Automatic, Parts Manual Year (1960) 

CVA Kearney Trecker No. 8, Single Spindle Automatic, Replacement Parts Manual Year (1960)

This Manual Covers Models: 
No. 8
8
Pub. 1111
S/N 83925 Onwards

This Manual Includes:
Publication No. PD 1111
Introduction
Stock Support
Bar Feed
Mechanical Lubrication System
Headstock
Cross Slides
Turret
Bed Mechanism
Backshaft
Cabinet Doors, etc.
Coolant System
Various Covers, Guards, etc.
Gearbox
Jockey Pulleys
Front and Turret Camshafts
Safety Clutch, Cross Drive and Wormwheel
Electrical Switchgear
Chains and Belts
Spanner Kit
Numerical Index of Parts
This Manual Has  56 Printed Pages.
Year 1960

CVA Kearney Trecker No. 8, Single Spindle Automatic, Operator's Manual

http://www.industrialmanuals.com/kearney-trecker-single-spindle-automatic-operators-manual-p-2843.php 


CVA Kearney Trecker No. 8, Single Spindle Automatic, Operator's Manual 
CVA Kearney Trecker No. 8, Single Spindle Automatic, Operator's Manual 

CVA Kearney Trecker No. 8, Single Spindle Automatic, Operator's Manual

This Manual Covers Models: 
No. 8
8

This Manual Includes:
Publication No. PD 1136
Introduction
Installation and Starting
General and Operating Principles
Construction and Functioning
Maintenance Information and Practical Operating Hints
Attachments
Charts, Diagrams and Index
This Manual Has  84 Printed Pages.

CVA Kearney Trecker No. 8, Single Spindle Automatic Attachments, Parts Manual

http://www.industrialmanuals.com/kearney-trecker-single-spindle-automatic-attachments-parts-manual-p-2846.php 


CVA Kearney Trecker No. 8, Single Spindle Automatic Attachments, Parts Manual 
CVA Kearney Trecker No. 8, Single Spindle Automatic Attachments, Parts Manual 

CVA Kearney Trecker No. 8, Single Spindle Automatic Attachments, Replacement Parts Manual

This Manual Covers Models: 
No. 8

This Manual Includes:
Attachments:
De-burring
Slotting
Vertical Slide
Overhead Turning
Cross Drilling
High Speed Drilling
Tap or Die Revolving
Combination Drilling and Tapping
Combination Cross Drilling and High Speed Drilling
Turret Milling
Nut Tapping
This Manual Has  31 Printed Pages.

CVA Kearney Trecker A Series, A12 - A16 - A20, Operator's Manual Year (1966)

http://www.industrialmanuals.com/kearney-trecker-series-operators-manual-year-1966-p-2845.php 


CVA Kearney Trecker A Series, A12 - A16 - A20, Operator's Manual Year (1966) 
CVA Kearney Trecker A Series, A12 - A16 - A20, Operator's Manual Year (1966) 

CVA Kearney Trecker A Series, A12 – A16 – A20, Operator's Manual Year (1966)

This Manual Covers Models: 
A Series
A12
A16
A20
Single Spindle Automatics

This Manual Includes:
Introduction
Section I: Principals of Machine Operation
Section II: Installation and Starting
Section III: Specifications
Section IV: Construction of the Machine
Section V: Cam and Tool Data
Section VI: Maintenance Instructions
This Manual Has  74 Printed Pages.
Year 1966

Cuttermaster HDT, End Mill grinding, Operations & Parts List Manual

http://www.industrialmanuals.com/cuttermaster-mill-grinding-operations-parts-list-manual-p-2858.php 


Cuttermaster HDT, End Mill grinding, Operations & Parts List Manual 
Cuttermaster HDT, End Mill grinding, Operations & Parts List Manual 

Cuttermaster HDT, End Mill Grinding, Operations & Parts List Manual

This Manual Covers Models: 
HDT

This Manual Includes:
End Mill Grinding Made Easy
Parts Breakdown
Cutter Specifications
Construction
Warranty
Operating Instructions
The Radius Attachment
Troubleshooting
Cams: Grinding Countersinks, Taps and Drills
To Set Up and Grind Taps
Grinding Drills
Motor and Wheel Parts List
Air Spindle Parts Lists
Base Parts List
Screws of the Sleeve
Screws of the Air Spindle
Screws of the Base
Buckle Rings
Bearings
Pins
Keys
Oil inlet
Functional Illustrated Drawing Showing Component Identification


This Manual Has  23 Printed Pages.

Tuesday, January 27, 2015

Cushman Industries, Facts & Features Manual Year (1974-77)

http://www.industrialmanuals.com/cushman-industries-facts-features-manual-year-197477-p-2878.php 


Cushman Industries, Facts & Features Manual Year (1974-77) 
 
 Cushman Industries, Facts & Features Manual Year (1974-77)  

This Manual Covers Models: 
Reference Information
1974-77 Tooling

This Manual Includes: 
Manual and Power Chuck Price List from 1977 for Reference and Parts
Series 63000 Reference and Parts, nomenclature, Facts & Features
Quick Change Top Tooling Brochure
Tri Action Draw Down Chuck Brochure
High Low Chucking Control System Brochure
Automatic Indexing Brochure
Three Jaw, Self-Centering Welding Chuck
Cushman Indexing Spacers
Cushman Rotary Tables (Discontinued)
Bulletins for Chuck Dimensions, Air Cylinders
Mountings for Adapter Plates

This Manual Has 43  Printed Pages.
Year 1974

Curvatubi MLM, B/40, Cataligo Ricambi, Pipe Bending Spare Parts Manual

http://www.industrialmanuals.com/curvatubi-cataligo-ricambi-pipe-bending-spare-parts-manual-p-1952.php 


Curvatubi MLM, B/40, Cataligo Ricambi, Pipe Bending Spare Parts Manual 
 
 Curvatubi BLM, B/40 Cataligo Ricambi, Ersatzteilen-Katalog, Pipe Bending Machine, Spare Parts Manual       

This Manual Covers Models:
B/40

This Manual Includes:
Catalogo Ricambi
Ersatzteilen-Katalog
Spare Parts Catalogue
Catalogue Des Pieces De Rechange

Macchina Curvatubi
Rohrbiegemaschine
Pipe Bending Machine
Machine A Cintrer

Spare Parts Catalog



This Manual Has 31 Printed Pages.

Curvatubi BLM, B/4X Catligo Ricambi, Italian, Pipe Bending, Spare Parts Manual

http://www.industrialmanuals.com/curvatubi-catligo-ricambi-italian-pipe-bending-spare-parts-manual-p-1951.php 


BPR Curvatrici, Eagle Bender CP30P, Universal Bending Roll, Operations Manual 
BPR Curvatrici, Eagle Bender CP30P, Universal Bending Roll, Operations Manual 

Curvatubi BLM, B/4X Cataligo Ricambi, Italian, Pipe Bending Machine, Spare Parts Manual       

This Manual Covers Models:
B/4X

This Manual Includes:

Catalogo Ricambi
Ersatzteilen-Katalog
Spare Parts Catalogue
Catalogue Des Pieces De Rechange

Macchina Curvatubi
Rohrbiegemaschine
Pipe Bending Machine
Machine A Cintrer


This Manual Has 31 Printed Pages.

Curvatrici CS50 Bending Machine Operations Manual Year (1986)

http://www.industrialmanuals.com/curvatrici-cs50-bending-machine-operations-manual-year-1986-p-1774.php 


Curvatrici CS50 Bending Machine Operations Manual Year (1986) 
 
 Curvatrici CS50 Bending Machine Operations Manual Year (1986)        

This Manual Covers Models:
CS50

This Manual Includes:
Technical Characteristics
Lifting, Tilting and Installation
How to Use Straighteners
Lubrication
Maintenance
Conditions for Working
Arrangement for Working
Edging Plate Section Bending
Flat Section Bending in a Flat Way
Square Section Bending
Angular Section Bending with External and Internal Leg
T Section Bending with Internal Leg
Round Section Bending Tubes
F-1, 2, 3, and 4 to Marrone (Diagram)
This Manual Has 23 Printed Pages.
Year 1986

CTD A480E 16" x 20" Automatic Saw, Operation, Maintenance and Parts Manual

http://www.industrialmanuals.com/a480e-automatic-operation-maintenance-parts-manual-p-1769.php 


CTD A480E 16" x 20" Automatic Saw, Operation, Maintenance and Parts Manual 
 
 CTD A480E 16" x 20" Automatic Saw, Operators Instruction Maintenance and Parts Manual Year (2003)       

This Manual Covers Models:
A480E

This Manual Includes:
Machine Requirements
Installation and Setup
Electrical Installation
General Operating Instructions
Safety Instructions
How to Operate the Machine
Safeties and Interlocks
Setting Length Adjustment Block
Manual Mode
Trial Mode
Automatic Mode
Repair and Service PLC Input/Output Test Procedure
Spindle and Pivot Shaft Diagrams
Preventative  Maintenance
Parts List
Electrical Schematic
Air Logic

This Manual Has 28 Printed Pages.
Year 2003

Crystal Lake, Cylindrical Grinder, Operators Instructions Manual

http://www.industrialmanuals.com/crystal-lake-cylindrical-grinder-operators-instructions-manual-p-2864.php 


Crystal Lake, Cylindrical Grinder, Operators Instructions Manual 


Crystal Lake, Cylindrical Grinder, Operators Instruction Manual

This Manual Covers Models: 
500 Series

This Manual Includes:
Unpacking
Cleaning
Mountings – Cabinet or Bench
Main Tables
Swivel Tables
Bearings
Oiling
Headstock
Component Parts for Headstock
Tailstock with Component Parts
Gears
Wheel Slides and Parts for Wheelhead
Wheelhead Information
Grinding Wheels
Hints for Trouble Shooting

This Manual Has  9 Printed Pages.

Crozier Lathe, Operators Facts Features & Parts List Diagrams Manual

http://www.industrialmanuals.com/crozier-lathe-operators-facts-features-parts-list-diagrams-manual-p-2865.php 


Crozier Lathe, Operators Facts Features & Parts List Diagrams Manual 
 
 Crozier Operators Facts Features & Parts List Diagrams Manual

This Manual Covers Models: 
General
VPL
NPL Series
BPL
CPL

This Manual Includes:
Vacuum Grip Speed Lathe
VPL & NPL Series
Operation
Parts List


This Manual Has  8 Printed Pages.

Crown DSL-900CH, Bench Lathe, Specs Operation Setup & Parts List Manual

http://www.industrialmanuals.com/crown-dsl900ch-bench-lathe-specs-operation-setup-parts-list-manual-p-2857.php 


Crown DSL-900CH, Bench Lathe, Specs Operation Setup & Parts List Manual 

Crown DSL-900CH, Bench Lathe, Specs Setup & Parts Lists Manual

This Manual Covers Models: 
DSL-900CH

This Manual Includes:
Specifications
Special Accessories
Standard Equipment
General Dimensions
Installation
Leveling
Electrical
Lubricating Charts
Operating Instructions
Parts Lists:
Headstock
Bed
Apron
Gear Box
Tailstock
Transmission System
Saddle

Functional Illustrated Drawings Showing Component Identification

This Manual Has  48 Printed Pages.

Monday, January 26, 2015

Cross Service No. 55 Universal Gear Chamfering Machine Manual

http://www.industrialmanuals.com/cross-service-universal-gear-chamfering-machine-manual-p-711.php 


Cross Service No. 55 Universal Gear Chamfering Machine Manual 
Cross Service No. 55 Universal Gear Chamfering Machine Manual 
Cross Service No. 55 Universal Gear Chamfering Machine Manual 

Cross Service No.55 Universal Gear Chamfering Machine Manual
This Manual Covers Models:

No. 55
#55
This Manual Includes:

Service Manual is for reference Purposes Only
Outline Drawing of No. 55 Machine
Wiring Diagram, Base, Work Head Cutter Head Column
Hydraulic Cylinder, Drive Shaft, Extension Drive
hydraulic Pump and Motor Assembly, Hydraulic Diagram
Draw Bar, No. 55 universal Fixture
Much More!
This Manual Has‚ 14‚ Pages.


Cross PA-125-12. 25 Ton C-Frame Press, Service Manual Year (1971)

http://www.industrialmanuals.com/cross-pa12512-cframe-press-service-manual-year-1971-p-3388.php 


Cross PA-125-12. 25 Ton C-Frame Press, Service Manual Year (1971) 
Cross PA-125-12. 25 Ton C-Frame Press, Service Manual Year (1971) 

Cross PA-125-12, 25 Ton C-Frame Press, Service Manual

This Manual Covers Models:  
PA-125-12,
25 Ton


This Manual Includes:   

Assembly Press, (Colonial)
Hydraulic Press
Machine Data
Colonial Assembly or Straightening Presses all Models
Installation Instructions
Outline of Service Manual
Please visit our photo gallery for more content.


This Manual Complete Has 34 Printed Pages.
Year May 1971
72-0544 S/N

Cross Model 55, Universal Geaer Chamfering Machine, Service Parts Manual

http://www.industrialmanuals.com/cross-model-universal-geaer-chamfering-machine-service-parts-manual-p-3387.php 


Cross Model 55, Universal Geaer Chamfering Machine, Service Parts Manual 
Cross Model 55, Universal Geaer Chamfering Machine, Service Parts Manual 

Cross Model 55, Universal Gear Chamfering Machine, Service Parts Manual

This Manual Covers Models:  
55

This Manual Includes:   
Parts and identification Diagrams
Specifications
Lubrication Diagram
Machine Drive Diagram
4 page Gear Chart
How to Set the Machine to Cut a Part
How to start the Machine
How to estimate Production
Base Diagram
Parts List, Base Service Drawing Number 226362
Parts List Cutter Head column Service Drawing 226363
Parts List for Drive shaft , Service Drawing 226364
Parts List for Work Head , Service Drawing 226365
Parts List for Extension drive , Service Drawing 226366
and Parts List for Cutter Head Service Drawing 226367
226368 Hydraulic Cylinder Service Drawing 226368
276369 Hydraulic Network
Parts List for Electrical Network Service Drawing 226370
Parts List for Push Button Station Service Drawing 226371
Universal Work Holding Fixture 239648
Loaded with Parts:
Gear Diameter Capacity up to 18 inches or 457 millimeters

Please visit our photo gallery for more content.


This Manual Complete Has 40 Printed Pages.
Year 1971

Crescent 3000 Series, Pratt W, 3-Dimensional Tracer, Operations & Maintc Manual

http://www.industrialmanuals.com/crescent-3000-series-pratt-3dimensional-tracer-operations-maintc-manual-p-2859.php 


Crescent 3000 Series, Pratt W, 3-Dimensional Tracer, Operations & Maintc Manual 
Crescent 3000 Series, Pratt W, 3-Dimensional Tracer, Operations & Maintc Manual 

Crescent 3000 Series, Pratt Whitney, 3-Dimensional Tracer, Operations & Maintenance Manual

This Manual Covers Models: 
3000 Series

This Manual Includes:
General Information
Operation
Maintenance

List of Illustrations:
Operating Controls
Safety Switch Reset Button
Pressure-Exhaust and Cylinder Ports
Stylus Spindle Reassembly
Locknut Removal and Installation
Lockwasher Staking
Half-Nut Pin Thread Alignment
Center Ring Setting
360 Feed Rate Setting
Slide Movement Timing (Example)
Parts Drawing
This Manual Has  32 Printed Pages.

Craftsman Sears 103.23622, Drill Press, Operations and Parts Manual Year (1951)

http://www.industrialmanuals.com/craftsman-sears-10323622-drill-press-operations-parts-manual-year-1951-p-3003.php 


Craftsman Sears 103.23622, Drill Press, Operations and Parts Manual Year (1951) 
 
 Craftsman Sears 103.23622, Drill Press, Operations and Parts Manual Year (1951)

This Manual Covers Models: 
103.23141

This Manual Includes:
Instructions for Ordering Parts
Operating Instructions
Assembly
Parts List
Safety
Installation
Motor
Speed
Lubrication
Controls
Adjustments
Type of Bits
Drill Sharpening
Functional Illustrated Diagram showing Component Identification
This Manual Has  6 Printed Pages.
Year June 1951

Craftsman Sears 103.23141, Drill Press, Operations and Parts Manual Year (1951)

http://www.industrialmanuals.com/craftsman-sears-10323141-drill-press-operations-parts-manual-year-1951-p-3002.php 


Craftsman Sears 103.23141, Drill Press, Operations and Parts Manual Year (1951) 
 
 Craftsman Sears 103.23141, Drill Press, Operations and Parts Manual Year (1951)

This Manual Covers Models: 
103.23141

This Manual Includes:

Instructions for Ordering Parts
Operating Instructions
Assembly
Parts List
Safety
Installation
Motor
Speed
Lubrication
Controls
Adjustments
Type of Bits
Drill Sharpening
Functional Illustrated Diagram showing Component Identification

This Manual Has  6 Printed Pages.
Year June 1951

Craftsman Model 113.22521, Belt & Disk Sander, Operation & Parts Manual 1976

http://www.industrialmanuals.com/craftsman-model-11322521-belt-disk-sander-operation-parts-manual-1976-p-2524.php 


Craftsman Model 113.22521, Belt & Disk Sander, Operation & Parts Manual 1976 
 
 Craftsman Model 113.22521, Belt & Disk Sander, Owners Operation & Parts Manual Year (1976)             

This Manual Covers Models: 
113.22521
This Manual Includes: 
I.M. Inventory # S-107SB
Assembly Operating and Repair Parts
General Safety Instructions
Motor Specifications and Electrical Requirements
Unpacking and Checking contents
Assembly
Getting to know your Belt and Disc Sander Information
Basic Operations
Maintenance
Lubrication
Trouble Shooting
Repair Parts
Functional Illustrated Drawings Showing component Identification
This Manual Has  28 Printed Pages.
Year November 1976

Craftsman Esmeriladora Angular, DE 114 mm, 900.277230, Operacion Partes Manual

http://www.industrialmanuals.com/craftsman-esmeriladora-angular-900277230-operacion-partes-manual-p-1963.php 


Craftsman Esmeriladora Angular, DE 114 mm, 900.277230, Operacion Partes Manual 
 
 Craftsman Esmeriladora Angular, Grinder, DE 114 mm (4 ½"), 900.277230, Operacion Partes Manual (1996)          

This Manual Covers Models:
DE 114 mm
900.277230
Spanish

This Manual Includes:

Introduccion
Operacion
Mantenimiento
Partes de Repuesto

This Manual Has  15 Printed Pages.

Craftsman drill Grinding Attachment 6677, Mounting - Operations Manual

http://www.industrialmanuals.com/craftsman-drill-grinding-attachment-6677-mounting-operations-manual-p-2471.php 


Craftsman drill Grinding Attachment 6677, Mounting - Operations Manual 
 
 Craftsman Drill Grinding Attachment 6677, Mounting – Operations & Charts Manual      

This Manual Covers Models: 
6677
This Manual Includes: 
I.M. Inventory # C-104SB
Mounting the Attachment
Operating Instructions
This Manual Has 6 Printed Pages.

Craftsman 900.277230, 4 1/2" Angle Grinder, Operation & Repair Parts Manual

http://www.industrialmanuals.com/craftsman-900277230-angle-grinder-operation-repair-parts-manual-p-1960.php 


Craftsman 900.277230, 4 ½" Angle Grinder, Operation Maintenance and Repair Parts Manual         

This Manual Covers Models:
900.277230
4 ½"


This Manual Includes:

Introduction
Operation
Maintenance
Repair Parts

This Manual Has  9 Printed Pages.

Craftsman 315.271430, Electric Drill, Operation, Maintenance and Parts Manual

http://www.industrialmanuals.com/craftsman-315271430-electric-drill-operation-maintenance-parts-manual-p-1964.php 


Craftsman 315.271430, Electric Drill, Operation, Maintenance and Parts Manual 
 
 Craftsman 315.271430, Electric Drill, Operation Maintenance & Repair Parts Manual          

This Manual Covers Models:
315.271430

This Manual Includes:

Introduction
Operation
Maintenance,
Repair Parts

This Manual Has  10 Printed Pages.

Craftsman 3/8" Industrial Electric Drill, Owner's Manual Year (1993)

http://www.industrialmanuals.com/craftsman-industrial-electric-drill-owners-manual-year-1993-p-1967.php 


Craftsman 3/8" Industrial Electric Drill, Owner's Manual Year (1993) 
 
 Crafstman 3/8" Industrial Electric Drill, Owners Manual Year (1993)          

This Manual Covers Models:
315.271410

This Manual Includes:

Introduction
Operation
Maintenance
Repair Parts

This Manual Has  12 Printed Pages.
Year June 1993

Sunday, January 25, 2015

Craftsman 12 Inch, 101.06403, Metal Turning Lathe, Parts List Manual

http://www.industrialmanuals.com/craftsman-inch-10106403-metal-turning-lathe-parts-list-manual-p-3005.php 


Craftsman 12 Inch, 101.06403, Metal Turning Lathe, Parts List Manual 
 
 Craftsman12 Inch, 101.06403, Metal Turning Lathe, Parts List Manual

This Manual Covers Models: 
½ H.P.

This Manual Includes:
Ordering Parts
Functional Illustrated Diagrams showing Component Identification
Parts List

This Manual Has  4 Printed Pages.

Craftsman 1/3 h.p., Grinder, Assembly Instructions and Parts List Manual 1965

Craftsman 1/2 h.p., Split-Phase Type Motor, Operating Instruction & Parts Manual

http://www.industrialmanuals.com/craftsman-splitphase-type-motor-operating-instruction-parts-manual-p-3004.php 


Craftsman ½ h.p., Split-Phase Type Motor, Operating Instructions and Parts List Manual

This Manual Covers Models: 
½ H.P.

This Manual Includes:
Ordering Parts
Functional Illustrated Drawing showing Component Identification
Parts List
Mounting motor
Connecting Motor
Lubrication and Maintenance
Guarantee
This Manual Has  4 Printed Pages.

Covel Operators Instruction Parts No. 7A 6 x 12 Surface Grinder Machine Manual

http://www.industrialmanuals.com/covel-operators-instruction-parts-surface-grinder-machine-manual-p-713.php 


Covel Operators Instruction Parts No. 7A 6 x 12 Surface Grinder Machine Manual 
Covel Operators Instruction Parts No. 7A 6 x 12 Surface Grinder Machine Manual 

Covel Operators Instruction-Parts Excel No 7A 6" X 12" Hand Feed Surface Grinder Machine Manual  
This Manual Covers Models:No. 7A
# 7A

This Manual Includes:
Operating Instructions
Direct Drive Spindle
Installation, Adjustments, Lubrication
General Assembly Diagrams
Illustration Parts Diagrams
Year 1959
Much More!

This Manual Has 22 Pages.

Covel Operators Instruction Parts No 17 10 x 16 Surface Grinder Machine Manual

http://www.industrialmanuals.com/covel-operators-instruction-parts-surface-grinder-machine-manual-p-714.php 


Covel Operators Instruction Parts No 17 10 x 16 Surface Grinder Machine Manual 
Covel Operators Instruction Parts No 17 10 x 16 Surface Grinder Machine Manual 

Covel Operators Instruction Parts No 17 10 x 16 Hand Feed Surface Grinder Machine Manual ‚ 
This Manual Covers Models:No. 17
# 17

This Manual Includes:
Operating Instructions
Illustrated Parts List
Installation, Adjustments, Lubrication
General Assembly Diagrams:
Table hand Feed, Spindle, Elevating Screw,
Table Drive Assembly Diagram
Illustration Parts Diagrams
Much More!

This Manual Has‚ 15 Pages.

Covel No. 35A & 50, Surface Grinders, Installation Operations Parts Manual 1947

http://www.industrialmanuals.com/covel-surface-grinders-installation-operations-parts-manual-1947-p-2861.php 


Covel No. 35A & 50, Surface Grinders, Installation Operations Parts Manual 1947 
Covel No. 35A & 50, Surface Grinders, Installation Operations Parts Manual 1947 

Covel No. 35A & 60, Surface Grinders, Install Operations & Spare Parts Manual Year (1947)

This Manual Covers Models: 
35A
60

This Manual Includes:
Instructions
Cleaning the Hydraulic Systems No. 5 & 20
Lubrications
Parts Lists
Functional Illustrated Drawings showing Component Identification
This Manual Has  40 Printed Pages.
Year March 1947

Covel No. 15, Handfeed, Surface Grinder, Operations Manual

http://www.industrialmanuals.com/covel-handfeed-surface-grinder-operations-manual-p-2860.php 


Covel No. 15, Handfeed, Surface Grinder, Operations Manual 
Covel No. 15, Handfeed, Surface Grinder, Operations Manual 

Covel No. 15, Handfeed, Surface Grinder, Operations Manual

This Manual Covers Models: 
No. 15

This Manual Includes:
Installation
Operation
Lubrication
Adjustments
Parts Lists
Functional Illustrated Drawings Showing Component Identification
This Manual Has  10 Printed Pages.

Covel Instruction Parts No. 14 Optical Comparator Manual

http://www.industrialmanuals.com/covel-instruction-parts-optical-comparator-manual-p-712.php 


Covel Instruction Parts No. 14 Optical Comparator Manual 
Covel Instruction Parts No. 14 Optical Comparator Manual 

Covel Operators Instruction Optical Comparator No. 14 Manual ‚ 
This Manual Covers Models:No. 14
#14

This Manual Includes:
Operating Instructions
Vertical Measuring, horizontal Measuring, Angular Measuring
Optical Comparator, Radius Measuring, Projection Lense Changing
Different Magnification, Changing light Bulbs,
Removing Mirror for Cleaning
Surface Illumination, Wall Effect, Pointer and Focal Plane
Lens Assembly, Stage, Screen and Mirror Assembly
Comparator Inspection
Specifications and Attachments
Much More!

This Manual Has‚ 20 Pages.